Is anyone using the multiproto drivers located here http://jusst.de/hg/multiproto/ with a skystar hd (not just tt3200) successfully?The skystar hd is supposed to be a clone of TT-3200.In the TT-3200 threads most people state that their tuning problems are mostly gone.However i don't see any improvement in mine (in fact if i had to guess id say they are worse).I still need to add 4-5Mhz to get a lock with simpledvbtune which I'm not willing to do to my vdr channels list. Here is an example on astra 19E: Mythbox dvb # ./simpledvbtune -n 0 -f 11954 using '/dev/dvb/adapter0/frontend0' as frontend frontend fd=3: type=0 ioclt: FE_SET_VOLTAGE : 1 High band tone: 1 dvbfe setparams : delsys=1 1354MHz / Rate : 27500kBPS Status: 1e: Carrier Viterbi Sync Lock SNR: 0 62 (0x3e) (6.2dB) BER: 0 0 0 0 (0x0) Signal: 222 173 (0xdead) -8531 (5700.5dBm) Frontend: f=1351.805 Status: 00: SNR: 222 173 (0xdead) (5700.5dB) BER: 0 0 0 0 (0x0) Signal: 222 173 (0xdead) -8531 (5700.5dBm) Frontend: f=1351.805 Status: 00: SNR: 222 173 (0xdead) (5700.5dB) BER: 0 0 0 0 (0x0) Signal: 222 173 (0xdead) -8531 (5700.5dBm) Frontend: f=1351.805 Status: 00: SNR: 222 173 (0xdead) (5700.5dB) BER: 0 0 0 0 (0x0) Signal: 222 173 (0xdead) -8531 (5700.5dBm) Frontend: f=1351.805 Another with +4mhz: Mythbox dvb # ./simpledvbtune -n 0 -f 11958 using '/dev/dvb/adapter0/frontend0' as frontend frontend fd=3: type=0 ioclt: FE_SET_VOLTAGE : 1 High band tone: 1 dvbfe setparams : delsys=1 1358MHz / Rate : 27500kBPS Status: 1e: Carrier Viterbi Sync Lock SNR: 0 33 (0x21) (3.3dB) BER: 0 0 0 0 (0x0) Signal: 0 193 (0xc1) 193 (19.3dBm) Frontend: f=1351.897 Status: 1e: Carrier Viterbi Sync Lock SNR: 0 33 (0x21) (3.3dB) BER: 0 0 0 0 (0x0) Signal: 0 195 (0xc3) 195 (19.5dBm) Frontend: f=1351.897 The strange part is that in the correct mhz version the frontend immediately locks but then looses this lock.This happens with other frequencies i tried as well. So considering that the tt-3200 users are having little tuning problems since the last changes , is the skystar hd hardware any different from the tt3200? Also, does anyone know the status of the driver's dev?Since all i see lately in the commits is some one liners plus the dev doesn't participate in the corresponding threads, the chances of fixing this don't seem very high.I'm thinking of trying my luck with another card (hvr4000)... _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
