Hi again! New experiment with TT-budget S-1401 shows the next result: using 2 boxes - one with Linux for error detection and one with Windows for control. Both are connected via the passive splitter to the sat. So, on Windows ProgDVB is running, controlling the transponder. And it works fine, without errors, showing the free prog. Linux box with the similar card shows errors in the stream (at the same time): Tuner status: Signal Lock Carrier VITERBI Sync Signal Strength = 59% SNR = 66% BER = 138c Uncorrected Blocks = 9 Note: strength on the windows box is 78% (10db from 88 were eaten by the splitter). Seems, that the problem is not with diseqc control. Any ideas? Thanx! _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
