В сообщении от 17 September 2008 00:37:59 Igor M. Liplianin написал(а):
> Hi Steve,
>
> Send you patch for Silicon Laboratories si2109/2110 demodulator support.
>
> https://www.silabs.com/products/audiovideo/satellitestb/Pages/default.aspx
>
> It is S2API compliant, as of september, 16-th
>
> Igor
Add support for USB card modification with si2109/2110 demodulator.
It is DvbWorld 2102 and TeVii s600 modification with Serit tuner.
Igor
# HG changeset patch
# User Igor M. Liplianin <liplianin@xxxxx>
# Date 1221689959 -10800
# Node ID c34ef754e8e02a557b444f3a891d0293e12c2cf3
# Parent 4784f1dc5ad010b2a4c3938e1f732f9b40cca626
Add support for USB card modification with SI2109/2110 demodulator.
From: Igor M. Liplianin <liplianin@xxxxx>
Add support for USB card modification with SI2109/2110 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@xxxxx>
diff -r 4784f1dc5ad0 -r c34ef754e8e0 linux/drivers/media/dvb/dvb-usb/dw2102.c
--- a/linux/drivers/media/dvb/dvb-usb/dw2102.c Tue Sep 16 23:02:20 2008 +0300
+++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c Thu Sep 18 01:19:19 2008 +0300
@@ -11,6 +11,7 @@
*/
#include <linux/version.h>
#include "dw2102.h"
+#include "si21xx.h"
#include "stv0299.h"
#include "z0194a.h"
#include "cx24116.h"
@@ -23,8 +24,8 @@
#define USB_PID_DW2104 0x2104
#endif
-#define DW2102_READ_MSG 0
-#define DW2102_WRITE_MSG 1
+#define DW210X_READ_MSG 0
+#define DW210X_WRITE_MSG 1
#define REG_1F_SYMBOLRATE_BYTE0 0x1f
#define REG_20_SYMBOLRATE_BYTE1 0x20
@@ -33,10 +34,10 @@
#define DW2102_VOLTAGE_CTRL (0x1800)
#define DW2102_RC_QUERY (0x1a00)
-struct dw2102_state {
+struct dw210x_state {
u32 last_key_pressed;
};
-struct dw2102_rc_keys {
+struct dw210x_rc_keys {
u32 keycode;
u32 event;
};
@@ -48,28 +49,27 @@
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
+static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
u16 index, u8 * data, u16 len, int flags)
{
int ret;
u8 u8buf[len];
- unsigned int pipe = (flags == DW2102_READ_MSG) ?
+ unsigned int pipe = (flags == DW210X_READ_MSG) ?
usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
- u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+ u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
- if (flags == DW2102_WRITE_MSG)
+ if (flags == DW210X_WRITE_MSG)
memcpy(u8buf, data, len);
ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
value, index , u8buf, len, 2000);
- if (flags == DW2102_READ_MSG)
+ if (flags == DW210X_READ_MSG)
memcpy(data, u8buf, len);
return ret;
}
/* I2C */
-
static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
@@ -89,10 +89,9 @@
value = msg[0].buf[0];/* register */
for (i = 0; i < msg[1].len; i++) {
value = value + i;
- ret = dw2102_op_rw(d->udev, 0xb5, value, 0,
- buf6, 2, DW2102_READ_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb5, value, 0,
+ buf6, 2, DW210X_READ_MSG);
msg[1].buf[i] = buf6[0];
-
}
break;
case 1:
@@ -102,8 +101,8 @@
buf6[0] = 0x2a;
buf6[1] = msg[0].buf[0];
buf6[2] = msg[0].buf[1];
- ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
- buf6, 3, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+ buf6, 3, DW210X_WRITE_MSG);
break;
case 0x60:
if (msg[0].flags == 0) {
@@ -115,29 +114,85 @@
buf6[4] = msg[0].buf[1];
buf6[5] = msg[0].buf[2];
buf6[6] = msg[0].buf[3];
- ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
- buf6, 7, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+ buf6, 7, DW210X_WRITE_MSG);
} else {
/* read from tuner */
- ret = dw2102_op_rw(d->udev, 0xb5, 0,0,
- buf6, 1, DW2102_READ_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb5, 0, 0,
+ buf6, 1, DW210X_READ_MSG);
msg[0].buf[0] = buf6[0];
}
break;
case (DW2102_RC_QUERY):
- ret = dw2102_op_rw(d->udev, 0xb8, 0, 0,
- buf6, 2, DW2102_READ_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+ buf6, 2, DW210X_READ_MSG);
msg[0].buf[0] = buf6[0];
msg[0].buf[1] = buf6[1];
break;
case (DW2102_VOLTAGE_CTRL):
buf6[0] = 0x30;
buf6[1] = msg[0].buf[0];
- ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
- buf6, 2, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+ buf6, 2, DW210X_WRITE_MSG);
break;
}
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return num;
+}
+
+static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int ret = 0;
+ u8 buf6[] = {0, 0, 0, 0, 0, 0, 0};
+
+ if (!d)
+ return -ENODEV;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ switch (num) {
+ case 2:
+ /* read si2109 register by number */
+ buf6[0] = 0xd0;
+ buf6[1] = msg[0].len;
+ buf6[2] = msg[0].buf[0];
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ buf6, msg[0].len + 2, DW210X_WRITE_MSG);
+ /* read si2109 register */
+ ret = dw210x_op_rw(d->udev, 0xc3, 0xd0, 0,
+ buf6, msg[1].len + 2, DW210X_READ_MSG);
+ memcpy(msg[1].buf, buf6 + 2, msg[1].len);
+
+ break;
+ case 1:
+ switch (msg[0].addr) {
+ case 0x68:
+ /* write to si2109 register */
+ buf6[0] = 0xd0;
+ buf6[1] = msg[0].len;
+ memcpy(buf6 + 2, msg[0].buf, msg[0].len);
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6,
+ msg[0].len + 2, DW210X_WRITE_MSG);
+ break;
+ case(DW2102_RC_QUERY):
+ ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+ buf6, 2, DW210X_READ_MSG);
+ msg[0].buf[0] = buf6[0];
+ msg[0].buf[1] = buf6[1];
+ break;
+ case(DW2102_VOLTAGE_CTRL):
+ buf6[0] = 0x30;
+ buf6[1] = msg[0].buf[0];
+ ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+ buf6, 2, DW210X_WRITE_MSG);
+ break;
+ }
break;
}
@@ -164,11 +219,11 @@
obuf[0] = 0xaa;
obuf[1] = msg[0].len;
obuf[2] = msg[0].buf[0];
- ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
- obuf, msg[0].len + 2, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ obuf, msg[0].len + 2, DW210X_WRITE_MSG);
/* second read registers */
- ret = dw2102_op_rw(d->udev, 0xc3, 0xab , 0,
- ibuf, msg[1].len + 2, DW2102_READ_MSG);
+ ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0,
+ ibuf, msg[1].len + 2, DW210X_READ_MSG);
memcpy(msg[1].buf, ibuf + 2, msg[1].len);
break;
@@ -187,8 +242,8 @@
i = 1;
do {
memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len));
- ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
- obuf, (len > 16 ? 16 : len) + 3, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG);
i += 16;
len -= 16;
} while (len > 0);
@@ -198,15 +253,15 @@
obuf[0] = 0xaa;
obuf[1] = msg[0].len;
memcpy(obuf + 2, msg[0].buf, msg[0].len);
- ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
- obuf, msg[0].len + 2, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+ obuf, msg[0].len + 2, DW210X_WRITE_MSG);
}
break;
}
case(DW2102_RC_QUERY): {
u8 ibuf[2];
- ret = dw2102_op_rw(d->udev, 0xb8, 0, 0,
- ibuf, 2, DW2102_READ_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+ ibuf, 2, DW210X_READ_MSG);
memcpy(msg[0].buf, ibuf , 2);
break;
}
@@ -214,8 +269,8 @@
u8 obuf[2];
obuf[0] = 0x30;
obuf[1] = msg[0].buf[0];
- ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
- obuf, 2, DW2102_WRITE_MSG);
+ ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+ obuf, 2, DW210X_WRITE_MSG);
break;
}
}
@@ -227,29 +282,34 @@
return num;
}
-static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
+static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm dw2102_i2c_algo = {
.master_xfer = dw2102_i2c_transfer,
- .functionality = dw2102_i2c_func,
+ .functionality = dw210x_i2c_func,
+};
+
+static struct i2c_algorithm dw2102_serit_i2c_algo = {
+ .master_xfer = dw2102_serit_i2c_transfer,
+ .functionality = dw210x_i2c_func,
};
static struct i2c_algorithm dw2104_i2c_algo = {
.master_xfer = dw2104_i2c_transfer,
- .functionality = dw2102_i2c_func,
+ .functionality = dw210x_i2c_func,
};
-static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
{
int i;
u8 ibuf[] = {0, 0};
u8 eeprom[256], eepromline[16];
for (i = 0; i < 256; i++) {
- if (dw2102_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW2102_READ_MSG) < 0) {
+ if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) {
err("read eeprom failed.");
return -1;
} else {
@@ -265,7 +325,7 @@
return 0;
};
-static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
static u8 command_13v[1] = {0x00};
static u8 command_18v[1] = {0x01};
@@ -287,25 +347,46 @@
.mpg_clk_pos_pol = 0x01,
};
+static struct si21xx_config serit_sp1511lhb_config = {
+ .demod_address = 0x68,
+ .min_delay_ms = 100,
+
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
&d->dev->i2c_adap)) != NULL) {
- d->fe->ops.set_voltage = dw2102_set_voltage;
+ d->fe->ops.set_voltage = dw210x_set_voltage;
info("Attached cx24116!\n");
return 0;
}
return -EIO;
}
+static struct dvb_usb_device_properties dw2102_properties;
+
static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
{
- d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
- &d->dev->i2c_adap);
- if (d->fe != NULL) {
- d->fe->ops.set_voltage = dw2102_set_voltage;
- info("Attached stv0299!\n");
- return 0;
+ if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) {
+ /*dw2102_properties.adapter->tuner_attach = NULL;*/
+ d->fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached si21xx!\n");
+ return 0;
+ }
+ }
+ if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) {
+ /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
+ d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
+ &d->dev->i2c_adap);
+ if (d->fe != NULL) {
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+ info("Attached stv0299!\n");
+ return 0;
+ }
}
return -EIO;
}
@@ -317,7 +398,7 @@
return 0;
}
-static struct dvb_usb_rc_key dw2102_rc_keys[] = {
+static struct dvb_usb_rc_key dw210x_rc_keys[] = {
{ 0xf8, 0x0a, KEY_Q }, /*power*/
{ 0xf8, 0x0c, KEY_M }, /*mute*/
{ 0xf8, 0x11, KEY_1 },
@@ -356,7 +437,7 @@
static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
- struct dw2102_state *st = d->priv;
+ struct dw210x_state *st = d->priv;
u8 key[2];
struct i2c_msg msg[] = {
{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
@@ -366,12 +447,12 @@
*state = REMOTE_NO_KEY_PRESSED;
if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
- for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
- if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
+ for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) {
+ if (dw210x_rc_keys[i].data == msg[0].buf[0]) {
*state = REMOTE_KEY_PRESSED;
- *event = dw2102_rc_keys[i].event;
+ *event = dw210x_rc_keys[i].event;
st->last_key_pressed =
- dw2102_rc_keys[i].event;
+ dw210x_rc_keys[i].event;
break;
}
st->last_key_pressed = 0;
@@ -418,15 +499,15 @@
p = kmalloc(fw->size, GFP_KERNEL);
reset = 1;
/*stop the CPU*/
- dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW2102_WRITE_MSG);
- dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW2102_WRITE_MSG);
+ dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG);
+ dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG);
if (p != NULL) {
memcpy(p, fw->data, fw->size);
for (i = 0; i < fw->size; i += 0x40) {
b = (u8 *) p + i;
- if (dw2102_op_rw(dev, 0xa0, i, 0, b , 0x40,
- DW2102_WRITE_MSG) != 0x40) {
+ if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40,
+ DW210X_WRITE_MSG) != 0x40) {
err("error while transferring firmware");
ret = -EINVAL;
break;
@@ -434,13 +515,13 @@
}
/* restart the CPU */
reset = 0;
- if (ret || dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1,
- DW2102_WRITE_MSG) != 1) {
+ if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1,
+ DW210X_WRITE_MSG) != 1) {
err("could not restart the USB controller CPU.");
ret = -EINVAL;
}
- if (ret || dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1,
- DW2102_WRITE_MSG) != 1) {
+ if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1,
+ DW210X_WRITE_MSG) != 1) {
err("could not restart the USB controller CPU.");
ret = -EINVAL;
}
@@ -449,27 +530,32 @@
case USB_PID_DW2104:
case 0xd650:
reset = 1;
- dw2102_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
- DW2102_WRITE_MSG);
+ dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
+ DW210X_WRITE_MSG);
reset = 0;
- dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
- DW2102_WRITE_MSG);
+ dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
+ DW210X_WRITE_MSG);
break;
case USB_PID_DW2102:
- dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
- DW2102_WRITE_MSG);
- dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
- DW2102_READ_MSG);
+ dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
+ DW210X_WRITE_MSG);
+ dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
+ DW210X_READ_MSG);
+ /* check STV0299 frontend */
+ dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2,
+ DW210X_READ_MSG);
+ if (reset16[0] == 0xa1)
+ dw2102_properties.i2c_algo = &dw2102_i2c_algo;
break;
case 0x2101:
- dw2102_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
- DW2102_READ_MSG);
- dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
- DW2102_READ_MSG);
- dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
- DW2102_READ_MSG);
- dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
- DW2102_READ_MSG);
+ dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
+ DW210X_READ_MSG);
+ dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
+ DW210X_READ_MSG);
+ dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
+ DW210X_READ_MSG);
+ dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
+ DW210X_READ_MSG);
break;
}
msleep(100);
@@ -482,12 +568,12 @@
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-dw2102.fw",
- .size_of_priv = sizeof(struct dw2102_state),
+ .size_of_priv = sizeof(struct dw210x_state),
.no_reconnect = 1,
- .i2c_algo = &dw2102_i2c_algo,
- .rc_key_map = dw2102_rc_keys,
- .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+ .i2c_algo = &dw2102_serit_i2c_algo,
+ .rc_key_map = dw210x_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys),
.rc_interval = 150,
.rc_query = dw2102_rc_query,
@@ -495,7 +581,7 @@
/* parameter for the MPEG2-data transfer */
.num_adapters = 1,
.download_firmware = dw2102_load_firmware,
- .read_mac_address = dw2102_read_mac_address,
+ .read_mac_address = dw210x_read_mac_address,
.adapter = {
{
.frontend_attach = dw2102_frontend_attach,
@@ -530,12 +616,12 @@
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-dw2104.fw",
- .size_of_priv = sizeof(struct dw2102_state),
+ .size_of_priv = sizeof(struct dw210x_state),
.no_reconnect = 1,
.i2c_algo = &dw2104_i2c_algo,
- .rc_key_map = dw2102_rc_keys,
- .rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
+ .rc_key_map = dw210x_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys),
.rc_interval = 150,
.rc_query = dw2102_rc_query,
@@ -543,7 +629,7 @@
/* parameter for the MPEG2-data transfer */
.num_adapters = 1,
.download_firmware = dw2102_load_firmware,
- .read_mac_address = dw2102_read_mac_address,
+ .read_mac_address = dw210x_read_mac_address,
.adapter = {
{
.frontend_attach = dw2104_frontend_attach,
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
