On Mon, Jun 23, 2008 at 11:37:37PM +0300, Anssi Kolehmainen wrote: > I have Terratec Cinergy PCI DVB-C (1822:4e35) with CI addon card. Card > works fine with latest mantis drivers from http://jusst.de/hg/mantis > (tip, 7348:0b04be0c088a). Problems start when I plug in Conax CAM and > load mantis module. Sometimes it just hangs the computer and when it > works it cannot tune to channels. > > Getting good logs is a bit hard since mantis with verbose=3 hangs > machine when loading module. > > Any ideas how to debug/fix this? Why en50221 (?) breaks i2c for > frontend? After long evening of hacking and testing it seems that reading or writing from the CAM breaks things. mantis_hif_read_mem() (and others) seem to be the problematic functions. If I remove calls to those functions in mantis_ca.c then CAM initialization naturally fails but card continues to work. Does anybody have mantis docs where those hif-functions (or rather the GPIF writes/reads) are described? -- Anssi Kolehmainen anssi.kolehmainen@xxxxxx 040-5085390 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
