I have Compro Videomate DVB T-100 card.
There are drivers for T200 and other Videomate cards in my current
kernel 2.6.25-gentoo-r7.
The card is using saa7134 chip with mt352 demodulator and qt1010 tuner.
I was able to modify some code to get T100 support.
Unfortunately I had to change some code common for all cards using
qt1010 tuner.
This will probably break other cards support.
I attach patch against my kernel source. Use at own risk this is my firs
patch.
There are some comments on changes on my personal pages
http://www.vlamat.wz.cz/index.php?t100
Vladimír Matěna
vlada.matena@xxxxxxxxx
diff -upr --exclude='*.o' --exclude='*.ko' --exclude='*.mod.c' --exclude='*.o.*' linux-2.6.25-gentoo-r7-unmodified/drivers/media/dvb/frontends/qt1010.c linux-2.6.25-gentoo-r7/drivers/media/dvb/frontends/qt1010.c
--- linux-2.6.25-gentoo-r7-unmodified/drivers/media/dvb/frontends/qt1010.c 2008-07-25 21:03:52.000000000 +0200
+++ linux-2.6.25-gentoo-r7/drivers/media/dvb/frontends/qt1010.c 2008-07-25 11:13:53.000000000 +0200
@@ -227,6 +227,9 @@ static int qt1010_set_params(struct dvb_
else tmpval = 0x05;
rd[41].val = (priv->reg20_init_val + 0x0d + tmpval);
+ rd[41].val = 0x39 + tmpval; // for Videomate DVB T-100
+ // FIXME two different calcualtion models on the lines above
+
/* 25 */
rd[43].val = priv->reg25_init_val;
diff -upr --exclude='*.o' --exclude='*.ko' --exclude='*.mod.c' --exclude='*.o.*' linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134-cards.c linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134-cards.c
--- linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134-cards.c 2008-07-25 21:03:52.000000000 +0200
+++ linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134-cards.c 2008-07-25 10:51:19.000000000 +0200
@@ -2331,6 +2331,24 @@ struct saa7134_board saa7134_boards[] =
.amux = LINE1,
}},
},
+ [SAA7134_BOARD_VIDEOMATE_DVBT_100] = {
+ .name = "Compro Videomate DVB-T100",
+ .tuner_type = TUNER_ABSENT,
+ .audio_clock = 0x00187de7,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ },
[SAA7134_BOARD_RTD_VFG7350] = {
.name = "RTD Embedded Technologies VFG7350",
.audio_clock = 0x00200000,
@@ -5066,6 +5084,7 @@ int saa7134_board_init1(struct saa7134_d
case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
+ case SAA7134_BOARD_VIDEOMATE_DVBT_100:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
@@ -5392,29 +5411,46 @@ int saa7134_board_init2(struct saa7134_d
dev->name, i);
}
break;
+ case SAA7134_BOARD_VIDEOMATE_DVBT_100:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
- /* The T200 and the T200A share the same pci id. Consequently,
+ /* The T100, T200 and the T200A share the same pci id. Consequently,
* we are going to query eeprom to try to find out which one we
* are actually looking at. */
/* Don't do this if the board was specifically selected with an
* insmod option or if we have the default configuration T200*/
- if(!dev->autodetected || (dev->eedata[0x41] == 0xd0))
+ if(!dev->autodetected)
+ {
+ printk(KERN_INFO "%s: Board type forced by insmod option. %s\n", dev->name, saa7134_boards[dev->board].name);
break;
- if(dev->eedata[0x41] == 0x02) {
- /* Reconfigure board as T200A */
- dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A;
- dev->tuner_type = saa7134_boards[dev->board].tuner_type;
- dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
- printk(KERN_INFO "%s: Reconfigured board as %s\n",
- dev->name, saa7134_boards[dev->board].name);
- } else {
- printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n",
- dev->name, dev->eedata[0x41]);
+ }
+
+ switch(dev->eedata[0x41])
+ {
+ case 0xd0:
+ printk(KERN_INFO "%s: Configured board as %s by eeprom data\n", dev->name, saa7134_boards[dev->board].name);
+ break;
+ case 0x02:
+ // Reconfigure board as T200A
+ dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A;
+ dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+ dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
+ printk(KERN_INFO "%s: Reconfigured board as %s by eeprom data\n", dev->name, saa7134_boards[dev->board].name);
+ break;
+ case 0xd5:
+ // Reconfigure board as T100
+ dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_100;
+ dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+ dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
+ printk(KERN_INFO "%s: Reconfigured board as %s by eeprom data\n", dev->name, saa7134_boards[dev->board].name);
+ break;
+
+ default:
+ printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n",dev->name, dev->eedata[0x41]);
break;
}
- break;
+ break;
}
saa7134_tuner_setup(dev);
return 0;
diff -upr --exclude='*.o' --exclude='*.ko' --exclude='*.mod.c' --exclude='*.o.*' linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134-dvb.c linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134-dvb.c
--- linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134-dvb.c 2008-07-25 21:03:52.000000000 +0200
+++ linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134-dvb.c 2008-07-25 11:05:22.000000000 +0200
@@ -39,6 +39,7 @@
#include "tda1004x.h"
#include "nxt200x.h"
+#include "qt1010.h"
#include "tda10086.h"
#include "tda826x.h"
#include "tda827x.h"
@@ -146,6 +147,25 @@ static int mt352_aver777_init(struct dvb
return 0;
}
+static int mt352_videomate_100_init(struct dvb_frontend* fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };//0x40 // 40-43 ,00, ff, 80 , 20
+ static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; // 0x28,0xa0
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x50 }; // 0x50
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(400);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+
+ return 0;
+}
+
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
@@ -188,6 +208,14 @@ static struct mt352_config avermedia_777
.demod_init = mt352_aver777_init,
};
+static struct mt352_config videomate_T100 = {
+ .demod_address = 0xf,
+ .adc_clock = 20480,
+ .if2 = 36166,
+ .no_tuner = 1,
+ .demod_init = mt352_videomate_100_init,
+};
+
/* ==================================================================
* tda1004x based DVB-T cards, helper functions
*/
@@ -309,6 +337,10 @@ static int philips_tu1216_init(struct dv
return 0;
}
+static struct qt1010_config videomate_t100_qt1010_config = {
+ .i2c_address = 0x62
+};
+
/* ------------------------------------------------------------------ */
static struct tda1004x_config philips_tu1216_60_config = {
@@ -937,6 +969,17 @@ static int dvb_init(struct saa7134_dev *
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
+ case SAA7134_BOARD_VIDEOMATE_DVBT_100:
+ dev->dvb.frontend = dvb_attach(mt352_attach, &videomate_T100, &dev->i2c_adap);
+ if (dev->dvb.frontend)
+ {
+ dvb_attach(qt1010_attach, dev->dvb.frontend, &dev->i2c_adap, &videomate_t100_qt1010_config);
+ }
+ else
+ {
+ printk(KERN_INFO "* * * dvb_attach for demodulator mt352 FAILED no frontend created\n");
+ }
+ break;
case SAA7134_BOARD_KWORLD_DVBT_210:
configure_tda827x_fe(dev, &kworld_dvb_t_210_config);
break;
diff -upr --exclude='*.o' --exclude='*.ko' --exclude='*.mod.c' --exclude='*.o.*' linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134.h linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134.h
--- linux-2.6.25-gentoo-r7-unmodified/drivers/media/video/saa7134/saa7134.h 2008-07-25 21:03:52.000000000 +0200
+++ linux-2.6.25-gentoo-r7/drivers/media/video/saa7134/saa7134.h 2008-07-25 10:32:21.000000000 +0200
@@ -254,6 +254,7 @@ struct saa7134_format {
#define SAA7134_BOARD_BEHOLD_M6 130
#define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131
#define SAA7134_BOARD_GENIUS_TVGO_A11MCE 132
+#define SAA7134_BOARD_VIDEOMATE_DVBT_100 150
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
