Hello, the new firmware dvb-usb-dib0700-1.20.fw does not solve the usb disconnect und i2c read/write errors. With 1.10 I had 1-2 i2c rw-errors per month. Now I have 1-2 rw-errors per day. I'm using kernel 2.6.26.1 with dvb-usb-dib0700-1.20.fw. Hardware is Hauppauge Nova-TD Stick, Mobo MSI KT4-V (Via KT400) Aug 24 08:29:39 etch-server kernel: dib0700: loaded with support for 7 different device-types Aug 24 08:29:39 etch-server kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in cold state, will try to load a firmware Aug 24 08:29:39 etch-server kernel: firmware: requesting dvb-usb-dib0700-1.20.fw Aug 24 08:29:39 etch-server kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' Aug 24 08:29:39 etch-server kernel: dib0700: firmware started successfully. Aug 24 08:29:39 etch-server kernel: dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in warm state. Aug 24 08:29:39 etch-server kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Aug 24 08:29:39 etch-server kernel: DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity) Aug 24 08:29:39 etch-server kernel: DVB: registering frontend 0 (DiBcom 7000PC)... Aug 24 08:29:39 etch-server kernel: MT2266: successfully identified Aug 24 08:29:39 etch-server kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Aug 24 08:29:39 etch-server kernel: DVB: registering new adapter (Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity) Aug 24 08:29:39 etch-server kernel: DVB: registering frontend 1 (DiBcom 7000PC)... Aug 24 08:29:39 etch-server kernel: MT2266: successfully identified Aug 24 08:29:39 etch-server kernel: dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity successfully initialized and connected. Aug 24 08:29:39 etch-server kernel: usbcore: registered new interface driver dvb_usb_dib0700 [...] Aug 24 10:33:48 etch-server kernel: usb 1-6: USB disconnect, address 3 Aug 24 10:33:48 etch-server kernel: MT2266 I2C write failed Aug 24 10:33:48 etch-server kernel: MT2266 I2C write failed Aug 24 10:34:08 etch-server vdr: [3160] ERROR: frontend 0: Kein passendes Gerät gefunden Aug 24 10:34:08 etch-server kernel: MT2266 I2C write failed (len=9) Aug 24 10:34:08 etch-server kernel: MT2266 I2C write failed (len=4) Aug 24 10:34:08 etch-server kernel: MT2266 I2C write failed (len=3) Aug 24 10:34:08 etch-server kernel: MT2266 I2C read failed Aug 24 10:34:08 etch-server last message repeated 8 times Aug 24 10:34:08 etch-server kernel: dvb-usb: error while stopping stream. Aug 24 10:34:08 etch-server kernel: MT2266 I2C read failed Aug 24 10:34:09 etch-server kernel: dvb-usb: error while stopping stream. Aug 24 10:34:10 etch-server vdr: [3181] ERROR: can't set filter (pid=18, tid=4E, mask=FE): Kein passendes Gerät gefunden Aug 24 10:34:10 etch-server kernel: dvb-usb: could not submit URB no. 0 - get them all back Aug 24 10:34:10 etch-server kernel: dvb-usb: error while enabling fifo. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
