I'm happy to hear that. :) it's a shame that you can't try with some dvb signal, but looks good. I've never used kdetv, so no idea.
Albert
Albert
2008/8/12 zePh7r <zeph7r@xxxxxxxxxxxx>
This is looking good. It seems to load the firmware well. I even ran kaffeine and it detected my card instantly. However, as there's no dvb-t service where I live (there's still no dvb-t in Portugal) I can't test it in full. However I tried to do a channel scan and the signal bar showed high strength signals multiple times during scan -- which I interpret as a) the tuner is working, and b) the card is being able to find signal but unable to decode it since it's not a digital signal. I'm getting this output in dmesg just for plugging the device into the usb port:
Aug 12 14:29:29 zeph7r-laptop kernel: usb 4-1: new high speed USB device using ehci_hcd and address 12
Aug 12 14:29:29 zeph7r-laptop kernel: usb 4-1: configuration #1 chosen from 1 choice
Aug 12 14:29:29 zeph7r-laptop kernel: dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in cold state, will try to load a firmware
Aug 12 14:29:29 zeph7r-laptop kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Aug 12 14:29:29 zeph7r-laptop kernel: dib0700: firmware started successfully.
Aug 12 14:29:30 zeph7r-laptop kernel: dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in warm state.
Aug 12 14:29:30 zeph7r-laptop kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Aug 12 14:29:30 zeph7r-laptop kernel: DVB: registering new adapter (Asus My Cinema-U3000Hybrid)
Aug 12 14:29:30 zeph7r-laptop kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Aug 12 14:29:30 zeph7r-laptop kernel: xc2028 2-0061: creating new instance
Aug 12 14:29:30 zeph7r-laptop kernel: xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
Aug 12 14:29:30 zeph7r-laptop kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb4/4-1/input/input13
Aug 12 14:29:30 zeph7r-laptop kernel: dvb-usb: schedule remote query interval to 150 msecs.
Aug 12 14:29:30 zeph7r-laptop kernel: dvb-usb: Asus My Cinema-U3000Hybrid successfully initialized and connected.
Aug 12 14:29:30 zeph7r-laptop kernel: usb 4-1: New USB device found, idVendor=0b05, idProduct=1736
Aug 12 14:29:30 zeph7r-laptop kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 12 14:29:30 zeph7r-laptop kernel: usb 4-1: Product: U3000 Hybrid
Aug 12 14:29:30 zeph7r-laptop kernel: usb 4-1: Manufacturer: ASUSTeK
Aug 12 14:29:30 zeph7r-laptop kernel: usb 4-1: SerialNumber: 8110400333
Aug 12 14:29:36 zeph7r-laptop syslog-ng[1724]: STATS: dropped 0
and after starting kaffeine there's still this more:
Aug 12 14:41:31 zeph7r-laptop kernel: xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Aug 12 14:41:31 zeph7r-laptop kernel: xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
Aug 12 14:41:38 zeph7r-laptop kernel: xc2028 2-0061: Loading firmware for type=D2620 DTV7 (88), id 0000000000000000.
Aug 12 14:41:38 zeph7r-laptop kernel: xc2028 2-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000.
Aug 12 14:42:04 zeph7r-laptop kernel: xc2028 2-0061: Loading firmware for type=D2620 DTV78 (108), id 0000000000000000.
Aug 12 14:42:04 zeph7r-laptop kernel: xc2028 2-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000.
However I also tried kdetv and the card didn't seem to be recognized here. In the device list there is still only my webcam to choose from. If I try to run it from a terminal no significant output is shown. How can go further in testing and getting the analog tv part to work?
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
