Re: a700 support (was: [patch 5/5] mt312: add attach-time setting to invert lnb-voltage (Matthias Schwarzott))

["Eduard Huguet" <eduardhc@xxxxxxxxx>]

Well, still no luck. I'm unable to discover any channel from Astra 19.2 neither from dvbscan nor Kaffeine. For the sake of any possible diagnostics, here you have the dmesg output for the "modprobe saa7134 i2c_scan=1" command:

[40824.395017] Linux video capture interface: v2.00
[40824.427006] saa7130/34: v4l2 driver version 0.2.14 loaded
[40824.428056] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 23, latency: 64, mmio: 0xf7ffa800
[40824.428097] saa7133[0]: subsystem: 1461:a7a1, board: Avermedia DVB-S Pro A700 [card=140,autodetected]
[40824.428151] saa7133[0]: board init: gpio is 6f300
[40824.564594] saa7133[0]: i2c eeprom 00: 61 14 a1 a7 ff ff ff ff ff ff ff ff ff ff ff ff
[40824.564680] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.564741] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.564882] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565080] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565128] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565173] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565226] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565277] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565325] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565374] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565418] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565463] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565507] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.565578] saa7133[0]: i2c eeprom e0: 00 01 81 af ea b5 ff ff ff ff ff ff ff ff ff ff
[40824.565630] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[40824.572529] saa7133[0]: i2c scan: found device @ 0x1c  [???]
[40824.588514] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[40824.619181] saa7133[0]: registered device video0 [v4l2]
[40824.620182] saa7133[0]: registered device vbi0
[40824.745393] mt312: R(126): 05
[40824.785660] mt312: R(20): 03
[40824.785694] mt312: W(20): 40
[40824.806192] mt312: R(20): 43
[40824.806227] mt312: W(20): 00
[40824.808187] zl10036_attach: tuner initialization (Zarlink ZL10036 addr=0x60) ok
[40824.808213] DVB: registering new adapter (saa7133[0])
[40824.808232] DVB: registering frontend 0 (Zarlink ZL10313 DVB-S)...
[40824.809840] mt312: W(127): 8c
[40824.812347] mt312: W(21): 80
[40824.814217] mt312: W(86): 14 12 03 02 01 00 00 00
[40824.817178] mt312: W(20): 80
[40824.819187] mt312: W(84): 80 b0
[40824.823540] mt312: W(84): 00
[40824.825158] mt312: W(85): 00
[40824.827162] mt312: W(34): b6 73
[40824.829161] mt312: W(49): 32
[40824.831146] mt312: W(96): 33
[40824.834197] mt312: W(51): 8c 98
[40824.836583] mt312: W(57): 69
[40824.838884] mt312: W(21): 80
[40824.841869] mt312: W(20): 00
[40824.844860] mt312: W(84): 0d
[40824.851210] mt312: R(127): 8c
[40824.851262] mt312: W(127): 0c
[40824.856840] mt312: R(20): 03
[40824.856884] mt312: W(20): 40
[40824.868466] mt312: R(20): 43

I have also "debug=1" for mt312 module, as you might see. I don't know if this can be also helpful, but this is the dmesg output when scanning channels from within Kaffeine:

[41068.542974] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.547076] mt312: R(4): 10 8a 30
[41068.547118] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.547138] mt312: mt312_set_frontend: Freq 1951000
[41068.549810] mt312: R(20): 83
[41068.549839] mt312: W(20): c0
[41068.568762] mt312: R(20): c3
[41068.568786] mt312: W(20): 80
[41068.574794] mt312: R(20): 87
[41068.574829] mt312: W(20): 80
[41068.577740] mt312: W(23): 16 00 48 40 01
[41068.579730] mt312: W(21): 40
[41068.634835] mt312: R(4): 10 8a 30
[41068.634865] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.634880] mt312: mt312_set_frontend: Freq 1951000
[41068.636842] mt312: R(20): 83
[41068.636867] mt312: W(20): c0
[41068.657785] mt312: R(20): c3
[41068.657811] mt312: W(20): 80
[41068.661987] mt312: R(20): 83
[41068.662012] mt312: W(20): 80
[41068.663782] mt312: W(23): 16 00 48 40 01
[41068.666772] mt312: W(21): 40
[41068.671506] mt312: R(4): 10 07 30
[41068.671543] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x07, FEC_STATUS: 0x30
[41068.721382] mt312: R(4): 10 8a 30
[41068.721412] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.721432] mt312: mt312_set_frontend: Freq 1951000
[41068.723378] mt312: R(20): 87
[41068.723399] mt312: W(20): c0
[41068.741311] mt312: R(20): c7
[41068.741336] mt312: W(20): 80
[41068.745296] mt312: R(20): 87
[41068.745316] mt312: W(20): 80
[41068.747442] mt312: W(23): 16 00 08 40 01
[41068.750296] mt312: W(21): 40
[41068.774971] mt312: R(4): 10 8a 30
[41068.775007] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.805141] mt312: R(4): 10 8a 30
[41068.805175] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.805191] mt312: mt312_set_frontend: Freq 1951000
[41068.807384] mt312: R(20): 83
[41068.807409] mt312: W(20): c0
[41068.828329] mt312: R(20): c3
[41068.828361] mt312: W(20): 80
[41068.834074] mt312: R(20): 87
[41068.834094] mt312: W(20): 80
[41068.836412] mt312: W(23): 16 00 08 40 01
[41068.839063] mt312: W(21): 40
[41068.844286] mt312: R(108): 95 df fe
[41068.844312] mt312: agc=00002577 err_db=-2
[41068.849075] mt312: R(9): 3e 09
[41068.857257] mt312: R(4): 10 8a 30
[41068.857287] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.877974] mt312: R(4): 10 8a 30
[41068.878004] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.894433] mt312: R(4): 10 8a 30
[41068.894463] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.894479] mt312: mt312_set_frontend: Freq 1951000
[41068.896915] mt312: R(20): 83
[41068.896934] mt312: W(20): c0
[41068.916112] mt312: R(20): c7
[41068.916147] mt312: W(20): 80
[41068.920088] mt312: R(20): 87
[41068.920112] mt312: W(20): 80
[41068.922532] mt312: W(23): 16 00 48 40 01
[41068.925082] mt312: W(21): 40
[41068.979682] mt312: R(4): 10 8a 30
[41068.979716] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30
[41068.979736] mt312: mt312_set_frontend: Freq 1951000
[41068.981682] mt312: R(20): 83
[41068.981702] mt312: W(20): c0
[41069.003880] mt312: R(20): c3
[41069.003906] mt312: W(20): 80
[41069.008863] mt312: R(20): 83
[41069.008883] mt312: W(20): 80
[41069.012801] mt312: W(23): 16 00 48 40 01
[41069.015847] mt312: W(21): 40
[41069.021725] mt312: R(4): 10 07 30
[41069.021756] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x07, FEC_STATUS: 0x30
[41069.071296] mt312: R(4): 10 8a 30
[41069.071331] mt312: QPSK_STAT_H: 0x10, QPSK_STAT_L: 0x8a, FEC_STATUS: 0x30

The output was indeed longer, I've shortened it a bit because it's the same output again and again.

Best regards,
  Eduard



2008/4/27 Eduard Huguet <eduardhc@xxxxxxxxx>:

Thanks! I'll try it later and let you know the results.

Regards,
  Eduard

2008/4/27 Matthias Schwarzott <zzam@xxxxxxxxxx>:

On Sonntag, 27. April 2008, Eduard Huguet wrote:
> Thank you very much, Matthias. I was going to try the patch right now,
> however I'm finding that it doesn't apply clean to the current HG tree.
> This is what I'm getting:
>
> patching file linux/drivers/media/dvb/frontends/Kconfig
> Hunk #1 FAILED at 368.
> 1 out of 1 hunk FAILED -- saving rejects to file
> linux/drivers/media/dvb/frontends/Kconfig.rej
> patching file linux/drivers/media/dvb/frontends/Makefile
> Hunk #1 succeeded at 23 (offset -2 lines).
> patching file linux/drivers/media/dvb/frontends/zl10036.c
> patching file linux/drivers/media/dvb/frontends/zl10036.h
> patching file linux/drivers/media/video/saa7134/Kconfig
> patching file linux/drivers/media/video/saa7134/saa7134-cards.c
> Hunk #3 succeeded at 5716 (offset 42 lines).
> patching file linux/drivers/media/video/saa7134/saa7134-dvb.c
>
> I've tried to manually patch Kconfig by adding the rejected lines, but I
> suppose there must something I'm doing wrong: apparently it compiles fine,
> but saa7134-dvb is not loaded and the frontend is not being created for the
> card (although the card is detected and the video0 device for analog is
> there).
>

This reject is caused by the massive movement of the hybrid tuner drivers to
another directory.
I solved the reject, and re-uploaded the patch.
Here it does still work.

Regards
Matthias

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb