hello list I'm using Anssi Hannula patch (multiproto-support-old-api.diff from May 23) to use my Azurwave/Twinhan 1041 card with the old dvb api. I can perfectly scan (using modified scan from manu) and tune the card (using szap2), but kaffeine (v0.8.6) and vdr (v1.6.0) show problems tuning with that card. It is sort of unreliable: sometimes tuning works fast and fine (namely if you stay on the sane transponder, just changing the pids) but sometimes output of vdr syslog stays like this: Aug 21 16:09:37 ubuXFE vdr: [26566] switching to channel 1 Aug 21 16:09:37 ubuXFE vdr: [26830] transfer thread ended (pid=26566, tid=26830) Aug 21 16:09:37 ubuXFE vdr: [26566] buffer stats: 192700 (9%) used Aug 21 16:09:37 ubuXFE vdr: [26566] buffer stats: 0 (0%) used Aug 21 16:09:37 ubuXFE kernel: [ 7972.116198] mantis stop feed and dma Aug 21 16:09:37 ubuXFE vdr: [26832] TS buffer on device 1 thread ended (pid=26566, tid=26832) Aug 21 16:09:38 ubuXFE vdr: [26831] buffer stats: 61288 (2%) used Aug 21 16:09:38 ubuXFE vdr: [26831] receiver on device 1 thread ended (pid=26566, tid=26831) Aug 21 16:09:38 ubuXFE kernel: [ 7972.168637] mantis start feed & dma Aug 21 16:09:38 ubuXFE vdr: [26892] transfer thread started (pid=26566, tid=26892) Aug 21 16:09:38 ubuXFE vdr: [26893] receiver on device 1 thread started (pid=26566, tid=26893) Aug 21 16:09:38 ubuXFE vdr: [26894] TS buffer on device 1 thread started (pid=26566, tid=26894) Aug 21 16:09:38 ubuXFE kernel: [ 7972.317323] stb0899_search: set DVB-S params Aug 21 16:09:38 ubuXFE kernel: [ 7972.341396] stb6100_set_bandwidth: Bandwidth=61262500 Aug 21 16:09:38 ubuXFE kernel: [ 7972.345572] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:09:38 ubuXFE kernel: [ 7972.368189] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:09:38 ubuXFE kernel: [ 7972.439522] stb6100_set_frequency: Frequency=1237000 Aug 21 16:09:38 ubuXFE kernel: [ 7972.443941] stb6100_get_frequency: Frequency=1236990 Aug 21 16:09:38 ubuXFE kernel: [ 7972.455680] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:09:39 ubuXFE kernel: [ 7973.350734] stb0899_search: set DVB-S params Aug 21 16:09:38 ubuXFE kernel: [ 7972.341396] stb6100_set_bandwidth: Bandwidth=61262500 [...] these messages from stb6100 module get repeated exactly like this for several times - it takes sometimes a minute until lock is suddenly established showing the following log output Aug 21 16:10:35 ubuXFE kernel: [ 8029.111530] stb0899_search: set DVB-S params Aug 21 16:10:35 ubuXFE kernel: [ 8029.133851] stb6100_set_bandwidth: Bandwidth=61262500 Aug 21 16:10:35 ubuXFE kernel: [ 8029.138025] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:10:35 ubuXFE kernel: [ 8029.160773] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:10:35 ubuXFE kernel: [ 8029.223988] stb6100_set_frequency: Frequency=1237000 Aug 21 16:10:35 ubuXFE kernel: [ 8029.228163] stb6100_get_frequency: Frequency=1236990 Aug 21 16:10:35 ubuXFE kernel: [ 8029.241120] stb6100_get_bandwidth: Bandwidth=62000000 Aug 21 16:10:35 ubuXFE vdr: [26892] setting audio track to 1 (0) dmesg repeatly shows the same log output as mentioned from syslog above: [ 8029.111530] stb0899_search: set DVB-S params [ 8029.133851] stb6100_set_bandwidth: Bandwidth=61262500 [ 8029.138025] stb6100_get_bandwidth: Bandwidth=62000000 [ 8029.160773] stb6100_get_bandwidth: Bandwidth=62000000 [ 8029.223988] stb6100_set_frequency: Frequency=1237000 [ 8029.228163] stb6100_get_frequency: Frequency=1236990 [ 8029.241120] stb6100_get_bandwidth: Bandwidth=62000000 #lsmod |grep mantis mantis 43396 17 lnbp21 3200 1 mantis mb86a16 21632 1 mantis stb6100 8836 1 mantis tda10021 7684 1 mantis tda10023 7300 1 mantis stb0899 36224 1 mantis stv0299 11528 1 mantis dvb_core 89596 2 mantis,stv0299 i2c_core 24832 9 mantis,lnbp21,mb86a16,stb6100,tda10021,tda10023,stb0899,stv0299,nvidia #lscpi 01:05.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) The mantis sources I applied the patch to are from hg repository: http://www.linuxtv.org/wiki/index.php/Azurewave_AD_SP400_CI_(VP-1041)#Drivers> (Method 2) I hope someone can shatter some light what I'm doing wrong and how it can be fixed to tune a little faster than one station lock per minute :-) If modular log output is to short I can offer you a "verbosity level = 5"-built mantis module in action... actually it is built with verbosity level=1 thanks in advance for helping! _________________________________________________________________ Windows Live Spaces - Ihr Leben, Ihr Space. Hier klicken und informieren. http://get.live.com/spaces/overview _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
