Thanks for the help, I am getting further but still am not getting any video. Running scan produces a channels.conf, here is the line generated for what I am trying to watch. (DVB-T). Mplayer doesnt appear to be able to read from the device, someone said to cat /dev/dvb/adapter0/dvr0 > test.ts and the file should get larger. Tried that but the file stayed empty.
Does anyone know how I can find out what is going wrong.
Thanks
Mike
TV3:698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:1300
dvb_streaming_start(PROG: TV3, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null))
PROGRAM NUMBER 0: name=TV3, freq=698000000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=4, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=5, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=6, CNT=2
DVB_SET_CHANNEL: new channel name=TV3, card: 0, channel 0
dvb_tune Freq: 698000000
TUNE_IT, fd_frontend 3, fd_sec 0
freq 698000000, srate 0, pol H, tone 0, specInv, diseqc 17909558, fe_modulation_t modulation,fe_code_rate_t HP_CodeRate, fe_transmit_mode_t TransmissionMode,fe_guard_interval_t guardInterval, fe_bandwidth_t bandwidth
Using DVB card "Conexant CX22702 DVB-T"
tuning DVB-T to 698000000 Hz, bandwidth: 0
Getting frontend status
Bit error rate: 193
Signal strength: 15163
SNR: 65342
UNC: 0
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
SET PES FILTER ON PID 450 to fd 4, RESULT: 0, ERRNO: 0
SET PES FILTER ON PID 400 to fd 5, RESULT: 0, ERRNO: 0
SET PES FILTER ON PID 0 to fd 6, RESULT: 0, ERRNO: 0
SUCCESSFUL EXIT from dvb_streaming_start
STREAM: [dvbin] dvb://0@TV3
STREAM: Description: Dvb Input
STREAM: Author: Nico
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for MPEG-TS...
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 4 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 3 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, attempt N. 1 failed with errno 0 when reading 2048 bytes
dvb_streaming_read, return 0 bytes
THIS DOESN'T LOOK LIKE AN MPEG-TS FILE!
TRIED UP TO POSITION 0, FOUND ffffff00, packet_size= 0, SEEMS A TS? 0
DVBIN_CLOSE, close(2), fd=6, COUNT=2
DVBIN_CLOSE, close(1), fd=5, COUNT=1
DVBIN_CLOSE, close(0), fd=4, COUNT=0
vo: x11 uninit called but X11 not inited..
Exiting... (End of file)
On Sun, Mar 30, 2008 at 10:07 PM, Ulrich Eckhardt <uli-dvb@xxxxxxxxxxxxxxx> wrote:
Mike Russell wrote:Hi,
> Hi
>
> I am currently having problems getting this card working under 2.6.24
> for DVB-T. The driver appears to load ok, but produces errors in dmesg
> when attempting to scan for channels.
it seems to me, that you use the original drivers from the linux kernel.
Installing the drivers as described in
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-3000
workes for kernel 2.6.24-4.
Uli
--
Ulrich Eckhardt http://www.uli-eckhardt.de
Ein Blitzableiter auf dem Kirchturm ist das denkbar stärkste
Misstrauensvotum gegen den lieben Gott. (Karl Krauss)
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
