Re: KNC TV Station DVR Tuner Sound Issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hermann pitton a écrit :
> Hi Frederic,
> 
> Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
>> Dear all,
>>
>> I recently had to change v4l drivers to support my WinTV HVR 1300.
>> I have issues making my HVR work but that's not the point here.
>> My problem is that since I updated kernel + drivers, I can't manage to 
>> make sound work when I'm using the tuner input. Sound jack input works 
>> when I'm using SVideo or Composite Video, but not when I'm using tuner.
>>
>> Here are the options I'm using
>> tuner : port2=0
>> saa7134: oss=1 disable_ir=1
>> saa7134-oss: rate=48000
> 
> the rate=48000 is only valid for external analog input and disables
> sound from tuner. Have a look at the saa7134-oss mixer under such
> conditions.
> 
> You must use default rate of 32000 for dma sound from tuner.
> 
> The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
> 
> If you are considering using recent v4l-dvb mercurial stuff, which
> should be best for the HVR1300 and reporting bugs on saa7134-empress,
> you might still have your old saa7134-oss module around and some others
> like the old video_buf now loaded, since not deleted on upgrade.
> 
> After make rmmod and rminstall with current v4l-dvb you should delete
> such remaining modules on older kernels too before make install.
> 
> Cheers,
> Hermann

hum I used to set rate to 48000 with my old 2005 july snapshot and it 
was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner 
but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except from config_snd ?
about old modules still loaded this can't be since I build my system 
from scratch each time i try a new kernel / driver into an ext2 file, 
which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not 
using my old v4l snapshot, but the 2.6.22.19 v4l drivers

I'll let you know if I can make it work

-- 
CAND Frederic
Product Manager
ANEVIA

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux