Problem with new Terratec Cinergy C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

I've been running a MythTV-box on top of Ubuntun Feisty for a year now without a hitch, using Technotrend C-1500 Budget card. Now I bought the new Terratec Cinergy C and installed the Mantis drivers I got from http://jusst.de/hg/mantis/summary. After this I got everything working fine in my Myth, but after a few days I there appeared to be a pattern where the whole machine just stops responding. This occurs every 12-24 hours and the source of it is quite hard to make out because obviously theres nothing in the logs.

I have tried with another Cinergy-card but the result is the same, it can't be a hardware problem. I dunno if the problem is the driver of the cinergy or perhaps the installation of mantis somehow broke the TT-card..

Help would be much appreaciated.

Here's dmeg from the box.

[   30.139218] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   30.139267] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   30.200008] saa7146: register extension 'budget_ci dvb'.
[   30.200624] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   30.200636] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (lev
el, low) -> IRQ 17
[   30.200665] saa7146: found saa7146 @ mem ffffc2000007a000 (revision 1, irq 17
) (0x13c2,0x1010).
[   30.200673] saa7146 (0): dma buffer size 192512
[   30.200676] DVB: registering new adapter (TT-Budget-C-CI PCI)
[   30.207133] lirc_dev: IR Remote Control driver registered, at major 61
[   30.220252] lirc_mceusb2: no version for "lirc_get_pdata" found: kernel taint
ed.
[   30.220817]
[   30.220818] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE
2005 Remote Control driver for LIRC $Revision: 1.25 $
[   30.220822] lirc_mceusb2: Daniel Melander <lirc@xxxxxxxxxx>, Martin Blatter <
martin_a_blatter@xxxxxxxxx>
[   30.246198] adapter has MAC addr = 00:d0:5c:67:c3:51
[   30.246541] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/inpu
t2
[   30.395167] input: PC Speaker as /class/input/input3
[   30.397327] DVB: registering frontend 0 (ST STV0297 DVB-C)...
[   30.398064] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   30.398075] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (lev
el, low) -> IRQ 16
[   30.398102] irq: 16, latency: 32
[   30.398103]  memory: 0xfdaff000, mmio: 0xffffc2000007c000
[   30.398106] found a VP-2040 PCI DVB-C device on (04:08.0),
[   30.398108]     Mantis Rev 1 [153b:1178], irq: 16, latency: 32
[   30.398112]     memory: 0xfdaff000, mmio: 0xffffc2000007c000
[   30.401025]     MAC Address=[00:08:ca:1c:76:40]
[   30.401103] mantis_alloc_buffers (0): DMA=0x35200000 cpu=0xffff810035200000 s
ize=65536
[   30.401111] mantis_alloc_buffers (0): RISC=0x37514000 cpu=0xffff810037514000
size=1000
[   30.401115] DVB: registering new adapter (Mantis dvb adapter)
[   30.402068] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   30.402072] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (lev
el, low) -> IRQ 16
[   30.402081] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   30.414831] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66
)
[   30.414839] Uniform CD-ROM driver Revision: 3.20
[   30.461051] usb 2-4: reset full speed USB device using ohci_hcd and address 2
[   30.487089] parport: PnPBIOS parport detected.
[   30.487121] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   30.692119] lirc_dev: lirc_register_plugin: sample_rate: 0
[   30.696827] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb2:2
[   30.696863] usbcore: registered new interface driver lirc_mceusb2
[   30.952465] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[   30.954581] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TD
A10023) @ 0x0c
[   30.954584] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend at
tach success
[   30.954590] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
[   30.954776] NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9631  Thu No
v  9 17:35:27 PST 2006
[   30.956655] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   30.956661] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (lev
el, low) -> IRQ 22
[   30.956683] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   31.512368] lp0: using parport0 (interrupt-driven).
[   31.579263] /home/user/imon/imon_vfd.c: Driver for Soundgraph iMON VFD, v0.
1a1
[   31.579267] /home/user/imon/imon_vfd.c: Venky Raju <dev@xxxxxxxx>
[   31.632597] /home/user/imon/imon_vfd.c: imon_probe: found IMON device
[   31.634115] /home/user/imon/imon_vfd.c: imon_probe: iMON device on usb<2:3>
 initialized
[   31.634135] usbcore: registered new interface driver imon
[   38.091485] mantis_ack_wait (0): Slave RACK Fail !
[   38.161365] it87: Found IT8716F chip at 0x290, revision 1
[   38.161376] it87: in3 is VCC (+5V)
[   38.161377] it87: in7 is VCCH (+5V Stand-By)
[   38.313108] Adding 1951888k swap on /dev/disk/by-uuid/3aa3c26c-72d8-48e1-9811
-0381f0a69f84.  Priority:-1 extents:1 across:1951888k
[   38.464543] EXT3 FS on sda1, internal journal
[   38.788755] NET: Registered protocol family 10
[   38.788858] lo: Disabled Privacy Extensions
[   39.074026] kjournald starting.  Commit interval 5 seconds
[   39.074325] EXT3 FS on sda3, internal journal
[   39.074329] EXT3-fs: mounted filesystem with ordered data mode.
[  166.753898] mantis start feed & dma
[  166.754125] mantis stop feed and dma
[  166.759769] mantis start feed & dma
[  471.590289] mantis stop feed and dma
[  471.731867] mantis start feed & dma
[  776.752261] mantis stop feed and dma
[  776.828644] mantis start feed & dma
[ 1081.866319] mantis stop feed and dma
[ 1081.944235] mantis start feed & dma
[ 1386.916520] mantis stop feed and dma
[ 1386.989831] mantis start feed & dma


I'm using the EIT-info, so MythTV is doing this EITScanner quite often to check for new channel-info, so that may be the root of the problem.

Here's a log from mythbackend.log just before the machine once again stopped responding:

2008-03-13 07:22:17.810 Reschedule requested for id -1.
2008-03-13 07:22:17.844 Scheduled 12 items in 0.0 = 0.01 match + 0.02 place
2008-03-13 07:22:17.848 scheduler: Last message repeated 3 times: Scheduled item
s: Scheduled 12 items in 0.0 = 0.02 match + 0.02 place
2008-03-13 07:22:17.852 scheduler: Scheduled items: Scheduled 12 items in 0.0 =
0.01 match + 0.02 place
2008-03-13 07:22:47.305 EITScanner: Added 303 EIT Events
2008-03-13 07:23:16.931 DVBTuning Warning: Invalid inversion, aborting, falling
back to 'auto'
2008-03-13 07:23:17.584 EITScanner: Now looking for EIT data on multiplex of cha
nnel 3
2008-03-13 07:25:53.206 EITScanner: Added 1 EIT Events
2008-03-13 07:25:53.213 Reschedule requested for id -1.
2008-03-13 07:25:53.249 Scheduled 12 items in 0.0 = 0.02 match + 0.02 place
2008-03-13 07:25:53.253 scheduler: Scheduled items: Scheduled 12 items in 0.0 =
0.02 match + 0.02 place


Br, Jarno

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux