On Tue, 18 Mar 2008 22:14:41 +0100 gian luca rasponi <lucarasp@xxxxxxxxx> wrote: > hi, > > more or less same here: > > I've built and installed latest v4l-dvb-3029b981e42c modified with IR > remote support, and loaded with: > > /etc/modprobe.d/saa7134: > > options saa7134 tuner=71 ir_debug=1 > install saa7134 /sbin/modprobe xc3028-tuner; /sbin/modprobe > --ignore-install saa7134; /sbin/modprobe saa7134-dvb; /sbin/modprobe > saa7134-alsa > > then: > > modprobe saa7134 tuner=71 i2c_scan=1 Please test without tuner=71. I've just updated the tree again. It should detect it well right now. Please add this to your modprobe.conf: options tuner debug=1 options tuner-xc2028 debug=1 This will enable some extra debugs for tuner. You'll need to remove all modules before probing again. A good procedure for tests is: make rmmod make make install modprobe saa7124 i2c_scan=1 (sometimes, I also do a "make rminstall" to remove .gz modules that some distro uses, when I compile against a non-mainstream kernel) Cheers, Mauro _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb