Hello,
I bought myself a Hauppauge HVR-1300 today. To get MythTV on my Ubuntu
Hardy box.
I plugged it in, it boots perfect, drivers are getting loaded etc. BUT
i'm getting some writereg errors ...
If anybody would have an id on how I could fix this problem it would be
great!
Here is a copy/paste of the dmesg output (filtered the not needed info)
1.
[ 69.686634] Linux video capture interface: v2.00
2.
[ 69.876814] cx88/2: cx2388x MPEG-TS Driver Manager version
0.0.6 loaded
3.
[ 69.876879] cx88[0]: subsystem: 0070:9601, board: Hauppauge
WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
4.
[ 69.876882] cx88[0]: TV tuner type 63, Radio tuner type -1
5.
[ 69.929361] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
6.
[ 70.022643] tveeprom 2-0050: Hauppauge model 96019, rev D6D3,
serial# 3105276
7.
[ 70.022646] tveeprom 2-0050: MAC address is 00-0D-FE-2F-61-FC
8.
[ 70.022649] tveeprom 2-0050: tuner model is Philips FMD1216MEX
(idx 133, type 4)
9.
[ 70.022651] tveeprom 2-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
10.
[ 70.022653] tveeprom 2-0050: audio processor is CX882 (idx 33)
11.
[ 70.022655] tveeprom 2-0050: decoder processor is CX882 (idx 25)
12.
[ 70.022656] tveeprom 2-0050: has radio, has IR receiver, has IR
transmitter
13.
[ 70.022658] cx88[0]: hauppauge eeprom: model=96019
14.
[ 70.022752] cx88[0]/2: cx2388x 8802 Driver Manager
15.
[ 70.023095] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
16.
[ 70.023105] ACPI: PCI Interrupt 0000:02:08.2[A] -> Link [APC3]
-> GSI 18 (level, low) -> IRQ 18
17.
[ 70.023113] cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 18,
latency: 32, mmio: 0xfb000000
18.
[ 70.023151] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3]
-> GSI 18 (level, low) -> IRQ 18
19.
[ 70.023157] cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 18,
latency: 32, mmio: 0xfa000000
20.
[ 70.314384] wm8775 2-001b: chip found @ 0x36 (cx88[0])
21.
[ 70.318446] cx88[0]/0: registered device video0 [v4l2]
22.
[ 70.318462] cx88[0]/0: registered device vbi0
23.
[ 70.318475] cx88[0]/0: registered device radio0
24.
[ 70.386235] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
25.
[ 70.386240] ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA]
-> GSI 20 (level, low) -> IRQ 20
26.
[ 70.386311] PCI: Setting latency timer of device 0000:00:0e.1 to 64
27.
[ 70.476456] cx88/2: cx2388x dvb driver version 0.0.6 loaded
28.
[ 70.476460] cx88/2: registering cx8802 driver, type: dvb
access: shared
29.
[ 70.476463] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge
WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
30.
[ 70.476466] cx88[0]/2: cx2388x based DVB/ATSC card
31.
[ 70.500678] phy0: Selected rate control algorithm 'simple'
32.
[ 70.588346] input: PC Speaker as
/devices/platform/pcspkr/input/input6
33.
[ 70.907743] DVB: registering new adapter (cx88[0])
34.
[ 70.907748] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
35.
[ 71.083319] cx2388x blackbird driver version 0.0.6 loaded
36.
[ 71.083323] cx88/2: registering cx8802 driver, type: blackbird
access: shared
37.
[ 71.083326] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge
WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
38.
[ 71.083330] cx88[0]/2: cx23416 based mpeg encoder (blackbird
reference design)
39.
[ 71.084521] cx88[0]/2: registered device video1 [mpeg]
40.
41.
[ 78.788278] cx22702_readreg: readreg error (ret == -121)
42.
[ 78.788913] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x00, ret == -121)
43.
[ 78.789494] cx22702_readreg: readreg error (ret == -121)
44.
[ 78.790066] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
45.
[ 78.800513] cx22702_readreg: readreg error (ret == -121)
46.
[ 78.801139] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x00, ret == -121)
47.
[ 78.801717] cx22702_readreg: readreg error (ret == -121)
48.
[ 78.802302] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
49.
[ 78.810709] cx22702_readreg: readreg error (ret == -121)
50.
[ 78.811329] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x00, ret == -121)
51.
[ 78.811907] cx22702_readreg: readreg error (ret == -121)
52.
[ 78.812465] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
53.
[ 78.818835] cx22702_readreg: readreg error (ret == -121)
54.
[ 78.819455] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x00, ret == -121)
55.
[ 78.820035] cx22702_readreg: readreg error (ret == -121)
56.
[ 78.820595] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
57.
[ 78.839544] cx88[0]/2-bb: Firmware and/or mailbox pointer not
initialized or corrupted
58.
[ 81.527690] cx88[0]/2-bb: Firmware upload successful.
59.
[ 81.535759] cx88[0]/2-bb: Firmware version is 0x02060039
60.
[ 81.598038] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4
61.
62.
[ 95.317798] cx22702_writereg: writereg error (reg == 0x00, val
== 0x02, ret == -121)
63.
[ 95.323842] cx22702_writereg: writereg error (reg == 0x00, val
== 0x00, ret == -121)
64.
[ 95.324262] cx22702_writereg: writereg error (reg == 0x0b, val
== 0x06, ret == -121)
65.
[ 95.324667] cx22702_writereg: writereg error (reg == 0x09, val
== 0x01, ret == -121)
66.
[ 95.324986] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x41, ret == -121)
67.
[ 95.325310] cx22702_writereg: writereg error (reg == 0x16, val
== 0x32, ret == -121)
68.
[ 95.326737] cx22702_writereg: writereg error (reg == 0x20, val
== 0x0a, ret == -121)
69.
[ 95.327090] cx22702_writereg: writereg error (reg == 0x21, val
== 0x17, ret == -121)
70.
[ 95.327291] cx22702_writereg: writereg error (reg == 0x24, val
== 0x3e, ret == -121)
71.
[ 95.327490] cx22702_writereg: writereg error (reg == 0x26, val
== 0xff, ret == -121)
72.
[ 95.327689] cx22702_writereg: writereg error (reg == 0x27, val
== 0x10, ret == -121)
73.
[ 95.327888] cx22702_writereg: writereg error (reg == 0x28, val
== 0x00, ret == -121)
74.
[ 95.328087] cx22702_writereg: writereg error (reg == 0x29, val
== 0x00, ret == -121)
75.
[ 95.328286] cx22702_writereg: writereg error (reg == 0x2a, val
== 0x10, ret == -121)
76.
[ 95.328487] cx22702_writereg: writereg error (reg == 0x2b, val
== 0x00, ret == -121)
77.
[ 95.328691] cx22702_writereg: writereg error (reg == 0x2c, val
== 0x10, ret == -121)
78.
[ 95.328889] cx22702_writereg: writereg error (reg == 0x2d, val
== 0x00, ret == -121)
79.
[ 95.329088] cx22702_writereg: writereg error (reg == 0x48, val
== 0xd4, ret == -121)
80.
[ 95.329287] cx22702_writereg: writereg error (reg == 0x49, val
== 0x56, ret == -121)
81.
[ 95.329487] cx22702_writereg: writereg error (reg == 0x6b, val
== 0x1e, ret == -121)
82.
[ 95.329685] cx22702_writereg: writereg error (reg == 0xc8, val
== 0x02, ret == -121)
83.
[ 95.329884] cx22702_writereg: writereg error (reg == 0xf9, val
== 0x00, ret == -121)
84.
[ 95.330083] cx22702_writereg: writereg error (reg == 0xfa, val
== 0x00, ret == -121)
85.
[ 95.330285] cx22702_writereg: writereg error (reg == 0xfb, val
== 0x00, ret == -121)
86.
[ 95.331619] cx22702_writereg: writereg error (reg == 0xfc, val
== 0x00, ret == -121)
87.
[ 95.331941] cx22702_writereg: writereg error (reg == 0xfd, val
== 0x00, ret == -121)
88.
[ 95.333750] cx22702_writereg: writereg error (reg == 0xf8, val
== 0x02, ret == -121)
89.
[ 95.333949] cx22702_readreg: readreg error (ret == -121)
90.
[ 95.334148] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
91.
[ 95.334347] cx22702_readreg: readreg error (ret == -121)
92.
[ 95.334546] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x00, ret == -121)
93.
[ 95.334941] cx22702_readreg: readreg error (ret == -121)
94.
[ 95.335140] cx22702_writereg: writereg error (reg == 0x0d, val
== 0x01, ret == -121)
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
