results of lsmod | grep dvb: dvb_usb_af9015 24332 0 dvb_usb 22924 1 dvb_usb_af9015dvb_core 80636 1 dvb_usbi2c_core 24832 4 mxl5005s,af9013,dvb_usb_af9015,dvb_usbusbcore 1460286 dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,ohci_hcd Thomas Am Samstag, den 19.07.2008, 10:58 +0200 schrieb tom:> Hi Antti,> I have installed the driver. After reboot dmesg gives the following.> > dmesg | grep dvb:> > [ 1387.281913] dvb-usb: MSI DIGIVOX Duo successfully deinitialized and> disconnected.> [ 1397.029836] dvb-usb: found a 'MSI DIGIVOX Duo' in cold state, will> try to load a firmware> [ 1397.062503] dvb-usb: downloading firmware from file> 'dvb-usb-af9015.fw'> [ 760.590855] dvb-usb: generic DVB-USB module successfully> deinitialized and disconnected.> [ 1397.796493] dvb-usb: found a 'MSI DIGIVOX Duo' in warm state.> [ 1397.796602] dvb-usb: will pass the complete MPEG2 transport stream to> the software demuxer.> [ 1398.548360] dvb-usb: will pass the complete MPEG2 transport stream to> the software demuxer.> [ 1399.517422] dvb-usb: MSI DIGIVOX Duo successfully initialized and> connected.> [ 1510.506232] dvb-usb: could not handle pid_parser> [ 1532.502328] dvb-usb: could not handle pid_parser> [ 1555.125203] dvb-usb: could not handle pid_parser> [ 1577.464244] dvb-usb: could not handle pid_parser> [ 1600.496149] dvb-usb: could not handle pid_parser> [ 1622.496391] dvb-usb: could not handle pid_parser> [ 2324.836824] dvb-usb: could not handle pid_parser> [ 2347.650720] dvb-usb: could not handle pid_parser> [ 2371.133792] dvb-usb: could not handle pid_parser> [ 2393.752616] dvb-usb: could not handle pid_parser> [ 2415.895728] dvb-usb: could not handle pid_parser> [ 2437.891824] dvb-usb: could not handle pid_parser> > A channel scan with Kaffeine was not successfull. Here the results:> > kbuildsycoca running...> Reusing existing ksycoca> /dev/dvb/adapter0/frontend0 : opened ( Afatech AF9013 DVB-T )> /dev/dvb/adapter1/frontend0 : opened ( Afatech AF9013 DVB-T )> 0 EPG plugins loaded for device 0:0.> 0 EPG plugins loaded for device 1:0.> Loaded epg data : 0 events (0 msecs)> kio (KMimeType): WARNING: KServiceType::offers : servicetype> ThumbCreator not found> kio (KMimeType): WARNING: KServiceType::offers : servicetype> ThumbCreator not found> tom@super-klappi:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : No such> file or directory> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 402000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 1/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 490000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 12/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 514000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 15/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 538000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 18/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 562000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 21/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 586000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 24/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 610000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 27/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 698000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 38/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 722000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 41/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 746000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 44/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 770000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 47/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 858000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> .FE_READ_STATUS: Remote I/O error> > Transponders: 58/63> > Invalid section length or timeout: pid=17> > Frontend closed> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Using DVB device 0:0 "Afatech AF9013 DVB-T"> tuning DVB-T to 882000000 Hz> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4> ERROR tuning > : Invalid argument> Frontend closed> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> openFe:: Device or resource busy> dvbsi: Cant tune DVB> Transponders: 63> dvbsi: The end :)> Channels found: 0> > Thomas> > > Am Freitag, den 18.07.2008, 23:49 +0300 schrieb Antti Palosaari:> > Antti Palosaari wrote:> > > tom wrote:> > >> Hello,> > >> since a few days I'm trying hard make this stick running. One basic problem is that I'm not able to find out which chipset is in this> > >> stick.> > >> I have tried af9015 driver and firmware, but it doesn't work.> > > > > > It looks like AF9015 dual design. I think problem you have is missing > > > device USB-IDs. I will add those in a next few hours and you can test > > > then again.> > > > Now it is ready for the test.> > http://linuxtv.org/hg/~anttip/af9015/> > > > Antti _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
