Yo! Now it's ok. Follow these steps. Get a new kernel soruce from kernel.org, recompile it *WITHOUT* any devices like V4L or DVD. Reboot the machine, install dvb from mercurial. modprobe cx23885 and dmesg says: CORE cx23885[0]: subsystem: 0070:71d1, board: Hauppauge WinTV-HVR1200 [card=7,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered tveeprom 1-0050: Hauppauge model 71999, rev J1E9, serial# 3545326 tveeprom 1-0050: MAC address is 00-0D-FE-36-18-EE tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 1-0050: audio processor is CX23885 (idx 39) tveeprom 1-0050: decoder processor is CX23885B (idx 41) tveeprom 1-0050: has no radio, has no IR receiver, has no IR transmitter cx23885[0]: hauppauge eeprom: model=71999 cx23885[0]: cx23885 based dvb card tda829x 2-0042: type set to tda8295 tda18271 2-0060: creating new instance TDA18271HD/C1 detected @ 2-0060 DVB: registering new adapter (cx23885[0]) DVB: registering frontend 0 (NXP TDA10048HN DVB-T)... cx23885_dev_checkrevision() Hardware revision = 0xb0 cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xf9c00000 PCI: Setting latency timer of device 0000:03:00.0 to 64 The modules loads fine. Now I can't try the card with some software because I'm remotely connected, but later I'll trying. Thanks to all, in particoular "sn9" from #linuxtv Regards. Fabrizio 2008/6/30 Fabrizio Regalli <fabreg@xxxxxxxxx>: > Ok, I've installed the cvs version of driver. > > Now I've another problem loading of cx23885 module: > > WARNING: Error inserting videobuf_core > (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-core.ko): > Invalid argument > WARNING: Error inserting dvb_core > (/lib/modules/2.6.25.9/kernel/drivers/media/dvb/dvb-core/dvb-core.ko): > Invalid argument > WARNING: Error inserting videobuf_dvb > (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dvb.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > WARNING: Error inserting videobuf_dma_sg > (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dma-sg.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > WARNING: Error inserting compat_ioctl32 > (/lib/modules/2.6.25.9/kernel/drivers/media/video/compat_ioctl32.ko): > Invalid module format > WARNING: Error inserting v4l1_compat > (/lib/modules/2.6.25.9/kernel/drivers/media/video/v4l1-compat.ko): > Invalid argument > WARNING: Error inserting videodev > (/lib/modules/2.6.25.9/kernel/drivers/media/video/videodev.ko): > Invalid module format > FATAL: Error inserting cx23885 > (/lib/modules/2.6.25.9/kernel/drivers/media/video/cx23885/cx23885.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > > Maybe I must disable the kernel native module before compile this new one? > > Thanks. > Fab > > 2008/6/29 Michael Krufky <mkrufky@xxxxxxxxxxx>: >> 2008/6/29 Michael Krufky <mkrufky@xxxxxxxxxxx>: >>>> Fabrizio Regalli wrote: >>>> >>>>> Hello. >>>>> >>>>> I've the follow tv card on my linux box: >>>>> >>>>> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02) >>>>> Subsystem: Hauppauge computer works Inc. Device 71d1 >>>>> >>>> [snip] >>>> >>>>> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works. >>>>> Could someone please help me? >>>>> >>>> Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel. >>>> >>>> Regards, >>>> >>>> Mike >>>> >>>> >> >> Fabrizio Regalli wrote: >>> Hi Michael >>> >>> thanks for your reply. >>> Which extacly are the files needed? Maybe >>> >>> http://linuxtv.org/downloads/linuxtv-dvb-1.1.1.tar.bz2 >>> >>> and >>> >>> http://linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2 >>> >>> Thanks again. >>> Fab >>> >> >> Follow these instructions: >> >> http://linuxtv.org/repo/#mercurial >> >> Good luck! >> >> -Mike >> >> >> > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
