Hi, ldvb@xxxxxxxxxxxxx schrieb: > On Thu, 20 Mar 2008, Oliver Endriss wrote: > >> Sorry, if you want to have your problem fixed, you have dig through the >> register programming of the frontend driver. Use an i2c sniffer and >> compare the register settings of the the windows driver with those of >> the linux driver... >> If you want to experiment with some parameters, you might have a look at >> changeset >> http://linuxtv.org/hg/v4l-dvb/rev/8a19aa788239 >> Maybe you can find a better register setting which fixes your problem. > > Increased baseband cut-off helps! (tda826*.c) > so, making it > buf[6] = 0xfe; > solves the problem. > Maybe, I'll check other values. > This might be right! I could not get good information regarding the transponder bandwidths. We might need to make this depend on the symbol rate or a module parameter. Can we grind this out after easter? Best regards Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
