Thierry Lelegard wrote:
>> I'm trying to read from /dev/dvb/adapter0/dvr0.
>> The problem is that the process reading sometimes is not fast enough and after a while I get errno
>> 75 when I try to read from it.
>>
>> On average the speed is ok, so it should work.
>> There must be a buffer behind dvr0 that goes in error onece it is full.
>>
>> 1) how can I make it bigger?
>> 2) how can I check how full it is?
>
> You can set the *demux* buffer size, upstream from dvr, using ioctl DMX_SET_BUFFER_SIZE.
> The default value is 8 kB. Using 1 MB, I can do full TS capture without any loss.
>
>
I've noticed that there are 2 ioctl DMX_SET_BUFFER_SIZE, one for the demux, one for the dvr.
The second is not implemented.
switch (cmd) {
case DMX_SET_BUFFER_SIZE:
// FIXME: implement
ret = 0;
break;
Could you please help me:
1) how many ringbuffers are there?
2) I'm reading from dvr, which one do I need to set?
3) I can try to implement the above code if needed.
Cheers
Andrea
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
