Francesco ha scritto: > Hi, > I've a problem with new version of MyCinema 7131H, one with NXP chip > (saa7131E, tda10046A). > > On boot, system fail to load firmware for tda10046, showing a wrong > firmware revision number (normally 80, but sometimes other numbers). > > If I reboot (not shutdown & power up!), or if I unload all saa7134* > modules from memory and reload saa7134-dvb, firmware is loaded correctly > with revision 20... > > Note: I never had this problem with old Philips-brand Asus P7131H. > > > thanks in advance, > Francesco Ferrario > > IT Manager Chimera project > www.chimeratv.it After reading "unstable tda1004x firmware loading", I've found a little workaround (not a solution, but...) for this problem... Simply adding "saa7134-dvb" to /etc/modules, make a successful firmware loading on boot. (My system is an Ubuntu 7.10) Francesco Ferrario - Chimera project - - www.chimeratv.it - _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
