Hi there, I've got the following card: http://www.twinhan.com/product_cable_2033.asp I am running Ubunu 7.10 with kernel 2.6.22-14-generic I have compiled and installed the latest drivers from http://jusst.de/hg/mantis and it seems to detect the card correctly but when scanning for channels it fails. The card works correctly in windows. This is what dmesg gives me: ... [ 4022.137802] found a VP-2033 PCI DVB-C device on (05:05.0), [ 4022.137803] Mantis Rev 1 [1822:0008], irq: 23, latency: 64 [ 4022.137805] memory: 0xfdaff000, mmio: 0xf8abc000 [ 4022.140491] MAC Address=[00:08:ca:1c:2e:4b] [ 4022.140502] mantis_alloc_buffers (0): DMA=0x2e830000 cpu=0xee830000 size=65536 [ 4022.140506] mantis_alloc_buffers (0): RISC=0x2e819000 cpu=0xee819000 size=1000 [ 4022.140508] DVB: registering new adapter (Mantis dvb adapter) [ 4022.656841] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 4022.658236] TDA10021: i2c-addr = 0x0c, id = 0x7d [ 4022.658238] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10021) @ 0x0c [ 4022.658240] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 4022.658243] DVB: registering frontend 0 (Philips TDA10021 DVB-C)... ... When trying to scan it simply gives me the following result: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 370000000 6875000 0 3 >>> tune to: 370000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING:>>> tuning failed!!! >>> tune to: 370000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed) >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING:>>> tuning failed!!! Is there any way i can debug the driver to see where it goes wrong? If there is anything i can do, I would be glad to help out. Any help would be greatly appreciated. Best regards, Rikard Wissing _________________________________________________________________ Mörkt och kallt? Kanske Barcelona? http://search.live.com/results.aspx?q=Barcelona+reseguide&form=QBRE _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
