Hi,
support for this device has progressed. However it is at the stage
now where I am not seeing error messages but it is still not working.
The code is based on a working patch so I am pretty confident that the
gpio settings and other addresses are correct. Could someone have a look
and see if something leaps out at them? This would be much appreciated.
The dmesg is from the response to a scan using a single scan line.
Cheers Paul
--- cx88-cards.c.prepatch 2008-09-06 11:54:19.000000000 +1000
+++ cx88-cards.c 2008-09-07 15:50:47.000000000 +1000
@@ -1611,6 +1611,37 @@
} },
.mpeg = CX88_MPEG_DVB,
},
+ [CX88_BOARD_WINFAST_DTV1800H] = {
+ .name = "LeadTek Winfast DTV1800 Hybrid",
+ .tuner_type = TUNER_XC2028,
+// .radio_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+// .radio_addr = 0x61,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0400, //pin 2:mute = 0 (off)
+ .gpio1 = 0x6040, //pin 13:audio = 0
(tuner), pin 14:FM = 1 (off?)
+ .gpio2 = 0x0000,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0400, //pin 2:mute = 0 (off)
+ .gpio1 = 0x6060, //pin 13:audio = 1
(line), pin 14:FM = 1 (off?)
+ .gpio2 = 0x0000,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ }},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x0400, //pin 2:mute = 0 (off)
+ .gpio1 = 0x6000, //pin 13:audio = 0?
(tuner), pin 14:FM = 0? (on?)
+ .gpio2 = 0x0000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+
};
/* ------------------------------------------------------------------ */
@@ -1948,6 +1979,11 @@
.subvendor = 0x14f1,
.subdevice = 0x8852,
.card = CX88_BOARD_GENIATECH_X8000_MT,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6654,
+ .card = CX88_BOARD_WINFAST_DTV1800H,
+
}
};
@@ -2182,7 +2218,6 @@
{
struct i2c_algo_bit_data *i2c_algo = priv;
struct cx88_core *core = i2c_algo->data;
-
/* Board-specific callbacks */
switch (core->boardnr) {
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
@@ -2192,7 +2227,6 @@
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
return cx88_dvico_xc2028_callback(priv, command, arg);
}
-
switch (command) {
case XC2028_TUNER_RESET:
{
@@ -2221,7 +2255,7 @@
mdelay(250);
return 0;
}
- }
+ }
}
return -EINVAL;
}
@@ -2310,6 +2344,18 @@
cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
udelay(1000);
break;
+ case CX88_BOARD_WINFAST_DTV1800H:
+// cx_set(MO_GP1_IO, 0x000010); //gpio 12 = 1: powerup
XC3028
+cx_write(MO_GP1_IO,0x101010);
+ mdelay(250);
+// cx_clear(MO_GP1_IO, 0x000010); //gpio 12 = 0:
powerdown XC3028
+cx_write(MO_GP1_IO,0x101000);
+ mdelay(250);
+// cx_set(MO_GP1_IO, 0x000010); //gpio 12 = 1: powerup
XC3028
+cx_write(MO_GP1_IO,0x101010);
+ mdelay(250);
+ break;
+
}
}
--- cx88-dvb.c.prepatch 2008-09-06 11:54:19.000000000 +1000
+++ cx88-dvb.c 2008-09-07 15:50:41.000000000 +1000
@@ -391,10 +391,18 @@
msleep(100);
cx_set(MO_GP0_IO, 0x00000010);
msleep(100);
- break;
- }
-
- break;
+ break;
+ case CX88_BOARD_WINFAST_DTV1800H:
+ printk(KERN_INFO "setting GPIO to TV!\n");
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(250);
+ cx_write(MO_GP1_IO, 0x101000);
+ mdelay(250);
+ cx_write(MO_GP1_IO, 0x101010);
+ mdelay(250);
+ return 0;
+ break;
+ }
case XC2028_RESET_CLK:
dprintk(1, "%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg);
break;
@@ -459,6 +467,11 @@
#endif
};
+static struct zl10353_config cx88_dtv1800h = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
@@ -773,6 +786,31 @@
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX88_BOARD_WINFAST_DTV1800H:
+ dev->dvb.frontend = dvb_attach(zl10353_attach,
+ &cx88_dtv1800h,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->core->i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = dev->core,
+ .callback = cx88_xc3028_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ };
+
+ fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ dev->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+ dev->dvb.frontend->ops.sleep = NULL;
+ break;
+
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
--- cx88.h.prepatch 2008-09-06 11:54:19.000000000 +1000
+++ cx88.h 2008-09-06 15:13:25.000000000 +1000
@@ -220,6 +220,7 @@
#define CX88_BOARD_POWERCOLOR_REAL_ANGEL 62
#define CX88_BOARD_GENIATECH_X8000_MT 63
#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO 64
+#define CX88_BOARD_WINFAST_DTV1800H 65
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
[ 29.956665] Linux video capture interface: v2.00
[ 30.276215] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 30.276311] cx88[0]: subsystem: 107d:6654, board: LeadTek Winfast
DTV1800 Hybrid [card=65,autodetected]
[ 30.276314] cx88[0]: TV tuner type 71, Radio tuner type 0
[ 30.324181] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 30.364246] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 31.461127] parport_pc 00:06: reported by Plug and Play ACPI
[ 31.461249] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 32.348865] cx88[0]: i2c register ok
[ 32.389079] cx88[0]/2: cx2388x 8802 Driver Manager
[ 32.389440] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 32.389450] ACPI: PCI Interrupt 0000:04:09.2[A] -> Link [LNKB] -> GSI
19 (level, low) -> IRQ 20
[ 32.389459] cx88[0]/2: found at 0000:04:09.2, rev: 5, irq: 20,
latency: 64, mmio: 0xf9000000
[ 32.389509] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKB] -> GSI
19 (level, low) -> IRQ 20
[ 32.389522] cx88[0]/0: found at 0000:04:09.0, rev: 5, irq: 20,
latency: 64, mmio: 0xf7000000
[ 32.553715] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 32.553720] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 32.553724] cx88[0]/2: subsystem: 107d:6654, board: LeadTek Winfast
DTV1800 Hybrid [card=65]
[ 32.553727] cx88[0]/2-dvb: cx8802_dvb_probe
[ 32.553729] cx88[0]/2-dvb: ->being probed by Card=65 Name=cx88[0],
PCI 04:09
[ 32.553731] cx88[0]/2: cx2388x based DVB/ATSC card
[ 32.654884] xc2028: Xcv2028/3028 init called!
[ 32.654889] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 32.654891] xc2028 2-0061: xc2028_set_config called
[ 32.654895] DVB: registering new adapter (cx88[0])
[ 32.654897] dvb_register_frontend
[ 32.654900] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[ 32.687199] tuner' 2-0061: Setting mode_mask to 0x0e
[ 32.687203] tuner' 2-0061: chip found @ 0xc2 (cx88[0])
[ 32.687205] tuner' 2-0061: tuner 0x61: Tuner type absent
[ 32.687224] cx88[0]: tuner' i2c attach [addr=0x61,client=(tuner unset)]
[ 32.687227] tuner' 2-0061: Calling set_type_addr for type=71,
addr=0x61, mode=0x04, config=0x00
[ 32.687229] tuner' 2-0061: set addr for type -1
[ 32.687231] tuner' 2-0061: defining GPIO callback
[ 32.687234] xc2028: Xcv2028/3028 init called!
[ 32.687236] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 32.687239] tuner' 2-0061: type set to Xceive XC3028
[ 32.687241] tuner' 2-0061: tv freq set to 400.00
[ 32.687243] xc2028 2-0061: xc2028_set_analog_freq called
[ 32.687246] xc2028 2-0061: generic_set_freq called
[ 32.687247] xc2028 2-0061: should set frequency 400000 kHz
[ 32.687249] xc2028 2-0061: check_firmware called
[ 32.687251] xc2028 2-0061: xc2028/3028 firmware name not set!
[ 32.687254] tuner' 2-0061: cx88[0] tuner' I2C addr 0xc2 with type 71
used for 0x0e
[ 32.696728] cx88[0]/0: registered device video0 [v4l2]
[ 32.696745] cx88[0]/0: registered device vbi0
[ 32.696765] cx88[0]/0: registered device radio0
[ 32.696824] tuner' 2-0061: switching to v4l2
[ 32.696827] tuner' 2-0061: tv freq set to 400.00
[ 32.696830] xc2028 2-0061: xc2028_set_analog_freq called
[ 32.696833] xc2028 2-0061: generic_set_freq called
[ 32.696835] xc2028 2-0061: should set frequency 400000 kHz
[ 32.696837] xc2028 2-0061: check_firmware called
[ 32.696838] xc2028 2-0061: xc2028/3028 firmware name not set!
[ 32.699882] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 32.699888] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI
23 (level, low) -> IRQ 16
[ 32.699909] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 34.018829] NET: Registered protocol family 10
[ 34.019070] lo: Disabled Privacy Extensions
[ 34.019570] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.655590] lp0: using parport0 (interrupt-driven).
[ 34.824967] Adding 1317288k swap on /dev/sda5. Priority:-1 extents:1
across:1317288k
[ 35.483892] EXT3 FS on sda1, internal journal
[ 37.921646] No dock devices found.
[ 38.366665] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+
processors (1 cpu cores) (version 2.20.00)
[ 38.366699] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 38.366701] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
[ 38.366704] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 41.090309] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 41.090316] apm: overridden by ACPI.
[ 91.552043] Marking TSC unstable due to: cpufreq changes.
[ 91.561971] Time: acpi_pm clocksource has been installed.
[ 91.847487] tuner' 2-0061: Cmd TUNER_SET_STANDBY accepted for analog TV
[ 91.847497] xc2028 2-0061: xc2028_sleep called
[ 91.956780] Clocksource tsc unstable (delta = -202508653 ns)
[ 92.093595] dvb_frontend_open
[ 92.093606] cx88[0]/2-dvb: cx8802_dvb_advise_acquire
[ 92.093610] dvb_frontend_start
[ 92.105319] dvb_frontend_ioctl
[ 92.105330] dvb_frontend_thread
[ 92.105334] DVB: initialising frontend 0 (Zarlink ZL10353 DVB-T)...
[ 92.107883] dvb_frontend_release
[ 92.107890] cx88[0]/2-dvb: cx8802_dvb_advise_release
[ 92.107949] dvb_frontend_open
[ 92.107952] cx88[0]/2-dvb: cx8802_dvb_advise_acquire
[ 92.107956] dvb_frontend_start
[ 92.107960] dvb_frontend_ioctl
[ 92.107966] dvb_frontend_release
[ 92.107969] cx88[0]/2-dvb: cx8802_dvb_advise_release
[ 92.108029] dvb_frontend_open
[ 92.108032] cx88[0]/2-dvb: cx8802_dvb_advise_acquire
[ 92.108035] dvb_frontend_start
[ 92.108039] dvb_frontend_ioctl
[ 93.528877] tuner' 2-0061: Cmd AUDC_SET_RADIO accepted for radio
[ 93.528888] tuner' 2-0061: radio freq set to 87.50
[ 93.528893] xc2028 2-0061: xc2028_set_analog_freq called
[ 93.528898] xc2028 2-0061: generic_set_freq called
[ 93.528902] xc2028 2-0061: should set frequency 87500 kHz
[ 93.528905] xc2028 2-0061: check_firmware called
[ 93.528909] xc2028 2-0061: xc2028/3028 firmware name not set!
[ 93.544429] tuner' 2-0061: Cmd TUNER_SET_STANDBY accepted for radio
[ 93.544438] xc2028 2-0061: xc2028_sleep called
[ 93.545436] xc2028 2-0061: Error on line 1075: -121
[ 61.910344] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=346 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=326
[ 62.043777] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=346 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=326
[ 62.043932] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=355 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=335
[ 62.192098] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=355 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=335
[ 62.192229] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=402 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=382
[ 62.403580] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=402 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=382
[ 62.403729] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=412 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=392
[ 62.509589] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=325
[ 62.727394] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=334
[ 63.031197] Inbound IN=eth0 OUT= MAC= SRC=192.168.3.17
DST=239.255.255.250 LEN=411 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP
SPT=1900 DPT=1900 LEN=391
[ 162.664155] dvb_frontend_release
[ 162.664166] cx88[0]/2-dvb: cx8802_dvb_advise_release
[ 164.538048] xc2028 2-0061: xc2028_sleep called
[ 164.539220] xc2028 2-0061: Error on line 1075: -121
[ 166.924301] dvb_frontend_open
[ 166.924312] cx88[0]/2-dvb: cx8802_dvb_advise_acquire
[ 166.924316] dvb_frontend_start
[ 166.925247] dvb_frontend_ioctl
[ 166.925255] dvb_frontend_thread
[ 166.925258] DVB: initialising frontend 0 (Zarlink ZL10353 DVB-T)...
[ 166.948442] dvb_frontend_ioctl
[ 166.948456] dvb_frontend_add_event
[ 166.948478] dvb_frontend_swzigzag_autotune: drift:0 inversion:0
auto_step:0 auto_sub_step:0 started_auto_step:0
[ 166.951013] zl10353: zl10353_calc_nominal_rate: bw 7, adc_clock
450560 => 0x5ae9
[ 166.951621] zl10353: zl10353_calc_input_freq: if2 361667, ife 88893,
adc_clock 450560 => -12930 / 0xcd7e
[ 166.952833] xc2028 2-0061: xc2028_set_params called
[ 166.952838] xc2028 2-0061: generic_set_freq called
[ 166.952841] xc2028 2-0061: should set frequency 205625 kHz
[ 166.952845] xc2028 2-0061: check_firmware called
[ 166.952849] xc2028 2-0061: load_all_firmwares called
[ 166.952852] xc2028 2-0061: Reading firmware xc3028-v27.fw
[ 167.016500] xc2028 2-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 167.016524] xc2028 2-0061: Reading firmware type BASE F8MHZ (3), id
0, size=8718.
[ 167.016548] xc2028 2-0061: Reading firmware type BASE F8MHZ MTS (7),
id 0, size=8712.
[ 167.016573] xc2028 2-0061: Reading firmware type BASE FM (401), id 0,
size=8562.
[ 167.016596] xc2028 2-0061: Reading firmware type BASE FM INPUT1
(c01), id 0, size=8576.
[ 167.016619] xc2028 2-0061: Reading firmware type BASE (1), id 0,
size=8706.
[ 167.016640] xc2028 2-0061: Reading firmware type BASE MTS (5), id 0,
size=8682.
[ 167.016652] xc2028 2-0061: Reading firmware type (0), id 100000007,
size=161.
[ 167.016658] xc2028 2-0061: Reading firmware type MTS (4), id
100000007, size=169.
[ 167.016665] xc2028 2-0061: Reading firmware type (0), id 200000007,
size=161.
[ 167.016671] xc2028 2-0061: Reading firmware type MTS (4), id
200000007, size=169.
[ 167.016677] xc2028 2-0061: Reading firmware type (0), id 400000007,
size=161.
[ 167.016683] xc2028 2-0061: Reading firmware type MTS (4), id
400000007, size=169.
[ 167.016689] xc2028 2-0061: Reading firmware type (0), id 800000007,
size=161.
[ 167.016695] xc2028 2-0061: Reading firmware type MTS (4), id
800000007, size=169.
[ 167.016701] xc2028 2-0061: Reading firmware type (0), id 3000000e0,
size=161.
[ 167.016706] xc2028 2-0061: Reading firmware type MTS (4), id
3000000e0, size=169.
[ 167.016712] xc2028 2-0061: Reading firmware type (0), id c000000e0,
size=161.
[ 167.016718] xc2028 2-0061: Reading firmware type MTS (4), id
c000000e0, size=169.
[ 167.016724] xc2028 2-0061: Reading firmware type (0), id 200000,
size=161.
[ 167.016729] xc2028 2-0061: Reading firmware type MTS (4), id 200000,
size=169.
[ 167.016735] xc2028 2-0061: Reading firmware type (0), id 4000000,
size=161.
[ 167.016741] xc2028 2-0061: Reading firmware type MTS (4), id 4000000,
size=169.
[ 167.016747] xc2028 2-0061: Reading firmware type D2633 DTV6 ATSC
(10030), id 0, size=149.
[ 167.016754] xc2028 2-0061: Reading firmware type D2620 DTV6 QAM (68),
id 0, size=149.
[ 167.016761] xc2028 2-0061: Reading firmware type D2633 DTV6 QAM (70),
id 0, size=149.
[ 167.016767] xc2028 2-0061: Reading firmware type D2620 DTV7 (88), id
0, size=149.
[ 167.016774] xc2028 2-0061: Reading firmware type D2633 DTV7 (90), id
0, size=149.
[ 167.016780] xc2028 2-0061: Reading firmware type D2620 DTV78 (108),
id 0, size=149.
[ 167.016786] xc2028 2-0061: Reading firmware type D2633 DTV78 (110),
id 0, size=149.
[ 167.016792] xc2028 2-0061: Reading firmware type D2620 DTV8 (208), id
0, size=149.
[ 167.016798] xc2028 2-0061: Reading firmware type D2633 DTV8 (210), id
0, size=149.
[ 167.016804] xc2028 2-0061: Reading firmware type FM (400), id 0,
size=135.
[ 167.016810] xc2028 2-0061: Reading firmware type (0), id 10, size=161.
[ 167.016816] xc2028 2-0061: Reading firmware type MTS (4), id 10,
size=169.
[ 167.016822] xc2028 2-0061: Reading firmware type (0), id 1000400000,
size=169.
[ 167.016828] xc2028 2-0061: Reading firmware type (0), id c00400000,
size=161.
[ 167.016833] xc2028 2-0061: Reading firmware type (0), id 800000,
size=161.
[ 167.016839] xc2028 2-0061: Reading firmware type (0), id 8000, size=161.
[ 167.016844] xc2028 2-0061: Reading firmware type LCD (1000), id 8000,
size=161.
[ 167.016850] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
8000, size=161.
[ 167.016857] xc2028 2-0061: Reading firmware type MTS (4), id 8000,
size=169.
[ 167.016863] xc2028 2-0061: Reading firmware type (0), id b700, size=161.
[ 167.016869] xc2028 2-0061: Reading firmware type LCD (1000), id b700,
size=161.
[ 167.016875] xc2028 2-0061: Reading firmware type LCD NOGD (3000), id
b700, size=161.
[ 167.016881] xc2028 2-0061: Reading firmware type (0), id 2000, size=161.
[ 167.016887] xc2028 2-0061: Reading firmware type MTS (4), id b700,
size=169.
[ 167.016893] xc2028 2-0061: Reading firmware type MTS LCD (1004), id
b700, size=169.
[ 167.016899] xc2028 2-0061: Reading firmware type MTS LCD NOGD (3004),
id b700, size=169.
[ 167.016906] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3280
(60000000), id 0, size=192.
[ 167.016913] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3300
(60000000), id 0, size=192.
[ 167.016920] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3440
(60000000), id 0, size=192.
[ 167.016927] xc2028 2-0061: Reading firmware type SCODE HAS_IF_3460
(60000000), id 0, size=192.
[ 167.016934] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN36
SCODE HAS_IF_3800 (60210020), id 0, size=192.
[ 167.016943] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4000
(60000000), id 0, size=192.
[ 167.016949] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA388
SCODE HAS_IF_4080 (60410020), id 0, size=192.
[ 167.016958] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4200
(60000000), id 0, size=192.
[ 167.016987] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_4320 (60008000), id 8000, size=192.
[ 167.016995] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4450
(60000000), id 0, size=192.
[ 167.017002] xc2028 2-0061: Reading firmware type MTS LCD NOGD MONO IF
SCODE HAS_IF_4500 (6002b004), id b700, size=192.
[ 167.017012] xc2028 2-0061: Reading firmware type LCD NOGD IF SCODE
HAS_IF_4600 (60023000), id 8000, size=192.
[ 167.017020] xc2028 2-0061: Reading firmware type DTV6 QAM DTV7 DTV78
DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0, size=192.
[ 167.017030] xc2028 2-0061: Reading firmware type SCODE HAS_IF_4940
(60000000), id 0, size=192.
[ 167.017037] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5260
(60000000), id 0, size=192.
[ 167.017044] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_5320 (60008000), id f00000007, size=192.
[ 167.017051] xc2028 2-0061: Reading firmware type DTV7 DTV78 DTV8
DIBCOM52 CHINA SCODE HAS_IF_5400 (65000380), id 0, size=192.
[ 167.017061] xc2028 2-0061: Reading firmware type DTV6 ATSC OREN538
SCODE HAS_IF_5580 (60110020), id 0, size=192.
[ 167.017069] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5640
(60000000), id 300000007, size=192.
[ 167.017076] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5740
(60000000), id c00000007, size=192.
[ 167.017084] xc2028 2-0061: Reading firmware type SCODE HAS_IF_5900
(60000000), id 0, size=192.
[ 167.017091] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6000 (60008000), id c04c000f0, size=192.
[ 167.017099] xc2028 2-0061: Reading firmware type DTV6 QAM ATSC LG60
F6MHZ SCODE HAS_IF_6200 (68050060), id 0, size=192.
[ 167.017108] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6240
(60000000), id 10, size=192.
[ 167.017115] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6320 (60008000), id 200000, size=192.
[ 167.017123] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6340
(60000000), id 200000, size=192.
[ 167.017130] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6500 (60008000), id c044000e0, size=192.
[ 167.017138] xc2028 2-0061: Reading firmware type DTV6 ATSC ATI638
SCODE HAS_IF_6580 (60090020), id 0, size=192.
[ 167.017146] xc2028 2-0061: Reading firmware type SCODE HAS_IF_6600
(60000000), id 3000000e0, size=192.
[ 167.017154] xc2028 2-0061: Reading firmware type MONO SCODE
HAS_IF_6680 (60008000), id 3000000e0, size=192.
[ 167.017162] xc2028 2-0061: Reading firmware type DTV6 ATSC TOYOTA794
SCODE HAS_IF_8140 (60810020), id 0, size=192.
[ 167.017171] xc2028 2-0061: Reading firmware type SCODE HAS_IF_8200
(60000000), id 0, size=192.
[ 167.017188] xc2028 2-0061: Firmware files loaded.
[ 167.017192] xc2028 2-0061: checking firmware, user requested
type=F8MHZ D2620 DTV7 (8a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 167.017201] callback: ddb23b80
[ 167.017205] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_TUNER_RESET 0
[ 167.017209] setting GPIO to TV!
[ 167.761794] xc2028 2-0061: load_firmware called
[ 167.761799] xc2028 2-0061: seek_firmware called, want type=BASE F8MHZ
D2620 DTV7 (8b), id 0000000000000000.
[ 167.761807] xc2028 2-0061: Found firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 167.761813] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 167.761819] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_TUNER_RESET 0
[ 167.761822] setting GPIO to TV!
[ 168.512587] dvb_frontend_ioctl
[ 85.009452] five<7>xc2028 2-0061: Load init1 firmware, if exists
[ 85.009461] xc2028 2-0061: load_firmware called
[ 85.009463] xc2028 2-0061: seek_firmware called, want type=BASE INIT1
F8MHZ D2620 DTV7 (408b), id 0000000000000000.
[ 85.009470] xc2028 2-0061: Can't find firmware for type=BASE INIT1
F8MHZ (4003), id 0000000000000000.
[ 85.009473] xc2028 2-0061: load_firmware called
[ 85.009475] xc2028 2-0061: seek_firmware called, want type=BASE INIT1
D2620 DTV7 (4089), id 0000000000000000.
[ 85.009480] xc2028 2-0061: Can't find firmware for type=BASE INIT1
(4001), id 0000000000000000.
[ 85.009482] Skip base<7>xc2028 2-0061: load_firmware called
[ 85.009485] xc2028 2-0061: seek_firmware called, want type=F8MHZ
D2620 DTV7 (8a), id 0000000000000000.
[ 85.009488] xc2028 2-0061: Found firmware for type=D2620 DTV7 (88),
id 0000000000000000.
[ 85.009491] xc2028 2-0061: Loading firmware for type=D2620 DTV7 (88),
id 0000000000000000.
[ 85.023254] xc2028 2-0061: Trying to load scode 0
[ 85.023257] xc2028 2-0061: load_scode called
[ 85.023259] xc2028 2-0061: seek_firmware called, want type=F8MHZ
D2620 DTV7 SCODE (2000008a), id 0000000000000000.
[ 85.023264] xc2028 2-0061: Can't find firmware for type=DTV7 SCODE
(20000080), id 0000000000000000.
[ 85.023267] xc2028 2-0061: xc2028_get_reg 0004 called
[ 85.024461] xc2028 2-0061: xc2028_get_reg 0008 called
[ 85.025211] xc2028 2-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7
[ 85.040489] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_RESET_CLK 1
[ 85.160383] xc2028 2-0061: divisor= 00 00 32 b8 (freq=205.625)
[ 85.362226] dvb_frontend_ioctl
[ 95.136175] dvb_frontend_ioctl
[ 95.337363] dvb_frontend_ioctl
[ 95.538537] dvb_frontend_ioctl
[ 95.733733] dvb_frontend_add_event
[ 95.733918] dvb_frontend_swzigzag_autotune: drift:0 inversion:1
auto_step:0 auto_sub_step:1 started_auto_step:0
[ 95.736624] zl10353: zl10353_calc_nominal_rate: bw 7, adc_clock
450560 => 0x5ae9
[ 95.737385] zl10353: zl10353_calc_input_freq: if2 361667, ife 88893,
adc_clock 450560 => -12930 / 0xcd7e
[ 95.738760] xc2028 2-0061: xc2028_set_params called
[ 95.738763] xc2028 2-0061: generic_set_freq called
[ 95.738986] xc2028 2-0061: should set frequency 205625 kHz
[ 95.738989] xc2028 2-0061: check_firmware called
[ 95.738991] xc2028 2-0061: checking firmware, user requested
type=F8MHZ D2620 DTV7 (8a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 95.738997] xc2028 2-0061: BASE firmware not changed.
[ 95.738999] Skip base<7>xc2028 2-0061: Std-specific firmware already
loaded.
[ 95.739002] xc2028 2-0061: SCODE firmware already loaded.
[ 95.739004] xc2028 2-0061: xc2028_get_reg 0004 called
[ 95.739914] dvb_frontend_ioctl
[ 95.740726] xc2028 2-0061: xc2028_get_reg 0008 called
[ 95.741478] xc2028 2-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7
[ 95.756472] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_RESET_CLK 1
[ 95.876356] xc2028 2-0061: divisor= 00 00 32 b8 (freq=205.625)
[ 96.078261] dvb_frontend_ioctl
[ 96.279441] dvb_frontend_ioctl
[ 173.554811] dvb_frontend_ioctl
[ 173.756052] dvb_frontend_ioctl
[ 173.757425] dvb_frontend_ioctl
[ 173.757431] dvb_frontend_add_event
[ 173.758070] dvb_frontend_swzigzag_autotune: drift:0 inversion:1
auto_step:0 auto_sub_step:0 started_auto_step:0
[ 173.760934] zl10353: zl10353_calc_nominal_rate: bw 7, adc_clock
450560 => 0x5ae9
[ 173.761828] zl10353: zl10353_calc_input_freq: if2 361667, ife 88893,
adc_clock 450560 => -12930 / 0xcd7e
[ 173.763385] xc2028 2-0061: xc2028_set_params called
[ 173.763391] xc2028 2-0061: generic_set_freq called
[ 173.763780] xc2028 2-0061: should set frequency 205625 kHz
[ 173.763786] xc2028 2-0061: check_firmware called
[ 173.763789] xc2028 2-0061: checking firmware, user requested
type=F8MHZ D2620 DTV7 (8a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 173.763800] xc2028 2-0061: BASE firmware not changed.
[ 173.763803] Skip base<7>xc2028 2-0061: Std-specific firmware already
loaded.
[ 173.763809] xc2028 2-0061: SCODE firmware already loaded.
[ 173.763813] xc2028 2-0061: xc2028_get_reg 0004 called
[ 173.765939] xc2028 2-0061: xc2028_get_reg 0008 called
[ 173.768126] xc2028 2-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7
[ 173.782342] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_RESET_CLK 1
[ 173.902113] xc2028 2-0061: divisor= 00 00 32 b8 (freq=205.625)
[ 173.957394] dvb_frontend_ioctl
[ 174.158652] dvb_frontend_ioctl
[ 174.359882] dvb_frontend_ioctl
[ 174.561108] dvb_frontend_ioctl
[ 174.762363] dvb_frontend_ioctl
[ 174.903148] dvb_frontend_add_event
[ 174.903426] dvb_frontend_swzigzag_autotune: drift:0 inversion:0
auto_step:0 auto_sub_step:1 started_auto_step:0
[ 174.906293] zl10353: zl10353_calc_nominal_rate: bw 7, adc_clock
450560 => 0x5ae9
[ 174.907186] zl10353: zl10353_calc_input_freq: if2 361667, ife 88893,
adc_clock 450560 => -12930 / 0xcd7e
[ 174.908720] xc2028 2-0061: xc2028_set_params called
[ 174.908726] xc2028 2-0061: generic_set_freq called
[ 174.909161] xc2028 2-0061: should set frequency 205625 kHz
[ 174.909167] xc2028 2-0061: check_firmware called
[ 174.909171] xc2028 2-0061: checking firmware, user requested
type=F8MHZ D2620 DTV7 (8a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 174.909181] xc2028 2-0061: BASE firmware not changed.
[ 174.909184] Skip base<7>xc2028 2-0061: Std-specific firmware already
loaded.
[ 174.909190] xc2028 2-0061: SCODE firmware already loaded.
[ 174.909194] xc2028 2-0061: xc2028_get_reg 0004 called
[ 174.911370] xc2028 2-0061: xc2028_get_reg 0008 called
[ 174.912227] xc2028 2-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7
[ 174.925768] cx88[0]/2-dvb: cx88_xc3028_callback: XC2028_RESET_CLK 1
[ 174.963629] dvb_frontend_ioctl
[ 175.045724] xc2028 2-0061: divisor= 00 00 32 b8 (freq=205.625)
[ 175.247850] dvb_frontend_ioctl
[ 175.449076] dvb_frontend_ioctl
[ 175.650321] dvb_frontend_ioctl
[ 175.851554] dvb_frontend_ioctl
[ 175.852892] dvb_frontend_release
[ 175.852897] cx88[0]/2-dvb: cx8802_dvb_advise_release
[ 176.045401] xc2028 2-0061: xc2028_sleep called
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
