> Hey, > If it's detecting and working as the 777 A16AR then it would make > sense to add it to the existing page, similar to the A16AR/A16D > Hybrid+FM Page. > As to the first question, the 7162 development seemed to be still > progressing as of last month: > http://article.gmane.org/gmane.linux.drivers.dvb/43048 Hey, hey. Here are few pictures (slow link): ftp://farba.eu.org//download/AVER777A16A-C.zip lspci -vv: 01:0a.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Avermedia Technologies Inc Unknown device 2c05 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 7 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 And dmesg output: Aug 29 18:24:23 mincho kernel: saa7130/34: v4l2 driver version 0.2.14 loaded Aug 29 18:24:23 mincho kernel: saa7133[0]: found at 0000:01:0a.0, rev: 209, irq: 7, latency: 32, mmio: 0xe4000000 Aug 29 18:24:23 mincho kernel: saa7133[0]: subsystem: 1461:2c05, board: AverTV DVB-T 777 [card=85,autodetected] Aug 29 18:24:23 mincho kernel: saa7133[0]: board init: gpio is 2e400 Aug 29 18:24:23 mincho kernel: input: saa7134 IR (AverTV DVB-T 777) as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input7 Bag your pardon for writing to priv address. Cheers, cheers. -- WK --------------------------------------------------------------- Nasilaja sie kradzieze. Mieszkancy osiedli zaniepokojeni. Prosimy o pomoc w tej sprawie >>> http://link.interia.pl/f1eef _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
