Jody Gugelhupf wrote: > Hi people, > I wrote a script to grab some xml data, in order to do, xine switches channels every 50 seconds for about 150 times. At some point the card stops working and I get error like this: > [672227.942674] dvb-ttpci: StopHWFilter error cmd 0b08 0001 0001 ret ffffff92 resp 0000 0000 pid 0 > [672228.944141] dvb-ttpci: __av7110_send_fw_cmd(): timeout waiting for COMMAND idle > [672228.944150] dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110 > [672228.944154] dvb-ttpci: av7110_fw_cmd error -110 > when i remove and readd the module it works fine again. Anyone has an idea why this happens and what I can do? Below is some information about my system, thx in advance :) > > ubuntu hardy > uname -r > 2.6.24-19-generic > > latest firmware dvb-ttpci-01.fw-2622 No, see below. > Technotrend Premium S-2300 "modded" identical to Hauppauge Nexus-S 2.3, but additional Features > Technotrend Premium 3.5" CI (Common Interface) > > lsmod | egrep dvb > dvb_ttpci 104008 1 > dvb_core 81404 2 dvb_ttpci,stv0299 > saa7146_vv 50304 1 dvb_ttpci > saa7146 20360 2 dvb_ttpci,saa7146_vv > ttpci_eeprom 3456 1 dvb_ttpci > i2c_core 24832 4 dvb_ttpci,lnbp21,stv0299,ttpci_eeprom > > ls /dev/dvb/adapter0/ > audio0 ca0 demux0 dvr0 frontend0 net0 osd0 video0 > > lspci -v > 01:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH Unknown device 000e > Flags: bus master, medium devsel, latency 64, IRQ 20 > Memory at febffc00 (32-bit, non-prefetchable) [size=512] > > lspci -nn > 01:04.0 PCI bridge [0604]: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) [3388:0021] (rev 11) > 01:06.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) > > > dmesg boot info: > [ 25.427881] saa7146: register extension 'dvb'. > [ 25.428202] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 > [ 25.428208] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 20 > [ 25.428230] saa7146: found saa7146 @ mem f8a56c00 (revision 1, irq 20) (0x13c2,0x000e). > [ 25.510688] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 > > [ 25.782505] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3) > [ 25.818655] adapter has MAC addr = 00:d0:5c:09:59:65 > [ 26.026874] dvb-ttpci: gpioirq unknown type=0 len=0 > [ 26.040478] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261c You are using the fw 261c. > ... > [640529.411541] dvb-ttpci: __av7110_send_fw_cmd(): timeout waiting for COMMAND idle > [640529.411551] dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110 > [640529.411554] dvb-ttpci: av7110_fw_cmd error -110 > [640742.112314] dvb-ttpci: __av7110_send_fw_cmd(): timeout waiting for COMMAND idle > [640742.112324] dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110 > [640742.112327] dvb-ttpci: av7110_fw_cmd error -110 This is an ARM crash. > [657733.380748] console-kit-dae[10180]: segfault at 00000000 eip b7e72677 esp bf8ceb44 error 4 ??? > [662729.894931] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [663112.576098] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [663367.977312] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [663739.169201] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [664251.914035] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [664451.448936] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [664581.441263] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [664788.406786] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [665572.507224] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [665857.162666] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [666271.421151] DVB: frontend 0 frequency 4285221296 out of range (950000..2150000) > [667786.852007] DVB: frontend 0 frequency 4285217296 out of range (950000..2150000) What are you doing here? First of all you should try a recent firmware. Please update the firmware to 2622 or to the lastest one http://www.suse.de/~werner/test_av-f12623.tar.bz2 If this doesn not help, the ARM crash might be caused by a bad signal. Currently there is no fix for this problem. Sorry. CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
