Hi, Am Montag, den 21.04.2008, 18:42 +1000 schrieb Amitay Isaacs: > Hi Trevor, > > I have the skeleton driver code ready. The driver calls > tda10048_attach() and I am > getting tda10048_readreg error (ret == -5). I need to find the > demodulator I2C address > for TDA10048 on DTV1000S board. > > Is there any way to find out the demod_address? > > Amitay. tuner as in the logs 0xc0/0x60 and digital demod 0x10 >> 1 or 0x08. You can try to verify it with the saa7134 i2c_scan=1 option. It seems not to have an analog demodulator, so you would use tuner type 4, TUNER_ABSENT for the entry in saa7134-cards.c. You can also add it to auto detection there as a saa7130 device and also add the card in saa7134.h, but you seem to have this all already. Cheers, Hermann > On Mon, Apr 21, 2008 at 3:54 PM, Trevor Boon <trevor_boon@xxxxxxxxx> > wrote: > Hi Amitay, > > Although, this is just speculation, the pcb label is > lr6655 which, afaik, is a Lifeview model code? > > I've had a look at the driver inf file (lr6655.inf) > and can only see three files being used: > > 3xHybrid.sys > NXPMV32.dll > (34CoInstaller.dll) is remarked out in the lr6655.inf > > I can also see 'Proteus' reference board being listed > in the driver .inf file. Does this help? > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
