On 20/05/2008, Owen Townend <owen.townend@xxxxxxxxx> wrote: > On 20/05/2008, Antti Palosaari <crope@xxxxxx> wrote: > > Owen Townend wrote: > > > > > So two questions: > > > What can I do to enable the second tuner on the dongle? > > > How can I compile the cx88 drivers along with the rest in the af9015 > > checkout? > > > > > > > > > > [4] http://linuxtv.org/hg/~anttip/af9015/rev/22fc34924b9e > > > > > > > You should use newer tree: > > http://linuxtv.org/hg/~anttip/af9015-mxl500x-copy-fw/ > > I have feeling that both tuners should work (if I have not broken > > something)... > > > > regards > > Antti > > > Hey, > Thanks for the reply. > I've rebuilt from the suggested tree and this does indeed give me > access to both tuners on the USB stick. Thankyou for the ongoing work! > Unfortunately the cx88 drivers are still not being compiled along > with the rest. Any suggestions? > Quick followup: I had checked access to the dual tuners by listing /dev/dvb and seeing two adapters. Both tuners are indeed useable in mythtv, but the output is artifacted and jittery. The output when I only had access to the single usb tuner was smooth. The hardware should be more than adaquate (4GB RAM + phenom 9600 on 480G chipset) so it shouldn't be that. This leaves me with the driver or firmware. What firmware should I be using? Is the generic firmware I have[1] sufficient or should I try to use a file from the windows driver disk? cheers, Owen. [1] Firmware from: http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
