Greetings! I have problems finding a couple of channels at a specific frequency (538000MHz). I can find these channels with my set-top box and also with a different DVB-C card so they must be there. Under Windows XP I have the same problem with this card and the software there gives the failure message "PTA Table incomplete". $ lspci -v [...] 00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: KNC One Unknown device 0021 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at fb022000 (32-bit, non-prefetchable) [size=512] $ dmesg | grep -i dvb [ 27.962301] DVB: registering new adapter (KNC1 DVB-C Plus) [ 28.530779] DVB: registering frontend 0 (Philips TDA10021 DVB-C)... $ scan tuningdata > channels.conf [...] >>> tune to: 538000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64 WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
