Jaap Crezee pisze: > Hi All, > > I searched all of this maillist for hints on S2-3200 and CAM modules, but found nothing. > I hope someone can give me a starting point for debug. > > When I insert my Astoncrypt CAM module into my TT Budget S2-3200 card, scanning is no longer possible. Also getting any > data out of /dev/dvb/adapter0/dvr0 is not working. Tuning is still working (or at least, it seems...), I still can get a > FE_LOCK. No difference when I also insert my Canaldigitaal smartcard in the CAM module; same result. > > I use the current multiproto HG tree (http://jusst.de/hg/multiproto , HEAD) > I use the current dvb-apps HG tree (http://linuxtv.org/hg/dvb-apps , HEAD) > > My cam device is initialised: > > <snip> > DVB CAM validated successfully > dvb_ca_en50221_link_init > dvb_ca_en50221_wait_if_status > dvb_ca_en50221_wait_if_status succeeded timeout:0 > dvb_ca_en50221_read_data > Received CA packet for slot 0 connection id 0x0 last_frag:1 size:0x2 > Chosen link buffer size of 16 > dvb_ca_en50221_wait_if_status > dvb_ca_en50221_wait_if_status succeeded timeout:0 > dvb_ca_en50221_write_data > Wrote CA packet for slot 0, connection id 0x0 last_frag:1 size:0x2 > dvb_ca adapter 0: DVB CAM detected and initialised successfully > </snip> > > Again, when I remove the CAM module, everything works fine (as for FTA channels...). Tools like dvbdate, dvbtraffic and > mplayer /dev/dvb/adapter0/dvr0 work fine. > > Any help in where to start debugging whould be very kind! > > Regards, > > Jaap Crezee > > > > -------------------- > > > > Some more info: > > 02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH S2-3200 > > jaap@server /dev/dvb/adapter0 $ lsmod | grep -E "dvb|stb|lnb|budget" > lnbp21 1920 1 > stb6100 6404 1 > stb0899 34180 1 > budget_ci 21636 3 > firmware_class 7040 1 budget_ci > budget_core 9348 1 budget_ci > saa7146 15880 2 budget_ci,budget_core > ttpci_eeprom 2304 1 budget_core > ir_common 40708 1 budget_ci > dvb_core 79744 2 budget_ci,budget_core > i2c_core 21264 9 lnbp21,stb6100,stb0899,budget_ci,budget_core,ttpci_eeprom,eeprom,i2c_i801,i2c_dev > crc32 4224 3 dvb_core,tun,skge > jaap@server /dev/dvb/adapter0 $ > > > Kernel 2.6.26.5 , 'normal' x86 platform.... > > jaap@server /dev/dvb/adapter0 $ ls -al > total 0 > drwxr-xr-x 2 root root 140 Sep 23 09:39 . > drwxr-xr-x 3 root root 60 Sep 23 09:39 .. > crw-rw---- 1 root video 212, 6 Sep 23 09:39 ca0 > crw-rw---- 1 root video 212, 4 Sep 23 09:39 demux0 > crw-rw---- 1 root video 212, 5 Sep 23 09:39 dvr0 > crw-rw---- 1 root video 212, 3 Sep 23 09:39 frontend0 > crw-rw---- 1 root video 212, 7 Sep 23 09:39 net0 > jaap@server /dev/dvb/adapter0 $ > > jaap@server /dev/dvb/adapter0 $ cat /proc/interrupts | grep saa > 21: 711348 IO-APIC-fasteoi sata_sil, saa7146 (0) > jaap@server /dev/dvb/adapter0 $ > > [and counting up (and not because of the sata_sil...) ...] > > I've got SkystarHD+CI Slot+Aston 2.18 and it works OK (for decoding some channels like HBO/MINIMINI I must wait very long time, but it works) -- Pozdrawiam! Gasiu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
