Hi,
You should maybe try the patches that Matthias Schwarzott made for non-hybrid variant of the A700 card (the one I use). They implement the add DVB-S support for that card, and it's running fine now for me. don't know if these patches might be also valid for the Hybrid version, but it's probably worth the try.
You can find the patches in the Avermedia A700 wiki page of LinuxTV, here:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29
Take the lastest full diff file from ZZam's repository and apply it over the current HG tree. If you are unsure about how to proceed, myou should first take a look at the howto page regarding LinuxTV drivers install:
http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
Good luck :D
Eduard Huguet
You should maybe try the patches that Matthias Schwarzott made for non-hybrid variant of the A700 card (the one I use). They implement the add DVB-S support for that card, and it's running fine now for me. don't know if these patches might be also valid for the Hybrid version, but it's probably worth the try.
You can find the patches in the Avermedia A700 wiki page of LinuxTV, here:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_%28A700%29
Take the lastest full diff file from ZZam's repository and apply it over the current HG tree. If you are unsure about how to proceed, myou should first take a look at the howto page regarding LinuxTV drivers install:
http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
Good luck :D
Eduard Huguet
---------- Missatge reenviat ----------
From: bvidinli <bvidinli@xxxxxxxxx>
To: linux-dvb@xxxxxxxxxxx, "fahri donmez" <fahridon@xxxxxxxxx>, ozbilen@xxxxxxxxx
Date: Sat, 17 May 2008 13:16:14 +0300
Subject: [linux-dvb] merhaba: About Avermedia DVB-S Hybrid+FM A700
i just compiled kernel version 2.6.26.rc2 on my ubuntu linux 8.04,
many things including sound not working, but i got finally name of my
tv/dvb card on dmesg output.
previously i was getting UNKNOWN/GENERIC on dmesg for my tv card,
i use tvtime-scanner or tvtime, it does not scan, even analog channels,
i use following to try new tuners, :
rmmod saa7134
modprobe saa7134 card=141 tuner=2
i run these two lines fo rtuner 0,1,2,3 and so on... to try different
tuner numbers... on some numbers, computers locks down.. i had to
reset...
currently i have two questions:
1- what is correct statements/commands to be able to scan tv channels...
2- the log says only analog inputs available now, when it will be
possible to watch dvb channels ?
3- what is best/good tutorials/sites that describe/help in
dvb/tv/multimedia for ubuntu/linux, (i already looked linuxtv,
searched google, many sites..)
thanks.
logs: dmesg,
[ 39.243703] saa7133[0]: found at 0000:00:14.0, rev: 209, irq: 12,
latency: 32, mmio: 0xde003000
[ 39.243776] saa7133[0]: subsystem: 1461:a7a2, board: Avermedia
DVB-S Hybrid+FM A700 [card=141,autodetected]
[ 39.243858] saa7133[0]: board init: gpio is b400
[ 39.243909] saa7133[0]: Avermedia DVB-S Hybrid+FM A700: hybrid
analog/dvb card
[ 39.243915] saa7133[0]: Sorry, only the analog inputs are supported for now.
--
İ.Bahattin Vidinli
Elk-Elektronik Müh.
-------------------
iletisim bilgileri (Tercih sirasina gore):
skype: bvidinli (sesli gorusme icin, www.skype.com)
msn: bvidinli@xxxxxxxxxxxxx
yahoo: bvidinli
+90.532.7990607
+90.505.5667711
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
