On Fri, Mar 7, 2008 at 1:18 AM, Brandon Rader <brandon.rader@xxxxxxxxx> wrote: > Hello, > > I bought the PCTV HD 800i tuner from woot.com, and waited until drivers had > been developed for it. I followed the guide from > LinuxTV<http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Card_%28800i%29> > . > > My dmesg and lspci outputs are below. The dmesg output has some errors in > it, and the lspci looks like it is an entry short compared to some of the > other lspci outputs I've seen for this card. When I try to modprobe > cx88_dvb: > > $ sudo modprobe cx88_dvb > FATAL: Error inserting cx88_dvb > (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/cx88/cx88-dvb.ko): > No such device > > lspci output: > lspci | grep -i cx > 06:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and > Audio Decoder [MPEG Port] (rev 05) > 06:07.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio > Decoder [Audio Port] (rev 05) > > dmesg output: > dmesg | grep -i cx > <snipped> Did you reboot after installing the new driver? If not, try that first. If you did reboot and got the error, can you paste your *complete* dmesg output to http://pastebin.com and post the generated link here? BTW, I added cc to the linux-dvb list, which is the more appropriate place for your question. -- Chaogui Zhang _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
