Hi,
A number of people in Australia have bought the dual digital 4 only to
find revision 2 contains a completely different chipset (DIBCOM DIB7070P).
I took a look at one this weekend. It has two Cypress FX2's hooked up to
two DIB7070P's; I guess they took the previous design and bolted on the
DIBCOM chips. This means it shares a lot with the cxusb driver as well as
the dib0700 driver.
After some reverse engineering I've come up with the patch below which
works for me (DVB-T reception and remote control). Right now I've copied
bits of the dib0700 driver, I wonder if we need to consolidate that code
in a shared dib7070 driver.
While I'm not downloading any firmware to the DIBCOM chips, I wonder if
the dvb-usb-dib0700-1.10.fw firmware would be usable in this setup. I'm
not even sure how Id go about downloading it yet (the Windows driver
doesn't download any firmware).
Anton
Index: v4l-dvb/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2008-08-04 18:10:30.000000000 +1000
+++ v4l-dvb/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2008-08-04 18:10:46.000000000 +1000
@@ -172,6 +172,7 @@
#define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78
#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70
#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71
+#define USB_PID_DVICO_BLUEBIRD_DUAL_5 0xdb98
#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54
#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55
#define USB_PID_MEDION_MD95700 0x0932
Index: v4l-dvb/linux/drivers/media/dvb/dvb-usb/cxusb.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/dvb-usb/cxusb.c 2008-08-04 18:10:30.000000000 +1000
+++ v4l-dvb/linux/drivers/media/dvb/dvb-usb/cxusb.c 2008-08-04 21:30:20.000000000 +1000
@@ -36,6 +36,8 @@
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "mxl5005s.h"
+#include "dib7000p.h"
+#include "dib0070.h"
/* debug */
static int dvb_usb_cxusb_debug;
@@ -725,6 +727,155 @@
return 0;
}
+/* XXX Copied from dib0700, need to share the original */
+/* DIB7070 generic */
+static struct dibx000_agc_config dib7070_agc_config = {
+ BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
+
+ 600, // inv_gain
+ 10, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 3530, // wbd_ref
+ 1, // wbd_sel
+ 5, // wbd_alpha
+
+ 65535, // agc1_max
+ 0, // agc1_min
+
+ 65535, // agc2_max
+ 0, // agc2_min
+
+ 0, // agc1_pt1
+ 40, // agc1_pt2
+ 183, // agc1_pt3
+ 206, // agc1_slope1
+ 255, // agc1_slope2
+ 72, // agc2_pt1
+ 152, // agc2_pt2
+ 88, // agc2_slope1
+ 90, // agc2_slope2
+
+ 17, // alpha_mant
+ 27, // alpha_exp
+ 23, // beta_mant
+ 51, // beta_exp
+
+ 0, // perform_agc_softsplit
+};
+
+/* XXX Copied from dib0700, need to share the original */
+static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+ 60000, 15000, // internal, sampling
+ 1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ (0 << 25) | 0, // ifreq = 0.000000 MHz
+ 20452225, // timf
+ 12000000, // xtal_hz
+};
+
+static struct dib7000p_config cxusb_dualdig4_rev2_config = {
+ .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = 0xfcef,
+ .gpio_val = 0x0110,
+
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+};
+
+static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
+ err("set interface failed");
+
+ /* XXX Needed? */
+ cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
+
+ cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
+
+ dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &cxusb_dualdig4_rev2_config);
+
+ if ((adap->fe = dvb_attach(dib7000p_attach,
+ &adap->dev->i2c_adap, 0x80,
+ &cxusb_dualdig4_rev2_config)) == NULL)
+ return -EIO;
+
+ return 0;
+}
+
+static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+ return dib7000p_set_gpio(fe, 8, 0, !onoff);
+}
+
+static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ return 0;
+}
+
+static struct dib0070_config dib7070p_dib0070_config = {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070_tuner_reset,
+ .sleep = dib7070_tuner_sleep,
+ .clock_khz = 12000,
+ /* .clock_pad_drive = 4 */
+};
+
+struct dib0700_adapter_state {
+ int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
+};
+
+/* XXX Copied from dib0700, need to share the original */
+static int dib7070_set_param_override(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+
+ u16 offset;
+ u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+ switch (band) {
+ case BAND_VHF: offset = 950; break;
+ case BAND_UHF:
+ default: offset = 550; break;
+ }
+
+ dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+
+ return state->set_param_save(fe, fep);
+}
+
+static int cxusb_dualdig4_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+ &dib7070p_dib0070_config) == NULL)
+ return -ENODEV;
+
+ st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+ adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
+ return 0;
+}
+
static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev, 0, 1) < 0)
@@ -825,6 +976,7 @@
static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
+static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties;
static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
@@ -844,6 +996,9 @@
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties,
THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf,
+ &cxusb_bluebird_dualdig4_rev2_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf,
@@ -875,6 +1030,7 @@
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_5) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1180,6 +1336,54 @@
}
};
+static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+
+ .size_of_priv = sizeof(struct cxusb_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_dualdig4_rev2_frontend_attach,
+ .tuner_attach = cxusb_dualdig4_tuner_attach,
+ .size_of_priv = sizeof(struct dib0700_adapter_state),
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ },
+ },
+
+ .power_ctrl = cxusb_bluebird_power_ctrl,
+
+ .i2c_algo = &cxusb_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .rc_interval = 100,
+ .rc_key_map = dvico_mce_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dvico_mce_rc_keys),
+ .rc_query = cxusb_rc_query,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)",
+ { NULL },
+ { &cxusb_table[17], NULL },
+ },
+ }
+};
+
static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
Index: v4l-dvb/linux/drivers/media/dvb/frontends/dib7000p.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/dib7000p.c 2008-08-04 18:10:30.000000000 +1000
+++ v4l-dvb/linux/drivers/media/dvb/frontends/dib7000p.c 2008-08-04 18:10:46.000000000 +1000
@@ -1359,7 +1359,8 @@
/* Ensure the output mode remains at the previous default if it's
* not specifically set by the caller.
*/
- if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL)
+ if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) &&
+ (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
st->cfg.output_mode = OUTMODE_MPEG2_FIFO;
demod = &st->demod;
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
