Hello thanks very much for your fast response! Am Freitag, den 06.06.2008, 11:20 +0200 schrieb Dennis Noordsij: [...] > You're in luck :-) That device works very well. *w00h00* sounds good :) > The driver is not in the official tree (yet) so if you would like to use > it you will need to compile it yourself, [...] > You will also need to take the firmware file "SMS100x_Dvbt.inp" (from > the installation CD or windows, or download the drivers from > terratec.net) and copy it to your \lib\firmware or \lib\firmware\`uname > -r` as "dvbt_stellar_usb.inp". > > I hope those instructions make sense :-) thank you very much four your explanation. This is what I get: [root@oipunk:/lib/firmware]# uname -a Linux oipunk 2.6.25.4-paldo1-x86 #1 SMP PREEMPT Fri May 16 14:52:58 CEST 2008 i686 GNU/Linux [root@oipunk:/lib/firmware]# lsmod | grep sms1xxx sms1xxx 25560 0 dvb_core 80512 1 sms1xxx firmware_class 10496 4 sms1xxx,microcode,iwl3945,pcmcia [root@oipunk:/lib/firmware]# modinfo sms1xxx filename: /lib/modules/2.6.25.4-paldo1-x86/kernel/drivers/media/dvb/siano/sms1xxx.ko license: GPL author: Anatoly Greenblatt,,, (anatolyg@xxxxxxxxxxxx) description: smscore alias: usb:v187Fp0200d*dc*dsc*dp*ic*isc*ip* alias: usb:v187Fp0100d*dc*dsc*dp*ic*isc*ip* alias: usb:v187Fp0010d*dc*dsc*dp*ic*isc*ip* depends: dvb-core,firmware_class vermagic: 2.6.25.4-paldo1-x86 SMP preempt mod_unload PENTIUMIII parm: adapter_nr:DVB adapter numbers (array of short) parm: default_mode:default firmware id (device mode) (int) [root@oipunk:/lib/firmware]# ls -la *.inp -r-xr-xr-x 1 root root 40324 2008-06-06 14:34 dvbh_stellar_usb.inp -r-xr-xr-x 1 root root 38144 2008-06-06 14:28 dvbt_stellar_usb.inp [root@oipunk:/var/log]# dmesg [...] usb 3-1: new full speed USB device using uhci_hcd and address 43 usb 3-1: configuration #1 chosen from 1 choice smsusb_probe 0 endpoint 0 81 02 64 endpoint 1 02 02 64 smscore_register_device allocated 50 buffers smscore_register_device device ed48cf00 created smsusb1_detectmode: 1 "SMS DVBH Receiver" smscore_onresponse no client (00000000) or error (-16), type:698 dstid:0 DVB: registering new adapter (Siano Digital Receiver) DVB: registering frontend 0 (Siano Mobile Digital SMS10xx)... smscore_register_client f6972800 693 0 smsdvb_hotplug success smscore_start_device device ed48cf00 started, rc 0 smsusb_init_device device f6973000 created usb 3-1: New USB device found, idVendor=187f, idProduct=0100 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SMS DVBH Receiver usb 3-1: Manufacturer: Siano Mobile Silicon smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes smsusb_onresponse error, urb status -84, 0 bytes usb 3-1: USB disconnect, address 43 smscore_unregister_client f6972800 693 smscore_unregister_device freed 50 buffers smscore_unregister_device device ed48cf00 destroyed smsusb_term_device device f6973000 destroyed Unfortunately I do not get a device within /dev Am I doing something wrong? Or is there just something missing in my installation? I would very much appreciate any help. kind regards Nicolas _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
