I have just upgraded to the Ubuntu development branch to see if I can get the Hauppauge HVR 1800 Analog working. I have extracted the firmware and placed it in the /lib/firmware/<kernel-vers> directory. I can view video with tvtime but I do not get any audio, but this is true on my other tuners. I then tried to use mythtv and was successful at getting both audio and video a few times. After that I did not have any luck. I tried shutting down and then bringing the system back up but that did not help. I have attached some relevant error messages.
Output from dmesg:
[ 248.423820] Firmware and/or mailbox pointer not initialized or corrupted, signature = 0xffffffff, cmd = STOP_CAPTURE
[ 249.594310] Firmware and/or mailbox pointer not initialized or corrupted, signature = 0xffffffff, cmd = PING_FW
[ 249.594370] firmware: requesting v4l-cx23885-enc.fw
[ 279.676376] __ratelimit: 3 messages suppressed
[ 279.676384] mythbackend[6502]: segfault at 144 ip b7cc699d sp ac0f4f40 error 4 in libmythtv-0.22.so.0.22.0[b7462000+a87000]
Output from mythbackend:
2008-08-18 18:44:29.335 TVRec(1): Changing from None to WatchingLiveTV
2008-08-18 18:44:29.340 TVRec(1): HW Tuner: 1->1
2008-08-18 18:44:30.690 Channel(/dev/video2) Error: InitPictureAttribute(brightness): failed to query controls.
eno: Invalid argument (22)
2008-08-18 18:44:31.781 Channel(/dev/video2) Error: InitPictureAttribute(brightness): failed to query controls.
eno: Invalid argument (22)
2008-08-18 18:44:31.781
Not ivtv or pvrusb2 or hdpvr driver
2008-08-18 18:44:31.783 MPEGRec(/dev/video2) Warning: Unable to get recording volume parameters(max/min)
eno: Invalid argument (22)
using default range [0,65535].
2008-08-18 18:44:31.792 AutoExpire: CalcParams(): Max required Free Space: 2.0 GB w/freq: 15 min
2008-08-18 18:44:33.021 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.022 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.023 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.023 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.024 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.024 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.027 MPEGRec(/dev/video2) Error: Device error detected
2008-08-18 18:44:33.027 DevRdB(/dev/video2) Error: Stop(): Not running.
2008-08-18 18:44:33.027 MPEGRec(/dev/video2) Error: StopEncoding
eno: Invalid argument (22)
After that the video is messed up from tvtime. I am currently using kernel 2.6.26-5-generic so I believe it should have some of the latest code for this card. Is this a known issue or are there any suggestions?
Output from dmesg:
[ 248.423820] Firmware and/or mailbox pointer not initialized or corrupted, signature = 0xffffffff, cmd = STOP_CAPTURE
[ 249.594310] Firmware and/or mailbox pointer not initialized or corrupted, signature = 0xffffffff, cmd = PING_FW
[ 249.594370] firmware: requesting v4l-cx23885-enc.fw
[ 279.676376] __ratelimit: 3 messages suppressed
[ 279.676384] mythbackend[6502]: segfault at 144 ip b7cc699d sp ac0f4f40 error 4 in libmythtv-0.22.so.0.22.0[b7462000+a87000]
Output from mythbackend:
2008-08-18 18:44:29.335 TVRec(1): Changing from None to WatchingLiveTV
2008-08-18 18:44:29.340 TVRec(1): HW Tuner: 1->1
2008-08-18 18:44:30.690 Channel(/dev/video2) Error: InitPictureAttribute(brightness): failed to query controls.
eno: Invalid argument (22)
2008-08-18 18:44:31.781 Channel(/dev/video2) Error: InitPictureAttribute(brightness): failed to query controls.
eno: Invalid argument (22)
2008-08-18 18:44:31.781
Not ivtv or pvrusb2 or hdpvr driver
2008-08-18 18:44:31.783 MPEGRec(/dev/video2) Warning: Unable to get recording volume parameters(max/min)
eno: Invalid argument (22)
using default range [0,65535].
2008-08-18 18:44:31.792 AutoExpire: CalcParams(): Max required Free Space: 2.0 GB w/freq: 15 min
2008-08-18 18:44:33.021 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.022 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.023 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.023 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.024 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.024 DevRdB(/dev/video2) Error: Problem reading fd(34)
eno: Input/output error (5)
2008-08-18 18:44:33.027 MPEGRec(/dev/video2) Error: Device error detected
2008-08-18 18:44:33.027 DevRdB(/dev/video2) Error: Stop(): Not running.
2008-08-18 18:44:33.027 MPEGRec(/dev/video2) Error: StopEncoding
eno: Invalid argument (22)
After that the video is messed up from tvtime. I am currently using kernel 2.6.26-5-generic so I believe it should have some of the latest code for this card. Is this a known issue or are there any suggestions?
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
