On Thursday 07 August 2008 14:51:46 Jody Gugelhupf wrote: > Hi people, > > I have a dvb-s card, I got it working finally in ubuntu :) (more > information about my hardware at the end of the mail, in case it is > needed). I have been looking around for a good dvbstream tutorial, > but haven't really found one, also the man page does not seem to be > complete. I would like to stream from my some the machine with the > dvb-s card to clients in the network and maybe also on the > internet. > > I don't get how to specify the command I have tried several things, > e.g.: dvbstream -f 11567 -p v -s 22000 -D 0 -i 192.168.2.23 -r 1237 > > -f is the frequency in what? hz, mhz, ghz?? Mhz (it's a bit more tolerant than that, but always yse Mhz) > -p polarization, ok that's clear either horizontal or vertical > -s symbolrate also not clear on that, Ksym/sec > -D inidcated which LNB to use, no problem here -D 0 means nothing: 1..4 or A or B > -i to what ip to send the stream? > -r the port on to send the stream use -net ip:port instead > > and what about 22khz tone how can i specify in dvbstream to turn it > on or off it's generated according to diseqc, frequency and polarization > > Here what I get when I execute the command above: > > dvbstream -f 11567 -p v -s 22000 -D 0 and what pids or programs? > dvbstream v0.6 - (C) Dave Chapman 2001-2004 old, use an fresh cvs checkout > Why isn't it able to lock to the signal? I can watch the station on > kaffeine or mplayer or xine... you didn't tell dvbstream what to do > > I also don't understand the channels.conf file syntax completly, if > someon could explain that as well, e.g.: > > ARTE:11567:v:1:22000:167:136:9019 (same as the dvbstream > command above) > > channelname:frequency:polarization:???:symbolrate:???:???:???? > > I guess one is for the audio pid and one for video pid, but which > ones and what about the other 2 remaining entries? frequency:polarization:sat_position(diseqc):video_pid:audio_pid:service_id > > Also can I stream just one channel or more at the same time? as many as you stream, see at the bottom > > And I was wondering about my CI module, it is connected to the > dvb-s card, can I check somehow that it is recognized and working? > I don't have yet a cam or card... there's no support for decryption in dvbstream > > OK that's it would be happy about some help or pointers to some > tutorials or something, thx in advance, > > from here on it's just hardware info about my machine... > thx jody :) > > example: dvbstream -f 11800 -p V -s 22500 -udp -net 224.0.0.1:5000 0 512 650 -prog -net 224.0.0.1:5001 TV1 TV2 -net 192.168.0.11:3000 TV1 TV3 and so on. In short, you can select the streams to transmit by name or by pid and mix them as you want, eventually repeated _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
