with "open" channel situation little bit different: ./zap -adapter 0 -caslotnum 0 -channels /srv/mantis_c/sport.conf -secfile /srv/mantis_c/sec.cfg -secid c10750 'open_channel' Using frontend "Fujitsu MB86A16 DVB-S", type DVB-S status SCVYL | signal ff76 | snr ff12 | ber 00000000 | unc 00000001 | FE_HAS_LOCK CAM Application type: 01 CAM Application manufacturer: 0500 CAM Manufacturer code: 0500 CAM Menu string: Viaccess CAM supports the following ca system ids: 0x0500 Received new PMT - sending to CAM... en50221_stdcam_llci_poll: Error reported by stack:-2 dmesg: kernel: mantis_hif_write_wait (0): Adater(0) Slot(0): Write operation timed out! kernel: mantis_hif_write_iom (0): Adapter(0) Slot(0): HIF Smart Buffer operation failed kernel: mantis_hif_write_wait (0): Adater(0) Slot(0): Write operation timed out! kernel: mantis_hif_write_iom (0): Adapter(0) Slot(0): HIF Smart Buffer operation failed kernel: dvb_ca adapter 0: CAM tried to send a buffer larger than the link buffer size (16384 > 128)! kernel: mantis_hif_write_wait (0): Adater(0) Slot(0): Write operation timed out! kernel: mantis_hif_write_iom (0): Adapter(0) Slot(0): HIF Smart Buffer operation failed kernel: dvb_ca adapter 0: DVB CAM link initialisation failed :( kernel: mantis stop feed and dma kernel: vp1034_set_voltage (0): Frontend (dummy) POWERDOWN and after unload/reload all dvb* modules when modprobe mantis.ko it kernel panic. If anybody has experience with dvb_ca - help please with advice bb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
