i have installed dishes before and the usual mechanism is to stick a little portable meter onto the lnb and try to align the dish. for the final finetune, i usually connect to a receiver with some sort of signal strength meter and have that relayed to me as i perch up on top of a ladder. all in all rather unsatisfactory. i was wondering if anyone on this list knows of any tools to help set it up? i had in mind an app using linux-dvb and a usb dvb-s (or dvb-t for that matter) receiver which would provide information about: signal strength noise level even some indictation of sat being pointed to by trying to tune to an expected transponder and decoding the information of course you could extend it from there to include coverage maps and setup information (angles etc.) it would need a very "chunky" interface so that you could see it from the top of a ladder while the laptop is on the ground. any thoughts? -- simon _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
