Can anyone help me please to resolve a problem on a card with cx88 chipset and tuner xc2028? The picture is perfect but the sound signal is completely distorted (still there is a weak hint of the original sound). I loaded the firmware xc3028-v27.fw as explained in a few places including v4l-dvb docs and wiki. Then I tried Conexant based xc3028 firmwares and Powerangel firmwares from http://mcentral.de/firmware/, and both produced the same noisy sound. The dmesg output is below. The card is recognised as PowerColor Real Angel, although I've got mine rebranded under the name Techgear Classic TV Pro. tuner' 1-0061: chip found @ 0xc2 (cx88[0]) xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner cx88[0]: Asking xc2028/3028 to load firmware xc3028-v25.fw input: cx88 IR (PowerColor Real Angel as /class/input/input3 cx88[0]/0: found at 0000:00:10.0, rev: 5, irq: 10, latency: 66, mmio: 0x43000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88 IR (PowerColor Real Angel : unknown key: key=0x3f raw=0x3f down=1 cx88 IR (PowerColor Real Angel : unknown key: key=0x3f raw=0x3f down=0 xc2028 1-0061: Loading 80 firmware images from xc3028-v25.fw, type: xc2028 firmware, ver 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. SCODE (20000000), id 000000000000b700: xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. cx88[0]: Calling XC2028/3028 callback ... cx88[0]: Calling XC2028/3028 callback xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 1-0061: Loading firmware for type=(0), id 0000001000400000. SCODE (20000000), id 0000001000400000: xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6000 (60008000), id 0000000c04c000f0. cx88[0]: Calling XC2028/3028 callback ... cx88[0]: video y / packed - dma channel status dump cx88[0]: cmds: initial risc: 0x07f5c000 cx88[0]: cmds: cdt base : 0x00180440 cx88[0]: cmds: cdt size : 0x0000000c cx88[0]: cmds: iq base : 0x00180400 cx88[0]: cmds: iq size : 0x00000010 cx88[0]: cmds: risc pc : 0x07f5c998 cx88[0]: cmds: iq wr ptr : 0x00000106 cx88[0]: cmds: iq rd ptr : 0x0000010a cx88[0]: cmds: cdt current : 0x00000488 cx88[0]: cmds: pci target : 0x07f56b00 cx88[0]: cmds: line / byte : 0x00f00000 cx88[0]: risc0: 0x80008200 [ sync resync count=512 ] cx88[0]: risc1: 0x1c000500 [ write sol eol count=1280 ] cx88[0]: risc2: 0x07e89500 [ arg #1 ] cx88[0]: risc3: 0x18000100 [ write sol count=256 ] cx88[0]: iq 0: 0x1c000500 [ write sol eol count=1280 ] cx88[0]: iq 1: 0x07e8a900 [ arg #1 ] cx88[0]: iq 2: 0x1c000500 [ write sol eol count=1280 ] cx88[0]: iq 3: 0x07e8b300 [ arg #1 ] ... cx88[0]: iq 4: 0x18000300 [ write sol count=768 ] cx88[0]: iq 5: 0x07e8bd00 [ arg #1 ] cx88[0]: iq 6: 0x07f56000 [ INVALID eol irq2 irq1 23 22 21 20 18 cnt0 14 13 count=0 ] cx88[0]: iq 7: 0x1c000500 [ write sol eol count=1280 ] cx88[0]: iq 8: 0x07f56600 [ arg #1 ] cx88[0]: iq 9: 0x80008200 [ sync resync count=512 ] cx88[0]: iq a: 0x1c000500 [ write sol eol count=1280 ] cx88[0]: iq b: 0x07e89500 [ arg #1 ] cx88[0]: iq c: 0x18000100 [ write sol count=256 ] cx88[0]: iq d: 0x07e89f00 [ arg #1 ] cx88[0]: iq e: 0x14000400 [ write eol count=1024 ] cx88[0]: iq f: 0x07e8a000 [ arg #1 ] cx88[0]: fifo: 0x00180c00 -> 0x183400 cx88[0]: ctrl: 0x00180400 -> 0x180460 cx88[0]: ptr1_reg: 0x00181ce0 cx88[0]: ptr2_reg: 0x00180478 cx88[0]: cnt1_reg: 0x0000006b cx88[0]: cnt2_reg: 0x00000000 cx88[0]/0: [ce75c5c0/0] timeout - dma=0x07f5c000 cx88[0]/0: [ce75cbc0/1] timeout - dma=0x07ff4000 cx88[0]: Calling XC2028/3028 callback ... -- Vladimir _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
