cx23885 and Xc3028 frontend type (ATSC) is not compatible with requested tuning type (OFDM)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear linux-dvb developers,
I own an HP rebranded Hauppauge Express Card shipped with several HP laptops.
I know you recently added support for this device, however I cannot manage to make it work.
Specifically I cannot use the 'scan' utility to generate a channels.conf file usable with me-tv, thus I cannot use the tuner.
I had the same outcomes either with v4l-dvb and patched cx23885 drivers.
Thank you for your support!

here is the output of this tool:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 810000000 0 2 1 3 1 0 0
initial transponder 730000000 0 2 1 3 1 0 0
initial transponder 626000000 0 2 1 3 1 0 0
WARNING: frontend type (ATSC) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (ATSC) is not compatible with requested tuning type (OFDM)
WARNING: frontend type (ATSC) is not compatible with requested tuning type (OFDM)
ERROR: initial tuning failed
dumping lists (0 services)
Done.
here are my card specs:
HP Hauppauge WinTv 885
model 77001 rev d4c0 (Model 77xxx Analog/ATSC Hybrid, Xc3028)
tuner: Xceive xc3028 http://www.xceive.com/technology_XC3028.htm
audio tuner: stereo cx23885
decoder: cx23885 http://www.conexant.com/products/entry.jsp?id=393

The card seems correctly recognised, here is my dmesg output:
[   34.715408] cx23885 driver version 0.0.1 loaded
[   34.715478] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   34.715495] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge WinTV-HVR1500 [card=6,autodetected]
[   34.717889] uvcvideo: disagrees about version of symbol video_devdata
[   34.717891] uvcvideo: Unknown symbol video_devdata
[   34.718209] uvcvideo: disagrees about version of symbol video_unregister_device
[   34.718211] uvcvideo: Unknown symbol video_unregister_device
[   34.718311] uvcvideo: disagrees about version of symbol video_device_alloc
[   34.718313] uvcvideo: Unknown symbol video_device_alloc
[   34.718380] uvcvideo: disagrees about version of symbol video_register_device
[   34.718382] uvcvideo: Unknown symbol video_register_device
[   34.718581] uvcvideo: disagrees about version of symbol video_device_release
[   34.718582] uvcvideo: Unknown symbol video_device_release
[   34.814851] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.25
[   34.814854] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   34.826010] cx23885[0]: i2c bus 0 registered
[   34.826027] cx23885[0]: i2c bus 1 registered
[   34.826041] cx23885[0]: i2c bus 2 registered
[   34.853553] tveeprom 0-0050: Hauppauge model 77001, rev D4C0, serial #68766589
[   34.853556] tveeprom 0-0050: MAC address is 00-0D-FE-23-A3-DB
[   34.853558] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[   34.853561] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[   34.853563] tveeprom 0-0050: audio processor is CX23885 (idx 39)
[   34.853565] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
[   34.853567] tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
[   34.853569] cx23885[0]: hauppauge eeprom: model=77001
[   34.853571] cx23885[0]: cx23885 based dvb card
[   34.980916] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[   34.980921] DVB: registering new adapter (cx23885[0])
[   34.980924] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[   34.981111] cx23885_dev_checkrevision() Hardware revision = 0xb0
[   34.981120] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xbc000000
[   34.981128] PCI: Setting latency timer of device 0000:04:00.0 to 64

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux