Hi, I've just compiled the last cvs branch of af9015. But when I plug the dongle I've this: [ 3588.095563] usb 4-6: new high speed USB device using ehci_hcd and address 11 [ 3588.232504] usb 4-6: configuration #1 chosen from 1 choice [ 3588.232950] af9015_usb_probe: interface:0 [ 3588.234439] af9015_read_config: IR mode:1 [ 3588.235928] af9015_read_config: TS mode:0 [ 3588.239558] af9015_read_config: [0] xtal:2 set adc_clock:28000 [ 3588.247095] af9015_read_config: [0] IF1:4300 [ 3588.250881] af9015_read_config: [0] MT2060 IF1:0 [ 3588.253348] af9015_read_config: [0] tuner id:156 [ 3588.253907] af9015_identify_state: reply:02 [ 3588.253912] dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state. [ 3588.254034] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 3588.254370] DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold) [ 3588.254844] af9015_af9013_frontend_attach: init I2C [ 3588.254847] af9015_i2c_init: [ 3588.254871] af9015_eeprom_dump: [ 3588.278762] 00: 31 c2 bb 0b 00 00 00 00 13 04 29 60 00 02 01 02 [ 3588.313482] 10: 00 80 00 fa fa 10 40 ef 01 30 31 30 31 30 32 30 [ 3588.345396] 20: 35 30 35 30 30 30 30 31 ff ff ff ff ff ff ff ff [ 3588.369301] 30: 00 00 3a 01 00 08 02 00 cc 10 00 00 9c ff ff ff [ 3588.399095] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff [ 3588.427625] 50: ff ff ff ff ff 26 00 00 04 03 09 04 10 03 4c 00 [ 3588.454093] 60: 65 00 61 00 64 00 74 00 65 00 6b 00 30 03 57 00 [ 3588.490556] 70: 69 00 6e 00 46 00 61 00 73 00 74 00 20 00 44 00 [ 3588.518653] 80: 54 00 56 00 20 00 44 00 6f 00 6e 00 67 00 6c 00 [ 3588.542630] 90: 65 00 20 00 47 00 6f 00 6c 00 64 00 20 03 30 00 [ 3588.569231] a0: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00 [ 3588.593207] b0: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff [ 3588.617210] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3588.641163] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3588.665138] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3588.689117] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3588.752816] af9013: Unknown symbol __floatsidf [ 3588.752888] af9013: Unknown symbol __adddf3 [ 3588.752960] af9013: Unknown symbol __fixdfsi [ 3588.753025] af9013: Unknown symbol __divdf3 [ 3588.753089] af9013: Unknown symbol __muldf3 [ 3588.795881] DVB: Unable to find symbol af9013_attach() [ 3588.795896] dvb-usb: no frontend was attached by 'Leadtek WinFast DTV Dongle Gold' [ 3588.796034] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.3/usb4/4-6/input/input19 [ 3588.822739] dvb-usb: schedule remote query interval to 150 msecs. [ 3588.822754] dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and connected. [ 3588.822759] af9015_init: [ 3588.822762] af9015_init_endpoint: USB speed:3 [ 3588.834106] af9015_download_ir_table: [ 3588.915044] input: Leadtek WinFast DTV Dongle Gold as /devices/pci0000:00/0000:00:10.3/usb4/4-6/4-6:1.1/input/input20 I don't know why I've the "af9013: Unknow symbol" I'm using a 2.6.24-19 kernel on a ubuntu 8.04. Maybe the issue is related to this kernel ? Is anybody can help me ? Thanks _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
