Am Montag, den 14.07.2008, 12:40 +0100 schrieb Simon Arlott: > On Mon, July 14, 2008 03:48, hermann pitton wrote: > > > > Am Sonntag, den 13.07.2008, 19:32 +0100 schrieb Simon Arlott: > >> >From cde790c56ffe76f3d0bf6f38d89f4e671a5218c6 Mon Sep 17 00:00:00 2001 > >> From: Simon Arlott <simon@xxxxxxxxxxxxxx> > >> Date: Sun, 13 Jul 2008 19:24:53 +0100 > >> Subject: [PATCH] V4L: Link tuner before saa7134 > >> > >> If saa7134_init is run before v4l2_i2c_drv_init (tuner), > >> then saa7134_board_init2 will try to set the tuner type > >> for devices that don't exist yet. This moves tuner to > >> before all of the device-specific drivers so that it's > >> loaded early enough on boot. > >> > >> Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx> > >> --- > >> drivers/media/video/Makefile | 4 ++-- > >> 1 files changed, 2 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile > >> index ecbbfaa..6b0af12 100644 > >> --- a/drivers/media/video/Makefile > >> +++ b/drivers/media/video/Makefile > >> @@ -18,6 +18,8 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y) > >> obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o > >> endif > >> > >> +obj-$(CONFIG_VIDEO_TUNER) += tuner.o > >> + > >> obj-$(CONFIG_VIDEO_BT848) += bt8xx/ > >> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o > >> obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o > >> @@ -84,8 +86,6 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o > >> obj-$(CONFIG_VIDEO_DPC) += dpc7146.o > >> obj-$(CONFIG_TUNER_3036) += tuner-3036.o > >> > >> -obj-$(CONFIG_VIDEO_TUNER) += tuner.o > >> - > >> obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o > >> obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o > >> obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o > >> -- > >> 1.5.6.2 > >> > > > > Thanks a lot for working on it! > > > > I must admit that I have not tested it yet. > > > > Remaining issues are. > > > > #1 users can't set the tuner type anymore, > > but the few cases of tuner detection from eeprom we have should > > work again for that price. > There are already module parameters to do that... they can be used > from the kernel command line too. They are broken for what I do say during the last three months and a build just now tells the same. > > > > #2 We still don't have any sufficient HDTV support in the kernel ;) > > > DVB-T2? Why is that relevant to this change? My card doesn't even support > it. Sorry for abusing the thread a little, I plan some vacations and try to dump what I have left in mind. Your card should at least support Australian DVB-T HDTV. We have some new support for DVB-S in 2.6.26, mostly triple or quad capable cards, using the dual isl6405 as LNB supply. I would love to see more feedback here for HDTV usage. (not S2, but for example BBC HD 1080i, works flawlessly somewhere else ...) > > #0 On 2.6.25, without dedicated TV subnorm selection possible anymore > > and known auto detection flaws, fixed now, folks should have > > complained about it. > > > > Interestingly nothing like that happened. > > > > What could that mean? > > > I'm not sure what you're asking, but not many people appear to compile > v4l/dvb into the kernel. Lots of function calls still work on > uninitialised modules so ordering problems can easily be missed. > We have much less testers than previously I believe. The tda827x still seems not to compile, if tuner customization is not selected. Likely the isl6405 under frontend customization needs to be checked too. Thanks again. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
