> > Hmmm... You're the second person to see that behavior. Weird. > > Did you apply the patch I sent out for the driver as well, or did you > just replace the firmware file? > > Devin > > > -- > Devin J. Heitmueller > http://www.devinheitmueller.com > AIM: devinheitmueller Devin, I did a little more debugging and it seems that the I still have a problem with the .20 version. However, you only see it after a cold reset ie when you need to load the firmware. See below for the first dmesg which is with the .20 firmware. As you can see the card is found but only in a cold state. The second dmesg is with the .10 firmware and the card is found firstly in a cold state and then in a warm state. Each of these dmesg outputs have been after a power off from the power supply for 10 seconds ie no power to backplane. .20 Firmware - Not working: [ 33.016231] dib0700: loaded with support for 7 different device-types [ 33.016463] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware -- [ 33.071378] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' [ 33.080751] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.2-2.3 [ 33.080763] usbcore: registered new interface driver usbhid [ 33.080771] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.277932] usbcore: registered new interface driver dvb_usb_dib0700 [ 33.611862] lp: driver loaded but no devices found [ 33.656757] w83627ehf: Found W83627DHG chip at 0x290 [ 33.679680] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 33.679707] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 33.889981] Adding 9847804k swap on /dev/sda5. Priority:-1 extents:1 across:9847804k [ 34.561845] EXT3 FS on sda1, internal journal .10 Firmware Working: [ 32.242798] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 32.275449] Linux video capture interface: v2.00 -- [ 32.316276] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' -- [ 32.659286] dib0700: firmware started successfully. -- [ 33.159764] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 33.159793] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 33.159925] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 33.273283] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 33.312133] MT2060: successfully identified (IF1 = 1258) [ 33.786468] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 33.786660] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 33.792214] DVB: registering frontend 2 (DiBcom 3000MC/P)... [ 33.796959] MT2060: successfully identified (IF1 = 1255) [ 34.352045] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:00.2/usb9/9-1/input/input6 [ 34.378748] dvb-usb: schedule remote query interval to 150 msecs. [ 34.378750] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. Files: ls -al /lib/firmware -rw-r--r-- 1 root root 34306 2008-08-29 07:38 dvb-usb-dib0700-1.10.fw -rw-r--r-- 1 root root 34306 2008-08-28 09:11 dvb-usb-dib0700-1.10.fw.original -rw-r--r-- 1 root root 33768 2008-08-28 09:10 dvb-usb-dib0700-1.20.fw I have not applied the patch as I followed instructions on http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500 which doesnt mention this. I am using the latest v4l-dvb source. I can apply the patch to test if required. Can you please let me know where this is and I will try it. Tom _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
