Hi to all around here, nice to meet you.
(Abraham I sent you a copy of this message last night ;) )
I have a question for you about of using a Skystar HD2 dvb board on Linux.
The scenario:
Software:
Ubuntu Hardy 8.04
Kernel 2.6.24-19-generic.
Hardware:
Motherboard: MSI K8T Neo2 v2.0 (socket 939)
CPU: AMDx2 4200
Ram: 1Gb
DVB Board: TechniSat SkyStar HD2
The problem:
The device /dev/dvb/adapter0/dvr0 doesn't stream data
What I do:
I had followed the "howto run a TechniSat Skystar HD2 on linux" at
http://www.munz.li/?p=47, in order to get the board working on Linux.
I successfully do it following this steps:
1. hg clone http://jusst.de/hg/mantis
2. change the define "#define TECHNISAT_SKYSTAR_HD2 0x0001" in
mantis_vp1041.h to 0x0003 as my board have this product id
3. make; make install
After that I had the board recognized at boot time, and a new device
appears on /dev/dvb.
Then I downloaded patched and compiled the dvb-apps as said on
http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_S2_PCI_HD_CI#Install_dvb-apps_.28scan.2Fszap2_based_on_DVB_API_3.3.29_.28Testing_based_on_revision_1200.29
Nothing special difficult or problematic.
All works ok (well if all were working I will not writting this email
;) ), scan scans the channel list (I am pointing to Astra 19.2) and
save it correctly, I can see the channels and all seems to be ok.
szap2 works ok too, it successfully gets the lock of the channel, and
seems to be working correctly.
But one thing doesn't works ok (the final stage), while szap2 is
running as I understand, the data stream of the tuned channel is
available on /dev/dvb/adapter0/dvr0 , the problems is that this video
device doesn't stream data, any program that I tried fails to get data
from it, ones blocks others give an error, and dd can't suck anything
from it.
I don't know what can I do to trace the problem, or if I can debug
something (I never debugged a kernel driver) or if I can turn
something on for logging what is going wrong.
With this email I had attached to you the output of:
dmesg
szap2 -r -n 975 (975 is an FTA channel at Spain)
lspci -vv
I don't know if this is relevant but when I run "szap2 -r -n 975" this
is emitted to /var/log/messages:
Aug 18 10:58:20 nemesis kernel: [ 3893.419186] newfec_to_oldfec:
Unsupported FEC 9
Aug 18 10:58:20 nemesis kernel: [ 3893.419192] dvb_frontend_ioctl:
FESTATE_RETUNE: fepriv->state=2
Aug 18 10:58:20 nemesis kernel: [ 3893.450078] stb6100_set_bandwidth:
Bandwidth=51610000
Aug 18 10:58:20 nemesis kernel: [ 3893.454548] stb6100_get_bandwidth:
Bandwidth=52000000
Aug 18 10:58:20 nemesis kernel: [ 3893.477212] stb6100_get_bandwidth:
Bandwidth=52000000
Aug 18 10:58:20 nemesis kernel: [ 3893.547812] stb6100_set_frequency:
Frequency=1935000
Aug 18 10:58:20 nemesis kernel: [ 3893.551992] stb6100_get_frequency:
Frequency=1934982
Aug 18 10:58:20 nemesis kernel: [ 3893.563971] stb6100_get_bandwidth:
Bandwidth=52000000
And also I don't know if this can help, it seems that something more
happens if I add the parameter "-p" to the szap2 call
Aug 18 11:13:05 nemesis kernel: [ 4777.580011] newfec_to_oldfec:
Unsupported FEC 9
Aug 18 11:13:05 nemesis kernel: [ 4777.580016] dvb_frontend_ioctl:
FESTATE_RETUNE: fepriv->state=2
Aug 18 11:13:05 nemesis kernel: [ 4777.580303] mantis start feed & dma
Aug 18 11:13:05 nemesis kernel: [ 4777.603643] stb6100_set_bandwidth:
Bandwidth=51610000
Aug 18 11:13:05 nemesis kernel: [ 4777.607912] stb6100_get_bandwidth:
Bandwidth=52000000
Aug 18 11:13:05 nemesis kernel: [ 4777.630568] stb6100_get_bandwidth:
Bandwidth=52000000
Aug 18 11:13:05 nemesis kernel: [ 4777.694828] stb6100_set_frequency:
Frequency=1935000
Aug 18 11:13:05 nemesis kernel: [ 4777.699101] stb6100_get_frequency:
Frequency=1934982
Aug 18 11:13:05 nemesis kernel: [ 4777.710985] stb6100_get_bandwidth:
Bandwidth=52000000
Aug 18 11:13:05 nemesis kernel: [ 4777.935869] mantis stop feed and dma
Aug 18 11:13:05 nemesis kernel: [ 4777.935900] mantis start feed & dma
Aug 18 11:13:11 nemesis kernel: [ 4783.558239] mantis stop feed and dma
Ummmm here is something new, while I was writting down this email I
make something different, in order to see if there is data on the
device I use dd if=/dev/dvb/adapter0/dvr0 of=test.ts bs=1M count=10 ,
and I didn't get data, but I had tried with lower values, bs=1024
count=1 and without the -p parameter I have the same results, but with
-p I get data, at a low speed I think and maybe wrong but I get some
data:
dd if=/dev/dvb/adapter0/dvr0 of=test.ts bs=1024 count=100
100+0 records in
100+0 records out
102400 bytes (102 kB) copied, 34.422 s, 3.0 kB/s
3 kB/s is very very low speed, 34 seconds for 100kBs is no data for a
video stream
I don't know if I am missing something or if I am doing something
wrong. Also I can say that (snif snif) the board works ok on WinXP.
Well I am pleased to meet you, thanks for your support and have kind
regards from Spain.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4f60
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8DC0 checksum 0
[ 0.000000] ACPI: RSDP 000F8DC0, 0014 (r0 VIAK8T)
[ 0.000000] ACPI: RSDT 3FEF3040, 0034 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FEF3180, 4F07 (r1 VIAK8T AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: SSDT 3FEF81C0, 01CA (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: SRAT 3FEF8400, 00A0 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: APIC 3FEF8100, 0068 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:11 APIC version 17
[ 0.000000] Processor #1 15:11 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827
[ 0.000000] Kernel command line: root=UUID=5ce49198-7d9b-4995-808a-4b6e08c76681 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2200.040 MHz processor.
[ 27.283368] Console: colour VGA+ 80x25
[ 27.283371] console [tty0] enabled
[ 27.283745] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 27.284083] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.303121] Memory: 1026348k/1047488k available (2177k kernel code, 20460k reserved, 1006k data, 368k init, 129984k highmem)
[ 27.303128] virtual kernel memory layout:
[ 27.303129] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 27.303130] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 27.303131] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 27.303132] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 27.303133] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 27.303134] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 27.303135] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 27.303138] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 27.303170] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 27.383116] Calibrating delay using timer specific routine.. 4405.03 BogoMIPS (lpj=8810068)
[ 27.383139] Security Framework initialized
[ 27.383144] SELinux: Disabled at boot.
[ 27.383156] AppArmor: AppArmor initialized
[ 27.383160] Failure registering capabilities with primary security module.
[ 27.383167] Mount-cache hash table entries: 512
[ 27.383265] Initializing cgroup subsys ns
[ 27.383268] Initializing cgroup subsys cpuacct
[ 27.383277] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
[ 27.383284] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 27.383286] CPU: L2 Cache: 512K (64 bytes/line)
[ 27.383288] CPU 0(2) -> Core 0
[ 27.383290] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
[ 27.383298] Compat vDSO mapped to ffffe000.
[ 27.383307] Checking 'hlt' instruction... OK.
[ 27.399348] SMP alternatives: switching to UP code
[ 27.400400] Early unpacking initramfs... done
[ 27.678704] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 27.678720] SMP alternatives: switching to SMP code
[ 27.679133] Booting processor 1/1 eip 3000
[ 27.690310] Initializing CPU#1
[ 27.767915] Calibrating delay using timer specific routine.. 4399.55 BogoMIPS (lpj=8799119)
[ 27.767921] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
[ 27.767927] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 27.767929] CPU: L2 Cache: 512K (64 bytes/line)
[ 27.767931] CPU 1(2) -> Core 1
[ 27.767932] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
[ 27.766891] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[ 27.766908] Total of 2 processors activated (8804.59 BogoMIPS).
[ 27.767409] ENABLING IO-APIC IRQs
[ 27.767747] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 28.022554] Brought up 2 CPUs
[ 28.022625] CPU0 attaching sched-domain:
[ 28.022627] domain 0: span 03
[ 28.022629] groups: 01 02
[ 28.022631] CPU1 attaching sched-domain:
[ 28.022633] domain 0: span 03
[ 28.022634] groups: 02 01
[ 28.022803] net_namespace: 64 bytes
[ 28.022807] Booting paravirtualized kernel on bare hardware
[ 28.023216] Time: 1:06:23 Date: 08/18/08
[ 28.023237] NET: Registered protocol family 16
[ 28.023390] EISA bus registered
[ 28.031058] PCI: PCI BIOS revision 2.10 entry at 0xfb050, last bus=1
[ 28.031059] PCI: Using configuration type 1
[ 28.031062] Setting up standard PCI resources
[ 28.035594] ACPI: Interpreter disabled.
[ 28.035597] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.035619] pnp: PnP ACPI: disabled
[ 28.035621] PnPBIOS: Scanning system for PnP BIOS support...
[ 28.035835] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbad0
[ 28.035840] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbb00, dseg 0xf0000
[ 28.036540] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
[ 28.036701] PCI: Probing PCI hardware
[ 28.036703] PCI: Probing PCI hardware (bus 00)
[ 28.038553] PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
[ 28.038566] PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 18
[ 28.038569] PCI->APIC IRQ transform: 0000:00:0d.0[A] -> IRQ 16
[ 28.038572] PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 20
[ 28.038575] PCI->APIC IRQ transform: 0000:00:0f.1[A] -> IRQ 20
[ 28.038577] PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21
[ 28.038580] PCI->APIC IRQ transform: 0000:00:10.1[A] -> IRQ 21
[ 28.038583] PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
[ 28.038586] PCI->APIC IRQ transform: 0000:00:10.3[B] -> IRQ 21
[ 28.038589] PCI->APIC IRQ transform: 0000:00:10.4[C] -> IRQ 21
[ 28.038593] PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22
[ 28.038597] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 28.078415] NET: Registered protocol family 8
[ 28.078417] NET: Registered protocol family 20
[ 28.078468] AppArmor: AppArmor Filesystem Enabled
[ 28.078499] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 28.078502] system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 28.078505] system 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 28.078507] system 00:07: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 28.078510] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[ 28.078514] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[ 28.078516] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[ 28.078519] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[ 28.078521] system 00:08: iomem range 0xdcc00-0xdffff has been reserved
[ 28.078820] PCI: Bridge: 0000:00:01.0
[ 28.078823] IO window: d000-dfff
[ 28.078827] MEM window: d0000000-efffffff
[ 28.078829] PREFETCH window: 40000000-400fffff
[ 28.078843] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.078852] NET: Registered protocol family 2
[ 28.114435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.114678] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 28.115355] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.115687] TCP: Hash tables configured (established 131072 bind 65536)
[ 28.115689] TCP reno registered
[ 28.126482] checking if image is initramfs... it is
[ 28.660578] Freeing initrd memory: 7292k freed
[ 28.662449] audit: initializing netlink socket (disabled)
[ 28.662463] audit(1219021583.252:1): initialized
[ 28.662594] highmem bounce pool size: 64 pages
[ 28.664099] VFS: Disk quotas dquot_6.5.1
[ 28.664159] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.664290] io scheduler noop registered
[ 28.664292] io scheduler anticipatory registered
[ 28.664293] io scheduler deadline registered
[ 28.664301] io scheduler cfq registered (default)
[ 28.664310] PCI: VIA PCI bridge detected. Disabling DAC.
[ 28.664375] Boot video device is 0000:01:00.0
[ 28.664576] isapnp: Scanning for PnP cards...
[ 29.017954] isapnp: No Plug & Play device found
[ 29.040974] Real Time Clock Driver v1.12ac
[ 29.041036] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.041143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.041258] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.041700] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.041943] 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 29.042567] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.042619] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 29.042695] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 29.042698] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 29.042809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.062738] mice: PS/2 mouse device common for all mice
[ 29.062846] EISA: Probing bus 0 at eisa.0
[ 29.062864] Cannot allocate resource for EISA slot 4
[ 29.062881] EISA: Detected 0 cards.
[ 29.062884] cpuidle: using governor ladder
[ 29.062886] cpuidle: using governor menu
[ 29.062958] NET: Registered protocol family 1
[ 29.062977] Using IPI No-Shortcut mode
[ 29.063007] registered taskstats version 1
[ 29.063083] Magic number: 4:531:104
[ 29.063187] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 29.063189] EDD information not available.
[ 29.063409] Freeing unused kernel memory: 368k freed
[ 30.284255] fuse init (API version 7.9)
[ 30.353904] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 30.528462] SCSI subsystem initialized
[ 30.623943] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 30.624176] eth0: RTL8169sc/8110sc at 0xf882a000, 00:19:db:4d:34:04, XID 18000000 IRQ 16
[ 30.636743] usbcore: registered new interface driver usbfs
[ 30.636764] usbcore: registered new interface driver hub
[ 30.636775] libata version 3.00 loaded.
[ 30.637822] usbcore: registered new device driver usb
[ 30.640403] sata_via 0000:00:0f.0: version 2.3
[ 30.640450] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 30.641312] scsi0 : sata_via
[ 30.641391] USB Universal Host Controller Interface driver v3.0
[ 30.645255] scsi1 : sata_via
[ 30.645298] ata1: SATA max UDMA/133 cmd 0xe100 ctl 0xe200 bmdma 0xe500 irq 20
[ 30.645300] ata2: SATA max UDMA/133 cmd 0xe300 ctl 0xe400 bmdma 0xe508 irq 20
[ 30.647374] Floppy drive(s): fd0 is 1.44M
[ 30.664445] FDC 0 is a post-1991 82077
[ 30.847574] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 31.013009] ata1.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
[ 31.013014] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 31.029006] ata1.00: configured for UDMA/133
[ 31.231176] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 31.241847] scsi 0:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5
[ 31.242040] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 31.242269] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 31.242297] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e800
[ 31.242398] usb usb1: configuration #1 chosen from 1 choice
[ 31.242415] hub 1-0:1.0: USB hub found
[ 31.242420] hub 1-0:1.0: 2 ports detected
[ 31.248685] Driver 'sd' needs updating - please use bus_type methods
[ 31.248763] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 31.248774] sd 0:0:0:0: [sda] Write Protect is off
[ 31.248776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.248790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.248826] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 31.248833] sd 0:0:0:0: [sda] Write Protect is off
[ 31.248835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.248846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.248849] sda: sda1 sda2 sda3
[ 31.283956] sd 0:0:0:0: [sda] Attached SCSI disk
[ 31.286523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 31.343874] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 31.343896] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 31.343918] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e900
[ 31.344006] usb usb2: configuration #1 chosen from 1 choice
[ 31.344024] hub 2-0:1.0: USB hub found
[ 31.344029] hub 2-0:1.0: 2 ports detected
[ 31.447052] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 31.447075] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 31.447097] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ea00
[ 31.447181] usb usb3: configuration #1 chosen from 1 choice
[ 31.447200] hub 3-0:1.0: USB hub found
[ 31.447204] hub 3-0:1.0: 2 ports detected
[ 31.486118] Attempting manual resume
[ 31.486122] swsusp: Resume From Partition 8:3
[ 31.486123] PM: Checking swsusp image.
[ 31.486310] PM: Resume from disk failed.
[ 31.496617] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.496621] EXT3-fs: write access will be enabled during recovery.
[ 31.550944] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 31.550965] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 31.550987] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000eb00
[ 31.551081] usb usb4: configuration #1 chosen from 1 choice
[ 31.551100] hub 4-0:1.0: USB hub found
[ 31.551104] hub 4-0:1.0: 2 ports detected
[ 31.655123] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 31.655143] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 31.655174] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8021000
[ 31.666743] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.666847] usb usb5: configuration #1 chosen from 1 choice
[ 31.666866] hub 5-0:1.0: USB hub found
[ 31.666872] hub 5-0:1.0: 8 ports detected
[ 31.776144] pata_via 0000:00:0f.1: version 0.3.3
[ 31.776708] scsi2 : pata_via
[ 31.776920] scsi3 : pata_via
[ 31.776943] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe700 irq 14
[ 31.776946] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe708 irq 15
[ 32.095931] ata3.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 32.267636] ata3.00: configured for UDMA/33
[ 32.435815] scsi 2:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 32.435892] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 32.442062] Driver 'sr' needs updating - please use bus_type methods
[ 32.442998] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 32.443002] Uniform CD-ROM driver Revision: 3.20
[ 32.443035] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 32.605791] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 32.751889] usb 5-5: configuration #1 chosen from 1 choice
[ 32.989551] usbcore: registered new interface driver libusual
[ 32.996173] Initializing USB Mass Storage driver...
[ 32.997233] scsi4 : SCSI emulation for USB Mass Storage devices
[ 32.997671] usbcore: registered new interface driver usb-storage
[ 32.997674] USB Mass Storage support registered.
[ 32.997749] usb-storage: device found at 2
[ 32.997751] usb-storage: waiting for device to settle before scanning
[ 33.253119] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 33.404007] usb 4-1: configuration #1 chosen from 1 choice
[ 33.406962] hub 4-1:1.0: USB hub found
[ 33.408922] hub 4-1:1.0: 4 ports detected
[ 33.723522] usb 4-1.3: new full speed USB device using uhci_hcd and address 3
[ 33.862427] usb 4-1.3: configuration #1 chosen from 1 choice
[ 33.865384] hub 4-1.3:1.0: USB hub found
[ 33.867342] hub 4-1.3:1.0: 3 ports detected
[ 34.174946] usb 4-1.4: new low speed USB device using uhci_hcd and address 4
[ 34.311854] usb 4-1.4: configuration #1 chosen from 1 choice
[ 34.522509] usb 4-1.3.3: new full speed USB device using uhci_hcd and address 5
[ 34.664414] usb 4-1.3.3: configuration #1 chosen from 1 choice
[ 34.684209] usbcore: registered new interface driver hiddev
[ 34.703460] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.4/4-1.4:1.0/input/input1
[ 34.720900] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.3-1.4
[ 34.725423] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3:1.0/input/input2
[ 34.740870] input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.3-1.3.3
[ 34.747281] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3.3/4-1.3.3:1.1/input/input3
[ 34.760847] input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.3-1.3.3
[ 34.760861] usbcore: registered new interface driver usbhid
[ 34.760865] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 37.989560] usb-storage: device scan complete
[ 37.989928] scsi 4:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
[ 37.990419] scsi 4:0:0:1: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
[ 37.993931] sd 4:0:0:0: [sdb] 489472 512-byte hardware sectors (251 MB)
[ 37.994534] sd 4:0:0:0: [sdb] Write Protect is off
[ 37.994536] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 37.994538] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 37.997152] sd 4:0:0:0: [sdb] 489472 512-byte hardware sectors (251 MB)
[ 37.997778] sd 4:0:0:0: [sdb] Write Protect is off
[ 37.997780] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 37.997781] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 37.997784] sdb: sdb1
[ 37.998959] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 37.998988] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 38.000025] sd 4:0:0:1: [sdc] 2880 512-byte hardware sectors (1 MB)
[ 38.000650] sd 4:0:0:1: [sdc] Write Protect is off
[ 38.000652] sd 4:0:0:1: [sdc] Mode Sense: 23 94 00 00
[ 38.000653] sd 4:0:0:1: [sdc] Assuming drive cache: write through
[ 38.005902] sd 4:0:0:1: [sdc] 2880 512-byte hardware sectors (1 MB)
[ 38.006548] sd 4:0:0:1: [sdc] Write Protect is off
[ 38.006551] sd 4:0:0:1: [sdc] Mode Sense: 23 94 00 00
[ 38.006553] sd 4:0:0:1: [sdc] Assuming drive cache: write through
[ 38.006557] sdc: unknown partition table
[ 38.008946] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 38.008981] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 40.632816] kjournald starting. Commit interval 5 seconds
[ 40.632833] EXT3-fs: recovery complete.
[ 40.642383] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.540086] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 48.129784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 48.154559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.221844] r8169: eth0: link up
[ 48.237312] Linux agpgart interface v0.102
[ 48.387774] agpgart: Detected AGP bridge 0
[ 48.392494] agpgart: AGP aperture is 128M @ 0xf0000000
[ 48.627633] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 48.651306] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 48.651336] [fglrx] ASYNCIO init succeed!
[ 48.651556] [fglrx] PAT is enabled successfully!
[ 48.660037] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 48.747521] NET: Registered protocol family 10
[ 48.747708] lo: Disabled Privacy Extensions
[ 48.809390] irq: 18, latency: 32
[ 48.809392] memory: 0xf8022000, mmio: 0xf89b6000
[ 48.809396] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (00:0a.0),
[ 48.809398] Mantis Rev 1 [1ae4:0003], irq: 18, latency: 32
[ 48.809401] memory: 0xf8022000, mmio: 0xf89b6000
[ 48.812076] MAC Address=[00:08:c9:e0:29:11]
[ 48.812106] mantis_alloc_buffers (0): DMA=0x33b60000 cpu=0xf3b60000 size=65536
[ 48.812111] mantis_alloc_buffers (0): RISC=0x1fb51000 cpu=0xdfb51000 size=1000
[ 48.812113] DVB: registering new adapter (Mantis dvb adapter)
[ 48.842583] usbcore: registered new interface driver lmpcm_usb
[ 48.842589] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 49.334003] stb0899_get_dev_id: Device ID=[8], Release=[2]
[ 49.346506] stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
[ 49.359005] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
[ 49.359007] stb0899_attach: Attaching STB0899
[ 49.359009] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 frontend @0x68
[ 49.359012] stb6100_attach: Attaching STB6100
[ 49.359378] DVB: registering frontend 0 (STB0899 Multistandard)...
[ 49.359471] mantis_ca_init (0): Registering EN50221 device
[ 49.359505] mantis_ca_init (0): Registered EN50221 device
[ 49.359511] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
[ 49.358530] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 51.028822] lp: driver loaded but no devices found
[ 51.054926] w83627hf: Found W83627THF chip at 0x290
[ 51.055003] w83627hf w83627hf.656: Reading VID from GPIO5
[ 51.130244] Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k
[ 51.661593] EXT3 FS on sda2, internal journal
[ 52.685209] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 53.262377] powernow_k8: Unknown symbol acpi_processor_notify_smm
[ 53.262416] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[ 53.262487] powernow_k8: Unknown symbol acpi_processor_register_performance
[ 53.285587] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 53.285627] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 53.285744] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 53.285801] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 53.911121] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 53.911127] apm: disabled - APM is not SMP safe.
[ 54.092832] ppdev: user-space parallel port driver
[ 54.181884] audit(1219021609.268:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4865 profile="/usr/sbin/cupsd" namespace="default"
[ 56.658466] Bluetooth: Core ver 2.11
[ 56.658912] NET: Registered protocol family 31
[ 56.658917] Bluetooth: HCI device and connection manager initialized
[ 56.658922] Bluetooth: HCI socket layer initialized
[ 57.280392] Bluetooth: L2CAP ver 2.9
[ 57.280398] Bluetooth: L2CAP socket layer initialized
[ 57.339233] Bluetooth: RFCOMM socket layer initialized
[ 57.339248] Bluetooth: RFCOMM TTY layer initialized
[ 57.339250] Bluetooth: RFCOMM ver 1.8
[ 58.963748] eth0: no IPv6 routers present
[ 60.049157] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 60.049164] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 60.049167] [fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
[ 60.049832] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 60.049888] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 60.050112] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 60.050136] [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[ 60.167686] [fglrx] Reserve Block - 0 offset = 0X1fffb000 length = 0X5000
[ 60.167694] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000
[ 60.167698] [fglrx] Reserve Block - 2 offset = 0Xffa0000 length = 0X60000
[ 60.230417] [fglrx] interrupt source 20008000 successfully enabled
[ 60.230424] [fglrx] enable ID = 0x00000008
[ 60.230438] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 60.230496] [fglrx] interrupt source 10000000 successfully enabled
[ 60.230499] [fglrx] enable ID = 0x00000009
[ 60.230503] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 85.350190] UDF-fs: No VRS found
[ 85.405742] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 85.447948] ISOFS: changing to secondary root
[ 141.060229] usb 5-5: USB disconnect, address 2
beth@nemesis:~$ szap2 -r -n 975
reading channels from file '/home/beth/.szap/channels.conf'
zapping to 975 'TV GALICIA':
sat 0, frequency = 11685 MHz V, symbolrate 22000000, vpid = 0x1fff, apid = 0x1fff sid = 0x760e
Delivery system=DVB-S
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
do_tune: API version=3, delivery system = 0
do_tune: Frequency = 1935000, Srate = 22000000
do_tune: Frequency = 1935000, Srate = 22000000
status 00 | signal 014f | snr 0081 | ber 00000000 | unc fffffffe |
status 1e | signal 014f | snr 0080 | ber 00000000 | unc fffffffe | FE_HAS_LOCK
status 1e | signal 014f | snr 007d | ber 00000000 | unc fffffffe | FE_HAS_LOCK
status 1e | signal 014f | snr 0080 | ber 00000000 | unc fffffffe | FE_HAS_LOCK
status 1e | signal 014f | snr 007f | ber 00000000 | unc fffffffe | FE_HAS_LOCK
status 1e | signal 014a | snr 0081 | ber 00000000 | unc fffffffe | FE_HAS_LOCK
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d0000000-efffffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0a.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Unknown device 1ae4:0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f8022000 (32-bit, prefetchable) [size=4K]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Micro-Star International Co., Ltd. Unknown device 094c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at f8020000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 40100000 [disabled] [size=128K]
Capabilities: <access denied>
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at e100 [size=8]
Region 1: I/O ports at e200 [size=4]
Region 2: I/O ports at e300 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e500 [size=16]
Region 5: I/O ports at e600 [size=256]
Capabilities: <access denied>
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at e700 [size=16]
Capabilities: <access denied>
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e800 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e900 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at ea00 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at eb00 [size=32]
Capabilities: <access denied>
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. K8T Neo2-F V2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at f8021000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Micro-Star International Co., Ltd. Unknown device b010
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at ec00 [size=256]
Capabilities: <access denied>
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc RV535 [Radeon X1650 Series] (rev 9e) (prog-if 00 [VGA controller])
Subsystem: Info-Tek Corp. Unknown device 3030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0030000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller: ATI Technologies Inc RV535 [Radeon X1650 Series] (rev 9e)
Subsystem: Info-Tek Corp. Unknown device 3031
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at e0020000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
