G'day Melissa, On Tue, Apr 08, 2008 at 11:48:26AM +0930, Melissa Carley wrote: > My system is Gentoo, running 2.6.24 kernel. I have downloaded the > drivers I believe to be accurate > (http://linuxtv.org/hg/~anttip/af9015/) via hg clone, and have done a > make & make install on them from my system. I'm afraid this driver doesn't yet work for this device. > They do not appear in the kernel (I'm not sure if they are meant to?) > and I cannot find them in /lib/modules/<kernelversion> at all. You would normally do 'make install' as root to copy the modules from your build directory to below /lib/modules/<kernelversion> but there's not much point doing that at this time, because the driver doesn't work with the TinyTwin device yet. You can also insmod from the build directory, i.e. insmod ./v4l/dvb-core.ko insmod ./v4l/dvb-pll.ko insmod ./v4l/dvb-usb.ko insmod ./v4l/dvb-af901x.ko > Again, this might seem dumb - but has any one had any luck with > getting this working, and if so can you advise me on a type of > step-by-step procedure? You're doing the correct thing. > Bus 002 Device 003: ID 13d3:3226 IMC Networks (I think this is meant > to be the USB stick?) Yes, this is the one. Nick. -- PGP Key ID = 0x418487E7 http://www.nick-andrew.net/ PGP Key fingerprint = B3ED 6894 8E49 1770 C24A 67E3 6266 6EB9 4184 87E7 _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
