Hi, I'm still trying to get my avermedia M103 TV card working. I have a Philips-Freevents LX3000 PC, on which I’m running PCLInuxOS, kernel 2.6.22.17.tex3 , this has an Avermedia m103 card installed (it’s a mini PCI card). The chips used in the card are the same as those used in the E506, U5 Philips SAA7135HL/203 CE9498 04 TSG05422 U4 Zarlink MT352 CG 0537A WS U2 XCEIVE XC3018ACQ (cache) 0536ATW K42996 2 and very similar to those used in the A16D, however following the instructions on mcentral.de I seem unable to get TV in XAWTV, TVTime or Kaffine. The following site has managed to get this card working with the experimental code http://plone.lucidsolutions.co.nz/dvb/t/compiling-mcentral-experimental-v4l-dvb-drivers Can you please offer some advice, a couple of things that I think may be the problem are o Do I need to remove the card before I install the experimental code? until now I haven’t because its under the fan, but will if needs must. o Do I need to disable the installed V4L modules in the kernel, and then re-compile the kernel? This seems very scary, but someone on the gentoo pages did it this way, so I’ll give it ago if necessary o How do I get the xc3028 to work, there seems to be 3 different approaches, either download the windows firmware and convert, download the picnnicale firmware (http://mcentral.de/firmware/firmware_pinnacle.tgz), or download the xc3028 firmware (http://mcentral.de/firmware/firmware_v5.tgz) . Thanks in advance for any help, this is much appreciated, & will hopefully mean I can stop using Vista. Regards Rob _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
