Hi Adam,
> I wonder whether this is related to your problem?
> lsmod lists tuner_xc2028 loaded, as this is the tuner on the card (see my
> kernel's messages below.) By removing that module you may have tricked the
> kernel into thinking the module is loaded and ready when it's not, hence
> the crash.
I know, the module is necessary for the CARD to work properly.
When I don't exclude it from modules.dep the PC doesn't boot normally.
That's my problem.
The init of xc2028 seg faults.
WITH tuner-xc2028 in /lib/modules/2.6.22-14-generic/modules.dep
modprobe FAILS during the boot-phase.
> Maybe you could get around it my manually inserting that module first,
> before anything else?
Let's see if we get more debug-details.
I rmmod'ed all modules and re-installed them in the following sequence:
modprobe -v dvb-core debug=1
modprobe -v dvb-usb debug=1
modprobe -v dvb-pll debug=1
modprobe -v tuner-xc2028 debug=1
modprobe -v zl10353 debug=1
modprobe -v dvb-usb-cxusb debug=1
The last modprobe added to /var/log/kern.log:
----------------------------------------------------------------------
kernel: [20347.882552] check for warm 1660 932
kernel: [20347.882557] check for cold fe9 d500
kernel: [20347.882559] check for warm fe9 d501
kernel: [20347.882561] check for cold fe9 db50
kernel: [20347.882563] check for warm fe9 db51
kernel: [20347.882565] check for cold fe9 db54
kernel: [20347.882566] check for warm fe9 db55
kernel: [20347.882568] check for cold fe9 db58
kernel: [20347.882570] check for warm fe9 db59
kernel: [20347.882572] check for cold fe9 db00
kernel: [20347.882574] check for warm fe9 db01
kernel: [20347.882576] check for cold fe9 db10
kernel: [20347.882578] check for warm fe9 db11
kernel: [20347.882580] check for warm fe9 db78
kernel: [20347.882582] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state.
kernel: [20347.882588] power control: 1
kernel: [20347.885522] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
kernel: [20347.885760] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4)
kernel: [20348.041391] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
kernel: [20348.041615] xc2028: Xcv2028/3028 init called!
kernel: [20348.041618] xc2028: video_dev =0000000000000000
kernel: [20348.041774] xc2028: usage count is 31
kernel: [20348.041796] general protection fault: 0000 [1] SMP
kernel: [20348.041800] CPU 0
kernel: [20348.041803] Modules linked in: dvb_usb_cxusb zl10353 tuner_xc2028 dvb_pll dvb_usb dvb_core compat_ioctl32 videodev v4l1_compat ir_common v4l2_common tveeprom snd_rtctimer binfmt_misc rfcomm l2cap bluetooth vboxdrv ppdev acpi_cpufreq cpufreq_stats cpufreq_conservative cpufreq_ondemand freq_table cpufreq_userspace cpufreq_powersave container ac video sbs dock button battery ext2 coretemp w83627ehf i2c_isa sbp2 parport_pc lp parport loop snd_hda_intel snd_pcm_oss snd_mixer_oss ipv6 snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd sky2 nvidia(P) psmouse soundcore pcspkr serio_raw intel_agp snd_page_alloc i2c_core iTCO_wdt iTCO_vendor_support shpchp pci_hotplug evdev ext3 jbd mbcache sg sd_mod sr_mod cdrom usb_storage ide_core libusual ohci1394 ieee1394 ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan fuse apparmor commoncap
kernel: [20348.041871] Pid: 6629, comm: modprobe Tainted: P 2.6.22-14-generic #1
kernel: [20348.041874] RIP: 0010:[_end+136964174/2130324728] [_end+136964174/2130324728] :tuner_xc2028:xc2028_attach+0x166/0x240
kernel: [20348.041882] RSP: 0018:ffff810125495bd8 EFLAGS: 00010206
kernel: [20348.041886] RAX: 0020000000a08c00 RBX: ffffffff88900500 RCX: 0000000000000080
kernel: [20348.041889] RDX: 00000000ffffffff RSI: ffffffff888fe1a0 RDI: ffff81013143ce78
kernel: [20348.041892] RBP: ffff810125495c08 R08: 0000000000000000 R09: 0000000000000000
kernel: [20348.041895] R10: 0000000000000000 R11: 0000000000000005 R12: ffff81013143cc08
kernel: [20348.041898] R13: 0000000000000000 R14: ffff810103e6c040 R15: 0000000000000000
kernel: [20348.041902] FS: 00002b8069e836e0(0000) GS:ffffffff80561000(0000) knlGS:0000000000000000
kernel: [20348.041906] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
kernel: [20348.041908] CR2: 00000000008fcf80 CR3: 000000016c864000 CR4: 00000000000006e0
kernel: [20348.041912] Process modprobe (pid: 6629, threadinfo ffff810125494000, task ffff81016554d4a0)
kernel: [20348.041915] Stack: ffff810100000000 ffff810103e6cdb8 0000000000000000 ffff810103e6cdb0
kernel: [20348.041921] ffff810103e6c000 ffffffff88c3ed7b ffff810103e6ca28 0000000000000061
kernel: [20348.041927] 0000000000000000 0000000000000000 ffffffff88c3f420 0000000000000000
kernel: [20348.041931] Call Trace:
kernel: [20348.041941] [_end+140384883/2130324728] :dvb_usb_cxusb:cxusb_dvico_xc3028_tuner_attach+0x5b/0xe0
kernel: [20348.041949] [_end+140386584/2130324728] :dvb_usb_cxusb:dvico_bluebird_xc2028_callback+0x0/0xa0
kernel: [20348.041958] [_end+136916456/2130324728] :dvb_usb:dvb_usb_adapter_frontend_init+0x80/0x100
kernel: [20348.041965] [_end+136914564/2130324728] :dvb_usb:dvb_usb_device_init+0x40c/0x650
kernel: [20348.041980] [_end+140381683/2130324728] :dvb_usb_cxusb:cxusb_probe+0xab/0x100
kernel: [20348.041998] [_end+127797193/2130324728] :usbcore:usb_probe_interface+0xd1/0x120
kernel: [20348.042010] [driver_probe_device+163/432] driver_probe_device+0xa3/0x1b0
kernel: [20348.042018] [__driver_attach+201/208] __driver_attach+0xc9/0xd0
kernel: [20348.042024] [__driver_attach+0/208] __driver_attach+0x0/0xd0
kernel: [20348.042029] [bus_for_each_dev+77/128] bus_for_each_dev+0x4d/0x80
kernel: [20348.042039] [bus_add_driver+175/496] bus_add_driver+0xaf/0x1f0
kernel: [20348.042057] [_end+127795617/2130324728] :usbcore:usb_register_driver+0xa9/0x120
kernel: [20348.042066] [_end+128015635/2130324728] :dvb_usb_cxusb:cxusb_module_init+0x1b/0x35
kernel: [20348.042072] [sys_init_module+411/6576] sys_init_module+0x19b/0x19b0
kernel: [20348.042101] [system_call+126/131] system_call+0x7e/0x83
kernel: [20348.042112]
kernel: [20348.042114]
kernel: [20348.042114] Code: 8b 90 10 03 00 00 48 8b 73 28 31 c0 0f b6 c9 49 c7 c0 61 e4
kernel: [20348.042126] RIP [_end+136964174/2130324728] :tuner_xc2028:xc2028_attach+0x166/0x240
kernel: [20348.042132] RSP <ffff810125495bd8>
----------------------------------------------------------------------
'xc2028: video_dev =0000000000000000' looks strange.
I don't know why just one adapter is found.
$ lsmod | grep i2c
----------------------------------------------------------------------
i2c_isa 6400 1 w83627ehf
i2c_core 30208 9 zl10353,tuner_xc2028,dvb_pll,dvb_usb,v4l2_common,tveeprom,w83627ehf,i2c_isa,nvidia
----------------------------------------------------------------------
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level,
> high) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4)
> DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
> xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
That tuner_info isn't executed on my system.
Seems the memcpy before breaks.
--- tuner-xc2028.c ---
memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
sizeof(xc2028_dvb_tuner_ops));
--- tuner-xc2028.c ---
Thank you for including the log of a working installation.
Regards, Thomas
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
