> I would try to fix the Firmware error. U prolly need to copy the firmware > into the firmware dir for the newest kernel. Check what it does if u be able > to make the driver load the firmware correctly. Hi, sorry it took so long to answer as I was away from computer. I installed the v4l-cx2341x-enc.fw from ivtv-firmware rpm and the firmware load warning went away. DVB is however still not working with 2.6.24, 26.25 and 2.6.26-rc4 kernels I have tested. But will work if I build and load v4l-dvb drivers. cx88/dvb related dmesg output looks ok for me and I have things created under /dev/dvb... cx2388x alsa driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:03:06.1[A] -> GSI 20 (level, low) -> IRQ 20 cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected] cx88[0]: TV tuner type 63, Radio tuner type -1 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88/0: cx2388x v4l2 driver version 0.0.6 loaded tuner' 1-0061: chip found @ 0xc2 (cx88[0]) tuner' 1-0063: chip found @ 0xc6 (cx88[0]) tveeprom 1-0050: Hauppauge model 96019, rev C6A0, serial# 1230818 tveeprom 1-0050: MAC address is 00-0D-FE-12-C7-E2 tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 1-0050: audio processor is CX882 (idx 33) tveeprom 1-0050: decoder processor is CX882 (idx 25) tveeprom 1-0050: has radio, has IR receiver, has IR transmitter cx88[0]: hauppauge eeprom: model=96019 tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) cx88[0]/1: CX88x/0: ALSA support for cx2388x boards ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 20 (level, low) -> IRQ 20 cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xfa000000 wm8775' 1-001b: chip found @ 0x36 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:03:06.2[A] -> GSI 20 (level, low) -> IRQ 20 cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfb000000 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx2388x based DVB/ATSC card tuner-simple 1-0061: attaching existing instance tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX22702 DVB-T)... cx2388x blackbird driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: blackbird access: shared cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted firmware: requesting v4l-cx2341x-enc.fw cx88[0]/2-bb: Firmware upload successful. cx88[0]/2-bb: Firmware version is 0x02060039 cx88[0]/2: registered device video1 [mpeg] _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
