Ales Jurik wrote: > Hi, > > I've got a HVR-4000, but I have now some very strange problems. > I have Debian Leeny with 2.6.25-2 kernel and multiproto from Igor Lipianin hg > running at Athlon64 X2 2700+ and Asus M2N-DVI mobo. > Whole multiproto tree compiled without any problem. > > - when starting system I got this message: > > [ 24.658572] tda9887 0-0043: i2c i/o error: rc == -121 (should be 4) > [ 24.659047] tuner-simple 0-0061: i2c i/o error: rc == -121 (should be 4) > [ 23.609971] tda9887 0-0043: i2c i/o error: rc == -121 (should be 4) > > - the firmware is loaded into the card at first time the card is opened - it > is okay? > > [ 917.660620] cx24116_firmware_ondemand: Waiting for firmware upload > (dvb-fe-cx24116.fw)... > [ 917.703010] cx24116_firmware_ondemand: Waiting for firmware upload(2)... > [ 922.703870] cx24116_load_firmware: FW version 1.22.82.0 > [ 922.703889] cx24116_firmware_ondemand: Firmware upload complete > > The result is that only for some channels it is possible to get lock with > szap2. VDR is hanging (or starting) when trying to tune to initial channel, > even when this channel is set to channel at which is szap2 successfull. I'm > not able to say criteria which channels are possible to lock. > > Any hints are appreciated. I fixed an issue with cx88 sometime ago where a value of 0 (taken from the cards struct) was being written to the GPIO register, resulting in the same i2c issues. It looks a lot like this. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb