Hi,
I am just wondering if anybody succeeded to make a LeadTek PxPVR2200 work...
It's using Conexant CX23885+CX23417 + Xceive silicon tuner.
The card is mostly sold in Eastern Europe but it is only coming with Windows
drivers and v4l does not recognize it:
========================
cx23885 driver version 0.0.1 loaded
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18
cx23885[0]: Your board isn't known (yet) to the driver. You can
cx23885[0]: try to pick one of the existing card configs via
cx23885[0]: card=<n> insmod option. Updating to the latest
cx23885[0]: version might help as well.
cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
cx23885[0]: card=0 -> UNKNOWN/GENERIC
cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
CORE cx23885[0]: subsystem: 107d:6f21, board: UNKNOWN/GENERIC
[card=0,autodetected]
cx23885[0]: i2c bus 0 registered
tuner' 2-0061: chip found @ 0xc2 (cx23885[0])
cx23885[0]: i2c bus 1 registered
tvaudio' 3-004c: tea6420 found @ 0x98 (cx23885[0])
cx23885[0]: i2c bus 2 registered
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:07:00.0, rev: 2, irq: 18, latency: 0, mmio:
0xfe800000
PCI: Setting latency timer of device 0000:07:00.0 to 64
========================
No video device is created for this card therefore it's totally unusable
under Linux.
I played with the card by changing <card> option but none of them worked. I
used the latest mercurial drivers but it did not help.
lspci -vvv returns this:
========================
07:00.0 Multimedia video controller: Conexant Unknown device 8852 (rev 02)
Subsystem: LeadTek Research Inc. Unknown device 6f21
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: cx23885
Kernel modules: cx23885
========================
Many thanks for any suggestion,
aegyssus
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
