well it looks like i could be stuffed just found the new windows driver and they call it a dual 5 heres a snip of the driver.inf %AvsBluebird.DVBT_Dual.DeviceDesc% =Bluebird2.DVBT_NANO2, USB\VID_0FE9&PID_DB78 ; DUAL4 (XC3028+Zarlink) %AvsBluebird.DVBT_Hawk1.DeviceDesc% =Bluebird2.DVBT_HAWK1, USB\VID_0FE9&PID_DB80 ; Firehawk1 (DNOS504Z) %AvsBluebird.DVBT_Dual5.DeviceDesc% =Bluebird2.DVBT_NANO_DIB1, USB\VID_0FE9&PID_DB98 ; DUAL5 (DIB7070PA x 2) note Dual 5 thats my card link to driver ftp://ftp.dvico.com/Products/FusionHDTV/Down/FusionHDTV3.66.01Web.exe looks like we could be stuffed ----- Original Message ----- From: "Adam Nielsen" <a.nielsen@xxxxxxxxxxx> To: "Martin Thompson" <mandm.thompson@xxxxxxxxx> Sent: Friday, February 29, 2008 7:36 AM Subject: Re: dvico dual digital 4 revision 2.0 >> if i change the id in the usb id file the it finds it and loads >> the card apperas as a dvb 0, 1 >> but dmeg shows frontend not loaded > > That sounds like you haven't changed the USB IDs in the firmware loading > code - presumably it uses the IDs to figure out which firmware files to > load, and if it doesn't know about the IDs it doesn't even try to load > any firmware. > > I think you need to figure out how to force it to load some firmware > files before you can get any further. > > Cheers, > Adam. > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
