Hi all, I've been a bit absent from this list recently and just checked the changes regarding v4l and dvb support of my HVR 1300 card. Actually I am a bit astonished that nothing really changed compared to a few months ago. Please don't get me wrong, I absolutely don't want to offend anybody here - I really appreciate all the great work you are doing, but there is a few questions regarding HVR 1300 that come to my mind: 1. Why are the patches from http://linuxtv.org/hg/~rmcc/hvr-1300/ not included in the mainline? For me they enable usage of the HW MPEG encoder with MythTV and don't seem to introduce any problems. 2. I can't get DVB-T to work. All the modules load fine, scanning for channels fails, no channel can be tuned - no stations found. I tried to use dvbsnoop, only visible effect is the following line repeated in kernel log: cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000003) I think this has been reported earlier on this list. 3. The analog part of the card works only with some workaround in rc.sysinit: I have to unload all cx88 modules and reload them in order to get the analog tuner working. This has also been discussed on this list earlier. By googling I've read from various sources that the order of module loading makes a difference... As mentioned above, this is not meant to be critics on your work, I'd just like to (re)-initiate some discussion on these topics and offer my help in debugging/testing of patches. Thanks everybody! Regards, Jan -- Jan Frey linux [at] janfrey.de _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
