On 20.05.2008 08:16, Pauli Borodulin wrote: >> On 19.05.2008 20:51, Pauli Borodulin wrote: > >> [...] >>> What comes to auto-repeat... With your version of the patch it works >>> equally well/badly on 2033 as it did with the earlier version. > > Roland Scheidegger wrote: >> Just curious, what's the native repeat rate (what it prints out with >> verbose set time between irqs) with this card? > > Initial delay ~270ms and repeats ~220ms. Ah so exactly the same as for my remote. Interesting... > > Btw I found these in dvb-usb-remote.c: > > input_dev->rep[REP_PERIOD] = d->props.rc_interval; > input_dev->rep[REP_DELAY] = d->props.rc_interval + 150; > > So there seems to be some configurable auto-repeat functionality in > input layer. I guess I'll experiment with those even tho' RCs delays are > a bit crappy, since it's a pretty painful to go through a long list of > recordings without any auto-repeat... If you change these values (to anything but zero) before input_register_device, the input driver will just disable auto-repeat (or rather, you'd need to handle it yourself in the driver with the appropriate timer func, and I didn't feel like duplicating half the code of the input driver). input_register_device also says all capabilities must be set up before calling it, when I tried to change those values afterwards it didn't seem to work (though maybe I made some testing error, I can't see why it shouldn't work). I guess a REP_DELAY a bit over the initial delay (like 300ms) should work, and a REP_PERIOD of about 100 (which would give you about 50% chance of stopping pressing keys exactly) might be reasonable - though it really is annoying if you can't stop exactly (but it's not solvable - either live with slow repeat or live with that). Roland _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
